DOI QR코드

DOI QR Code

High temperature resistance of self-compacting lightweight mortar incorporating expanded perlite and pumice

  • Karatas, Mehmet (Department of Civil Engineering, Firat University) ;
  • Balun, Bilal (Department of Civil Engineering, Bingol University) ;
  • Benli, Ahmet (Department of Civil Engineering, Bingol University)
  • 투고 : 2016.07.19
  • 심사 : 2016.10.28
  • 발행 : 2017.02.25

초록

This paper presents the effect of aggregate type on high temperature resistance of self-compacting mortars (SCM) produced with normal and lightweight aggregates like expanded perlite and pumice. Silica fume (SF) and fly ash (FA) were used as mineral additives. Totally 13 different mixtures were designed according to the aggregate rates. Mini slump flow, mini V-funnel and viscometer tests were carried out on the fresh mortar. On the other hand, bulk density, porosity, water absorption and high temperature tests were made on the hardened SCM. After being heated to temperatures of 300, 600 and $900^{\circ}C$, respectively, the tensile strength in bending and compressive strength of mortars determined. As a result of the experiments, the increase in the use of lightweight aggregate increased total water absorption and porosity of mortars. It is observed that, the increment in the usage of lightweight aggregate decreased tensile strength in bending and compressive strengths of mortar specimens exposed to high temperatures but the usage of up to 10% expanded perlite in mortar increased the compressive strength of specimens exposed to $300^{\circ}C$.

키워드

과제정보

연구 과제 주관 기관 : Firat University Scientific Research Projects Office

참고문헌

  1. Abdulkareem, O.A., Al Bakri, A.M.M., Kamarudin, H., Nizar, I.K. and Saif, A.A. (2014), "Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete", Constr. Build. Mater., 50, 377-387. https://doi.org/10.1016/j.conbuildmat.2013.09.047
  2. Al-Khaiat, H. and Haque, M.N. (1998), "Effect of initial curing on early strength and physical properties of a lightweight concrete", Cement Concrete Res., 28(6), 859-866. https://doi.org/10.1016/S0008-8846(98)00051-9
  3. Arioz, O. (2007), "Effects of elevated temperatures on properties of concrete", Fire Safety J., 42(8), 516-522. https://doi.org/10.1016/j.firesaf.2007.01.003
  4. ASTM C305 (2002), Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency.
  5. Aydin, S. (2008), "Development of a high-temperature-resistant mortar by using slag and pumice", Fire Safety J., 43(8), 610-617. https://doi.org/10.1016/j.firesaf.2008.02.001
  6. Aydin, S. and Baradan, B. (2007), "Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars", Cement Concrete Res., 37(6), 988-995. https://doi.org/10.1016/j.cemconres.2007.02.005
  7. Bakhtiyari, S., Allahverdi, A. and Rais-Ghasemi, M. (2014), "A case study on modifying the fire resistance of self-compacting concrete with expanded perlite aggregate and zeolite powder additives", Asian J. Civil Eng., 15(3), 339-349.
  8. Barats, D., Leitus, G., Popovitz-Biro, R., Shimon, L.J.W. and Neumann, R. (2008), "A stable "end-on" iron(III)-hydroperoxo complex in water derived from a multi-iron(II)-substituted polyoxometalate and molecular oxygen", Angew. Chem. Ed., 47(51), 9908-9912. https://doi.org/10.1002/anie.200803966
  9. Barbhuiya, S. (2011), "Effects of fly ash and dolomite powder on the properties of self-compacting concrete", Constr. Build. Mater., 25(8), 3301-3305. https://doi.org/10.1016/j.conbuildmat.2011.03.018
  10. Bentz, D.P. (2000), "Fibers, percolation, and spalling of highperformance concrete", ACI Mater. J., 97(3), 351-359.
  11. Bingol, A.F. and Gul, R. (2004), "Compressive strength of lightweight aggregate concrete exposed to high temperatures", Ind. J. Eng. Mater. Sci., 11(1), 68-72.
  12. Bonavetti, V., Donza, H., Menendez, G., Cabrera, O. and Irassar, E.F. (2003), "Limestone filler cement in low w/c concrete: A rational use of energy", Cement Concrete Res., 33(6), 865-871. https://doi.org/10.1016/S0008-8846(02)01087-6
  13. Bosiljkov, V.B. (2003), "SCC mixes with poorly graded aggregate and high volume of limestone filler", Cement Concrete Res., 33(9), 1279-1286. https://doi.org/10.1016/S0008-8846(03)00013-9
  14. Chan, Y.N., Peng, G.F. and Anson, M. (1999), "Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures", Cement Concrete Compos., 21(1), 23-27. https://doi.org/10.1016/S0958-9465(98)00034-1
  15. Chandra, S.B.L. (2002), Lightweight Aggregate Concrete, Noyes Publications, New York, U.S.A.
  16. Delhomme, F., Ambroise, J. and Limam, A. (2012), "Effects of high temperatures on mortar specimens containing Portland cement and GGBFS", Mater. Struct., 45(11), 1685-1692. https://doi.org/10.1617/s11527-012-9865-7
  17. DPT (2001), "Madencilik ozel ihtisas komisyonu raporu endustriyel hammaddeler alt komisyonu yapi malzemeler III calisma grubu raporu", Sekizinci Bes Yillik Kalkinma Plani, Ankara, 628.
  18. Georgali, B. and Tsakiridis, P.E. (2005), "Microstructure of firedamaged concrete: A case study", Cement Concrete Compos., 27(2), 255-259. https://doi.org/10.1016/j.cemconcomp.2004.02.022
  19. Karakoc, M.B. (2013), "Effect of cooling regimes on compressive strength of concrete with lightweight aggregate exposed to high temperature", Constr. Build. Mater., 41, 21-25. https://doi.org/10.1016/j.conbuildmat.2012.11.104
  20. Karatas, M., Turk, K., Acikgenc, M. and Ulucan, Z.C. (2010), "Effect of elazig region waste brick powder on strength and viscosity properties of self compacting mortar", Proceedings of the 9th International Congress on Advances in Civil Engineering, Trabzon, Turkey.
  21. Kew, H., Donchev, T. and Petkune, N. (2012), "Behaviour of concrete containing lightweight expanded clay aggregates under high temperatures", Concrete Solut., 491-496.
  22. Khoury, G.A. (1992), "Compressive strength of concrete at hightemperatures-a reassessment", Mag. Concrete Res., 44(161), 291-309. https://doi.org/10.1680/macr.1992.44.161.291
  23. Mouli, M. and Khelafi, H. (2008), "Performance characteristics of lightweight aggregate concrete containing natural pozzolan", Build. Environ., 43(1), 31-36. https://doi.org/10.1016/j.buildenv.2006.11.038
  24. Muthusamy, S. and Kolandasamy, P. (2015), "Lightweight selfcompacting concrete at high temperatures", Gradevinar, 67(4), 329-338.
  25. Okamura, H.O.M. (2003), "Self-compacting concrete", J. Adv. Concrete Technol., 1(1), 5-15. https://doi.org/10.3151/jact.1.5
  26. Ozawa, K., Maekawa, K., Kunishima, M. and Okamura, H. (1989), "High performance concrete based on the durability design of concrete structures", Proceedings of the EASEC-2, 445-450.
  27. Sakr, K. and El-Hakim, E. (2005), "Effect of high temperature or fire on heavy weight concrete properties", Cement Concrete Res., 35(3), 590-596. https://doi.org/10.1016/j.cemconres.2004.05.023
  28. Savva, A., Manita, P. and Sideris, K.K. (2005), "Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates", Cement Concrete Compos., 27(2), 239-248. https://doi.org/10.1016/j.cemconcomp.2004.02.013
  29. Tanyildizi, H., Coskun, A. and Somunkiran, I. (2008), "An experimental investigation of bond and compressive strength of concrete with mineral admixtures at high temperatures", Arab. J. Sci. Eng., 33(2B), 443-449.
  30. Topcu, I.B. (1997), "Semi lightweight concretes produced by volcanic slags", Cement Concrete Res., 27(1), 15-21. https://doi.org/10.1016/S0008-8846(96)00190-1
  31. Topcu, I.B. and Isikdag, B. (2008), "Effect of expanded perlite aggregate on the properties of lightweight concrete", J. Mater. Process. Technol., 204(1-3), 34-38. https://doi.org/10.1016/j.jmatprotec.2007.10.052
  32. TS EN 12390-7 (2009), Testing Hardened Concrete-Part 7: Density of Hardened Concrete, Turkish Standards Institute, Ankara, Turkey.
  33. TS EN 1363-1 (1999), Fire Resistance-Tests-Part 1: General Requirements, Turkish Standards Institute, Ankara, Turkey.
  34. TS EN 1363-2 (1999), Fire Resistance Tests-Part 2: Alternative and Additional Procedures, Turkish Standards Institute, Ankara, Turkey.
  35. TS EN 206-1 (2000), Concrete-Part 1: Specification, Performance, Production and Conformity, Turkish Standards Institute, Ankara, Turkey.
  36. Zhang, B.S. and Bicanic, N. (2002), "Residual fracture toughness of normal- and high-strength gravel concrete after heating to 600 degrees C", ACI Mater. J., 99(3), 217-226.

피인용 문헌

  1. Predicting strength of SCC using artificial neural network and multivariable regression analysis vol.20, pp.1, 2017, https://doi.org/10.12989/cac.2017.20.1.031
  2. Strength degeneracy of LWAC and flexural behavior of LWAC members after fire vol.20, pp.2, 2017, https://doi.org/10.12989/cac.2017.20.2.177
  3. Curing effect on mortar properties produced with styrene-butadiene rubber vol.21, pp.6, 2017, https://doi.org/10.12989/cac.2018.21.6.705
  4. High temperature effect on the mechanical behavior of steel fiber reinforced self‐compacting concrete containing ground pumice powder vol.20, pp.5, 2017, https://doi.org/10.1002/suco.201900067
  5. Effect of incorporation of raw vermiculite as partial sand replacement on the properties of self-compacting mortars at elevated temperature vol.221, pp.None, 2017, https://doi.org/10.1016/j.conbuildmat.2019.06.077
  6. The effects of cement type and expanded vermiculite powder on the thermo- mechanical characteristics and durability of lightweight mortars at high temperature and RSM modelling vol.15, pp.None, 2017, https://doi.org/10.1016/j.cscm.2021.e00709
  7. Industrial Wastes-Cum-Strength Enhancing Additives Incorporated Lightweight Aggregate Concrete (LWAC) for Energy Efficient Building: A Comprehensive Review vol.14, pp.1, 2017, https://doi.org/10.3390/su14010331