참고문헌
- H. F. Mark and N. G. Gaylord in "Encyclopedia of Polymer Science and Technology Plastics, Resins, Rubbers, Fibers", N. M. Bikales Ed., John Wiley & Sons, NY, 1967, Vol. 6, pp.275-332.
- I. Grigoriadou, K. Paraskevopoulos, K. Chrissafis, E. Pavlidou, T.-G. Stamkopolos, and D. Bikiaris, "Effect of Different Nanoparticles on HDPE UV Stability", Polym. Degrad. Stab., 2011, 96, 151-163. https://doi.org/10.1016/j.polymdegradstab.2010.10.001
- S. S. Liu, F. H. Meng, G. Q. Yu, and B. T. Huang, "Preparation of Polymer-Supported Zirconocene Catalysts and Olefin Polymerization", J. Appl. Polym. Sci., 1999, 71, 2253-2258. https://doi.org/10.1002/(SICI)1097-4628(19990328)71:13<2253::AID-APP16>3.0.CO;2-E
- B. Y. Lee and J. S. Oh, "Preparation of Anchored Metallocene Complexes on Dehydroxylated Silica and Their Use in the Polymerization of Ethylene", Macromolecules, 2000, 33, 3194-3195. https://doi.org/10.1021/ma9920386
- P. H. Herman, "Contributions to Physics of Cellulose Fibers", Elsevier, Amsterdam, 1946.
- E. W. Fischer and G. Hinrichsen, "On the Reliability on the Gradient Column Method for Measuring Densities of Polymer Single Crystals", Polymer, 1966, 7, 195-198. https://doi.org/10.1016/0032-3861(66)90014-0
- I. Noda, A. E. Dowery, and C. Marcott in "Physical Properties of Polymers Handbook", J. E. Mark, Ed., AIP Press, NY, 1996, p. 291.
- I. A. Hussein, "Influence of Composition Distribution and Branch Content on the Miscibility of m-LLDPE and HDPE Blends: Rheological Investigation", Macromolecules, 2003, 36, 2024-2031. https://doi.org/10.1021/ma0257245
- C. Vasile and M. Pascu "Practical Guide to Polyethylene", RAPRA Technol. Press, UK, 2005, p. 35.
- H. H. Cho and K. H. Kim, "Structure and Physical Properties of Polyethylene Fibers on the High-speed Spinning (1) -Effect of Melt Flow Rate in the High Density Polyethylene", J. Korean Fiber Soc., 1998, 35, 195-204.
- C. Z. Liao and S. C. Tjong, "Mechanical and Thermal Performance of High-density Polyethylene/Alumina Nanocomposites", J. Macromol. Sci. Phys., 2013, 52, 812-825. https://doi.org/10.1080/00222348.2012.733297
- Hitachi High-Tech, DSC Measurement of Polyethylene-The Correlation of Polyethylene Density and Melting, TA No. 26, 1986.
- C. H. Lei, R. J. Xu, Q. Cai, H. B. Mo, and C. B. Chen, "Influence of Melt-draw Ratio on the Structure and Properties of Polyactic Acid Cast Film", ACEM14 Advances in Civil, Enviromental and Materials Research, Busan, 2014.
- E. W. Lee, K. M. Kim, and I. S. Cho, "A Study on the Structure and Mechanical Properties of PP Filament at Different Spinning Speed and Draw Ratio", Korea Society of Industrial Application, 1999, 2, 27-33.
- H. Breuer, F. Haaf, and J. Stabenow, "Stress Whitening and Yielding Mechanism of Rubber-Modified PVC", J. Macromol. Sci. Phys., 1977, 14, 387-417. https://doi.org/10.1080/00222347708212908
- K. W. Beak, S. G. Lee, J. H. Lee, K. Y. Choi, and J. I. Weon, "Quantitative Evaluation of Scratch Behavior for Polymeric Materials", Polymer (Korea), 2009, 33, 273-283.
- B. W. Cherry and T. S. Hin, "Stress Whitening in Polyethylene", Polymer, 1981, 22, 1610-1612. https://doi.org/10.1016/0032-3861(81)90372-4