Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Study on the Limit Slenderness of a Single Outrigger System Building Satisfied the Limitation of the Maximum Lateral

풍하중에 대한 횡변위 제한 값을 만족하는 단일 아웃리거 시스템 건물의 한계 세장비에 대한 연구

  • 양재광 (부산대학교 건축공학과 대학원) ;
  • 이연종 (부산대학교 생산기술연구소) ;
  • 박성수 (부산대학교 건축공학과)
  • Received : 2016.10.24
  • Accepted : 2016.12.20
  • Published : 2017.01.30
⟨ Previous Next ⟩

Abstract

The demand on high-rise buildings increased, lateral drift control became a most important design variable, at the same time, various lateral drift control system were proposed and outrigger structural system was one of these typical systems. In recent years, the optimal location of outrigger has been proposed. The maximum of lateral drift vary depending on the slenderness ratio of structure, even the structures were set as similar heights and outriggers were also set at the optimal locations. Commonly, There's no knowing that the limitation of the maximum lateral drift either meets the requirements or not limitation of the maximum lateral drift as just at the optimal location of outriggers simply. This paper transformed the equation on the optimal location of singular outrigger proposed by Taranath. Equation of limitation of slenderness ratio on structures with singular outrigger on the optimal location were proposed singular outrigger on the optimal location, limitation of slenderness ratio was also proposed.

Keywords

References

  1. Jung, D. (1999). Optimum Outrigger Locations for Outrigger Braced Structures with Stiffness Varying Linearly along the Height, Journal of the Architectural Institute of Korea Structure & Construction, 15(2), 55-62.
  2. B, S, Taranath. (1975). Optimum Belt Truss Location for High-rise Structures, The Structural Engineer, 53(8), 345-347.
  3. J, W, McNabb., & B, B, Muvdi. (1975). Drift reduction fators for belt high-rise Structures, Engineering Journal 3rd Quarter, 88-91.
  4. B, S, Taranath. (1997). Steel, Concrete & Composite Design of Tall Building, McGraw-Hill, 459-466.
  5. KBC2016. (2016). Architectural Institute of Korea.
  6. MIDAS 2017.
  7. Han, B. Skyscraper Structure System & Case Study, Daewoo Engineering, 25(1).
  8. Jang, D., & Jand, S. (2007). Structural Mechanics, kimoondang.
  9. Park, S. (2000). Analysis of offset outrigger system for tall steel buildings, Seoul National University.
  10. Jung, E,, & Park, S. (2009). Evaluating the Central Core of High-rise Shear Wall Structure for Lateral Displacement Control, Journal of the regional association of architectural institute of korea, 11(3), 193-200.