References
- Abellan, A., Oppikofer, T., Jaboyedoff, M., Rosser, N. J., Lim, M., & Lato, M. J., 2014, Terrestrial laser scanning of rock slope instabilities, Earth Surface Processes and Landforms, Vol. 39, No. 1, 80-97. https://doi.org/10.1002/esp.3493
- Bae, K. Y. and Lee, C. I., 2002, Development of a 3D roughness measurement system of rock joint using laser type displavement meter, Tunnel and Underground Space, Vol. 12, No. 4, 268-276.
- Barton, N. and Choubey, V., 1977, The shear strength of rock joints in theory and practice, Rock Mechanics, Vol. 10, 1-54. https://doi.org/10.1007/BF01261801
- Barton, N. R., 1976, The shear strength of rock and rock joints, International Journal of Rock Mechanics Mining Sciences & Geomechanics Abstracts, Vol. 13, No. 9, 255-279. https://doi.org/10.1016/0148-9062(76)90003-6
- Belem, T., F. Homand-Etienne and M. Souley, 2000, Quantitative parameters for rock joint surface roughness, Rock Mechanics and Rock Engineering, Vol. 33, No. 4, 217-242. https://doi.org/10.1007/s006030070001
- Cai, M., Kaiser, P. K., Uno, H., Tasaka, Y., & Minami, M., 2004, Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system, International Journal of Rock Mechanics and Mining Sciences, Vol. 41, 3-19. https://doi.org/10.1016/S1365-1609(03)00025-X
- Cai, M., Kaiser, P. K., Tasaka, Y., Minami, M., 2007, Determination of residual strength parameters of jointed rock masses using GSI system, International Journal of Rock Mechanics and Mining Sciences, Vol. 44, 247-265. https://doi.org/10.1016/j.ijrmms.2006.07.005
- El Soudani, S. M., 1978, Profilometric analysis of fractures, Metallography, Vol. 11, 247-336. https://doi.org/10.1016/0026-0800(78)90045-9
- Feng, Q., Fardin, N., Jing, L., & Stephansson, O., 2003, A New Method for In-situ Non-contact Roughness Measurement of Large Rock Fracture Surfaces, Rock Mechanics and Rock Engineering, Vol. 36, No. 1, 3-25. https://doi.org/10.1007/s00603-002-0033-1
- Hoek, E., Kaiser, P. K., Bawden, W. F., 1995, Support of underground excavations in hard rock, Rotterdam, Balkema, 215p.
- Kemeny, J., Turner, K., & Norton, B., 2006, LIDAR for rock mass characterization: hardware, software, accuracy and best-practices, Laser and Photogrammetric Methods for Rock Face Characterization, 49-62.
- Kim, C. and Kemeny, J., 2009, Measurement of Joint Roughness in Large-Scale Rock Fracture Using LIDAR, Tunnel and Underground Space, Vol. 19, No. 1, 52-63.
- Kwon, J. C., 2005, Analysis on shear behavior of rock joint under different shear test methods, Master's Thesis, Seoul National University.
- Lee, S. and Jeon, S., 2016, A Study on the Extraction of Slope Surface Orientation using LIDAR with respect to Triangulation Method and Sampling on the Point Cloud, Tunnel and Underground Space, Vol. 26, No. 1, 46-58. https://doi.org/10.7474/TUS.2016.26.1.046
- Myers, N., 1962, Characterization of surface roughness, Wear, Vol. 5, No. 3, 182-189. https://doi.org/10.1016/0043-1648(62)90002-9
- Oh, S., 2011, Extraction of Rock Discontinuity Orientation by Laser Scanning Technique, Masters thesis, Seoul National University, 73p.
- Park, B. Y. and Kwon, S., 2000, Current Status of the Characterization of the Rock Joint Surface, Tunnel and Underground Space, Vol. 10, No. 4, 566-579.
- Park, J. W., Lee, Y. K., Song, J. J. and Choi, B. H., 2012, A New Coefficient for Three Dimensional Quantification of Rock Joint Roughness, Vol. 22, No. 2, 106-119. https://doi.org/10.7474/TUS.2012.22.2.106
- Son, B. K., 2006, Shear behavior of rock joint under constant normal stiffness condition, Ph.D. Thesis, Seoul National University.
- Tatone, B. and Grasselli, G., 2009, A method to evaluate the three-dimensional roughness of fracture surfaces in brittle geomaterials, Review of Scientific Instruments, Vol. 80, No. 12, 1-10.
- Tatone, B. and Grasselli, G., 2013, An Investigation of Discontinuity Roughness Scale Dependency Using High-Resolution Surface Measurements, Rock Mechanics and Rock Engineering, Vol. 46, 657-681 https://doi.org/10.1007/s00603-012-0294-2
- Tse, R. and Cruden, D. M., 1979, Estimating joint roughness coefficients, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 16, 303-307. https://doi.org/10.1016/0148-9062(79)90241-9