References
- Castelletto, N., Gambolati, G. and Teatini, P., 2013, Geological CO2 sequestration in multi-compartment reservoirs: Geomechanical challenges, J. Geophy. Res.: Solid Earth, 118, 2417-2428. https://doi.org/10.1002/jgrb.50180
- Chen, W.F. and Saleeb, A.F., 1982, Constitutive equations for engineering materials Vol.1: Elasticity and Modeling, John Wiley & Sons.
- Clausen, J. and Damkilde, L., 2006, Slope safety factor calculations with non-linear yield criterion using finite elements, In: Num. Meth. Geotech. Eng. - Schweiger (Ed.), 491-496, Taylor & Francis Group, London.
- Dawson, E.M., Roth, W.H. and Drescher, A., 1999, Slope stability analysis by strength reduction, Geotechnique, 49, 835-840. https://doi.org/10.1680/geot.1999.49.6.835
- Duncan Fama, M.E., Trueman, R. and Craig, M.S., 1995, Two- and Three-dimensional elasto-plastic analysis for coal pillar design and its application to highwall mining, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 32(3), 215-225. https://doi.org/10.1016/0148-9062(94)00045-5
- Duncan, J.M., 1996, State of the art: Limit equilibrium and finite-element analysis of slopes, J. Geotech. Eng. ASCE, 122.7, 577-596. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:7(577)
- Esterhuizen, G.S., Dolinar, D.R. and Ellenberger, J.L., 2011, Pillar strength in underground stone mines in the United States, Int. J. Rock Mech. Min. Sci., 48, 42-50. https://doi.org/10.1016/j.ijrmms.2010.06.003
- Hammah, R.E, Curran J.H., Yacoub, T. and Corkum, B., 2004, Stability analysis of rock slopes using the finite element method, In: Proc. ISRM Regional Sympo. EUROCK 2004 & 53rd Geomech. Colloq., Salzburg, Autria.
- Hoek., E. and Brown E.T., 1980, Underground excavations in rock, The Institution of Mining and Metallurgy, London.
- Hoek, E., 1983, Strength of jointed rock masses, Geotechnique, 33(3), 187-223. https://doi.org/10.1680/geot.1983.33.3.187
- Huang, S.L. and Yamasaki, K., 1993, Slope failure analysis using local minimum factor-of-safety approach, J. Geotech. Eng., 119(12), 1974-1987. https://doi.org/10.1061/(ASCE)0733-9410(1993)119:12(1974)
- Lee, Y.K., 2011, Study on a 3-dimensional rock failure criterion approximating to Mohr-Coulomb surface, Tunnel & Underground Space, 21(2), 93-102.
- Lee, Y.K., Song, W.K., Park, C. and Choi, B.H., 2011, Stability analysis of concrete plugs using 3-D failure criterion, Tunnel & Underground Space, 21(6), 526-535.
- Lee, Y.K., 2014, Derivation of Mohr envelope of Hoek-Brown failure criterion using non-dimensional stress transformation, Tunnel & Underground Space, 24(1), 81-88. https://doi.org/10.7474/TUS.2014.24.1.081
- Lee, Y.K. and Pietruszczak, S., 2016, Analytical Representation of Mohr Failure Envelope Approximating the Generalized Hoek-Brown Failure Criterion, Int. J. Rock Mech. Min. Sci. (submitted).
- Londe, P., 1988, Discussion on the determination of the shear stress failure in rock masses, ASCE J. Geotech. Eng. Div., 14(3), 374-376.
- Nayak, G. C. and Zienkiewicz, O. C., 1972, Convenient forms of stress invariants for plasticity. J. Struct. Div. ASCE, 98, 949-953.
- Pietruszczak, S., 2010, Fundamentals of plasticity in geomechanics, CRC Press.
- Okubo, S., Fukui, K. and Nishimatsu, Y., 1997, Local safety factor applicable to wild range of failure criteria, Rock Mech. Rock Eng., 30(4), 223-227. https://doi.org/10.1007/BF01045718
- Roostaei, R., 2014, Quantifying the error associated with the use of triaxial rock strength criterion in rock stability assessment around underground openings, Master's Thesis, University of Toronto.
- Ucar, R., 1986, Determination of shear failure envelope in rock masses, J. Geotech. Eng. Div. ASCE, 112(3), 303-315. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:3(303)
- Wyllie, D.C. and Mah, C.W., 2004, Rock Slope Engineering (4th Ed.), Spon Press, New York.
- Zheng, H., Tham, L.G. and Liu, D., 2006, On two definitions of the factor of safety commonly used in the finite element slope stability, Computers and Geotechnics, 33, 188-195. https://doi.org/10.1016/j.compgeo.2006.03.007