참고문헌
- D.S. Correia, C.V. Goncalves, S.S. da Cunha Jr., V.A. Ferraresi, Comparison between genetic algorithms and response surface methodology in GMAW welding optimization, J. Mater. Process Tech. 160 (2005), 70-76 https://doi.org/10.1016/j.jmatprotec.2004.04.243
- P.K. Palani, N. Murugan, Optimization of weld bead geometry for stainless steel claddings deposited by FCAW, J. Mater. Process Tech. 190 (2007), 291-299 https://doi.org/10.1016/j.jmatprotec.2007.02.035
- C. Doumanidis, Y.M. Kwak, Multivariable adaptive control of the bead profile geometry in gas metal arc welding with thermal scanning, Int. J. Pres. Ves. Pip. 79 (2002), 251-262 https://doi.org/10.1016/S0308-0161(02)00024-8
- T.C. Nguyen, D.C. Weckman, D.A. Johnson, H.W. Kerr, High speed fusion weld bead defects, Sci. Technol. Weld. Joi. 11 (6) (2006), 618-633 https://doi.org/10.1179/174329306X128464
- T.C. Nguyen, D.C. Weckman, D.A. Johnson, The discontinuous weld bead defect in high-speed gas metal arc welds, Weld. J. 86 (2007), 360-3725
- E. Karadeniz, U. Ozsarac, C. Yildiz, The effect of process parameters on penetration in gas metal arc welding processes, Mater. Des. 28 (2007), 649-656 https://doi.org/10.1016/j.matdes.2005.07.014
- R. Choteborsky, M. Navratilova, P. Hrabe, Effects of MIG process parameters on the geometry and dilution of the bead in the automatic surfacing, Res. Agr. Eng. 57 (2) (2011), 56-62 https://doi.org/10.17221/19/2010-RAE
- P. Sreeraj, T. Kannan, S. Maji, Optimization of weld bead geometry for stainless steel cladding deposited by GMAW, Am. J. Eng. Res. 02 (05) (2013), 178-187
- P. Sreeraj, T. Kannan, S. Maji, Prediction and optimization of weld bead geometry in gas metal arc welding process using RSM and fmincon, J. Mech. Eng. Res. 5 (8) (2013), 154-165 https://doi.org/10.5897/JMER2013.0271
- P. Sreeraj, T. Kannan, S. Maji, Prediction and optimization of stainless steel cladding deposited by GMAW process using response surface methodology, ANN and PSO, Int. J. Eng. Sci. 3 (5) (2013), 30-41
- P. Sreeraj, T. Kannan, S. Maji, Optimization of GMAW process parameters using particle swarm optimization, ISRN Metall. 2013, 1-10
- I.S. Kim, K.J. Son, Y.S. Yang, P.K.D.V. Yaragada, Sensitivity analysis for process parameters in GMA welding processes using a factorial design method, Int. J. Mach. Tool. Manu. 43 (2003), 763-769 https://doi.org/10.1016/S0890-6955(03)00054-3
- I. Boiko, D. Avisans, Study of shielding gases for MAG welding, Mater. Phys. Mech. 16 (2013), 126-134
- R.H. Myers, D.C. Montgomery, C.M. Anderson-Cook, Response Surface Methodology - Process and product optimization using designed experiments, John Wiley & Sons, Hoboken, New Jersey (2009), 705
- M.A. Bezerra, R.E. Santelli, E.P. Oliveira, L.S. Villar, L.A. Escaleira, Response surface methodology (RSM) as a tool for optimization in analytical chemistry, Talanta 76 (2008), 965-977 https://doi.org/10.1016/j.talanta.2008.05.019
- O. Popovic, R. Prokic-Cvetkovic, M. Burzic, Z. Milutinovic, The effect of heat input on the weld metal toughness of surface welded joint, 14th Int. Res./Exp. Conf., TMT 2010 (11-18 September, 2010), 61-64
- C.L. Jennery, A. O'Brien, Welding Handbook - Welding Science and Technology, American Welding Society, Miami, Florida (2001), 985 (54)
- A.I. Khuri, S. Mukhopadhyay, Response surface methodology, WIREs Comp. Stat. 2 (2012), 128-149