DOI QR코드

DOI QR Code

Damage detection of shear buildings through structural mass-stiffness distribution

  • Liang, Yabin (Faculty of Infrastructure Engineering, Dalian University of Technology) ;
  • Li, Dongsheng (Faculty of Infrastructure Engineering, Dalian University of Technology) ;
  • Song, Gangbing (Faculty of Infrastructure Engineering, Dalian University of Technology) ;
  • Zhan, Chao (Faculty of Infrastructure Engineering, Dalian University of Technology)
  • 투고 : 2015.12.16
  • 심사 : 2016.09.16
  • 발행 : 2017.01.25

초록

For structural damage detection of shear buildings, this paper proposes a new concept using structural element mass-stiffness vector (SEMV) based on special mass and stiffness distribution characteristics. A corresponding damage identification method is developed combining the SEMV with the cross-model cross-mode (CMCM) model updating algorithm. For a shear building, a model is assumed at the beginning based on the building's distribution characteristics. The model is updated into two models corresponding to the healthy and damaged conditions, respectively, using the CMCM method according to the modal parameters of actual structure identified from the measured acceleration signals. Subsequently, the structural SEMV for each condition can be calculated from the updated model using the corresponding stiffness and mass correction factors, and then is utilized to form a new feature vector in which each element is calculated by dividing one element of SEMV in health condition by the corresponding element of SEMV in damage condition. Thus this vector can be viewed as a damage detection feature for its ability to identify the mass or stiffness variation between the healthy and damaged conditions. Finally, a numerical simulation and the laboratory experimental data from a test-bed structure at the Los Alamos National Laboratory were analyzed to verify the effectiveness and reliability of the proposed method. Both simulated and experimental results show that the proposed approach is able to detect the presence of structural mass and stiffness variation and to quantify the level of such changes.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Carden, E.P., and Fanning, P. (2004), "Vibration based condition monitoring: a review", Struct. Health Monit., 3(4), 355-377. https://doi.org/10.1177/1475921704047500
  2. Doebling, S.W., Farrar, C.R.. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib. Digest, 30(2), 91-105. https://doi.org/10.1177/058310249803000201
  3. Fan, W. and Qiao, P. (2011), "Vibration-based damage identification methods: a review and comparative study", Struct. Health Monit., 10(1), 83-111. https://doi.org/10.1177/1475921710365419
  4. Farrar, C.R., and Worden, K. (2012), Structural health monitoring: A machine learning perspective, John Wiley & Sons, Chichester, West Sussex, U.K.
  5. Figueiredo, E., Park, G., Figueiras, J., Farrar, C. and Worden, K. (2009), "Structural health monitoring algorithm comparisons using standard data sets", Research Report No. LA-14393; Los Alamos National Laboratory (LANL), Los Alamos, NM (United States).
  6. Hernandez-Garcia, M.R., Masri, S.F., Ghanem, R., Figueiredo, E. and Farrar, C.R. (2010), "An experimental investigation of change detection in uncertain chain-like systems", J. Sound Vib., 329(12), 2395-2409. https://doi.org/10.1016/j.jsv.2009.12.024
  7. Hu, S.L.J., Li, H. and Wang, S. (2007), "Cross-model cross-mode method for model updating", Mech. Syst. Signal Pr., 21(4), 1690-1703. https://doi.org/10.1016/j.ymssp.2006.07.012
  8. Juang, J.N. (1994), Applied system identification, Prentice Hall, Englewood Cliffs, New Jersey, USA
  9. Li, H.N., Li, D.S. and Song, G.B. (2004), "Recent applications of fiber optic sensors to health monitoring in civil engineering", Eng. Struct., 26(11), 1647-1657. https://doi.org/10.1016/j.engstruct.2004.05.018
  10. Masri, S., Bekey, G., Sassi, H. and Caughey, T. (1982), "Nonparametric identification of a class of nonlinear multidegree dynamic systems", Earthq. Eng. Struct. D., 10(1), 1-30. https://doi.org/10.1002/eqe.4290100102
  11. Pandey, A., Biswas, M. and Samman, M. (1991), "Damage detection from changes in curvature mode shapes", J. Sound Vib., 145(2), 321-332. https://doi.org/10.1016/0022-460X(91)90595-B
  12. Peeters, B., Lowet, G., Van der Auweraer, H. and Leuridan, J. (2004), "A new procedure for modal parameter estimation", J. Sound Vib., 38(1), 24-29.
  13. Peeters, B., Van der Auweraer, H., Guillaume, P. and Leuridan, J. (2004), "The PolyMAX frequency-domain method: a new standard for modal parameter estimation", J. Shock Vib., 11(3-4), 395-409. https://doi.org/10.1155/2004/523692
  14. Roy, K. and Ray-Chaudhuri, S. (2013), "Fundamental mode shape and its derivatives in structural damage localization", J. Sound Vib., 332(21), 5584-5593. https://doi.org/10.1016/j.jsv.2013.05.003
  15. Sampaio, R., Maia, N. and Silva, J. (1999), "Damage detection using the frequency-response-function curvature method", J. Sound Vib., 226(5), 1029-1042. https://doi.org/10.1006/jsvi.1999.2340
  16. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W., Nadler, B.R. and Czarnecki, J.J. (2004), A review of structural health monitoring literature: 1996-2001: Los Alamos National Laboratory Los Alamos, NM.
  17. Tomaszewska, A. (2010), "Influence of statistical errors on damage detection based on structural flexibility and mode shape curvature", Comput. Struct., 88(3), 154-164. https://doi.org/10.1016/j.compstruc.2009.08.017
  18. Wang, J. (2009), "Study on damage detection and model updating for offshore platform structures", Ph.D, Dissertation, Ocean University of China, Qingdao. (in Chinese)
  19. Worden, K. and Tomlinson, G. (1989), "Application of the restoring force surface method to nonlinear elements", Processings of the 7th International Modal Analysis Conference, Las Vegas, NV.
  20. Zhang, C. and Song, G.Q. (2012), "Bridge damage identification by finite element model updating with Tikhonov regularization and wavelet denoising", J. Vib. Eng., 25(1), 98-102.
  21. Zhang, L., Jiang, F., Wang, Y. and Zhang, X. (2008), "Measurement and analysis of vibration of small agriculturalmachinery based on LMS Test. Lab", Transactions of the Chinese Society of Agricultural Engineering, 24(5),100-104.
  22. Zhu, H., Li, L. and He, X.Q. (2011), "Damage detection method for shear buildings using the changes in the first mode shape slopes", Comput. Struct., 89(9), 733-743. https://doi.org/10.1016/j.compstruc.2011.02.014

피인용 문헌

  1. Study on Hysteresis Model of Welding Material in Unstiffened Welded Joints of Steel Tubular Truss Structure vol.8, pp.9, 2018, https://doi.org/10.3390/app8091701
  2. Output-Only Parameters Identification of Earthquake-Excited Building Structures with Least Squares and Input Modification Process vol.9, pp.4, 2019, https://doi.org/10.3390/app9040696
  3. Damage detection of shear buildings using frequency-change-ratio and model updating algorithm vol.23, pp.2, 2019, https://doi.org/10.12989/sss.2019.23.2.107