DOI QR코드

DOI QR Code

Nonlinear response of r.c. framed buildings retrofitted by different base-isolation systems under horizontal and vertical components of near-fault earthquakes

  • Mazza, Fabio (Dipartimento di Ingegneria Civile, Universita della Calabria) ;
  • Mazza, Mirko (Dipartimento di Ingegneria Civile, Universita della Calabria) ;
  • Vulcano, Alfonso (Dipartimento di Ingegneria Civile, Universita della Calabria)
  • 투고 : 2016.07.16
  • 심사 : 2016.12.12
  • 발행 : 2017.01.25

초록

Near-fault ground motions are characterized by high values of the ratio between the peak of vertical and horizontal ground accelerations, which can significantly affect the nonlinear response of a base-isolated structure. To check the effectiveness of different base-isolation systems for retrofitting a r.c. framed structure located in a near-fault area, a numerical investigation is carried out analyzing the nonlinear dynamic response of the fixed-base and isolated structures. For this purpose, a six-storey r.c. framed building is supposed to be retrofitted by insertion of an isolation system at the base for attaining performance levels imposed by current Italian code in a high-risk seismic zone. In particular, elastomeric (e.g., high-damping-laminated-rubber bearings, HDLRBs) and friction (e.g., steel-PTFE sliding bearings, SBs, or friction pendulum bearings, FPBs) isolators are considered, with reference to three cases of base isolation: HDLRBs acting alone (i.e., EBI structures); in-parallel combination of HDLRBs and SBs (i.e., EFBI structures); FPBs acting alone (i.e., FPBI structures). Different values of the stiffness ratio, defined as the ratio between the vertical and horizontal stiffnesses of the HDLRBs, sliding ratio, defined as the global sliding force divided by the maximum sliding force of the SBs, and in-plan distribution of friction coefficient for the FPs are investigated. The EBI, EFBI and FPBI base-isolation systems are designed assuming the same values of the fundamental vibration period and equivalent viscous damping ratio. The nonlinear dynamic analysis is carried out with reference to near-fault earthquakes, selected and scaled on the design hypotheses adopted for the test structures.

키워드

과제정보

연구 과제 주관 기관 : Re.L.U.I.S. (Italian network of university laboratories of earthquake engineering)

참고문헌

  1. Baratta, A., Corbi, I., Corbi, O., Barros, R.C. and Bairrao, R. (2012), "Shaking table experimental researches aimed at the protection of structures subjected to dynamic loading", Open Constr. Build. Technol. J., 6, 355-360. https://doi.org/10.2174/1874836801206010355
  2. Calvi, G.M. (2013), "Choices and criteria for seismic strengthening", J. Earthq. Eng., 17(6), 769-802. https://doi.org/10.1080/13632469.2013.781556
  3. Chalioris, C.E., Favvata, M.J. and Karayannis, C.G. (2008), "Reinforced concrete beam-column joints with crossed inclined bars under cyclic deformations", Earthq. Eng. Struct. Dyn., 37(6), 881-897. https://doi.org/10.1002/eqe.793
  4. Constantinou, M.C., Mokha, A. and Reinhorn, A.M. (1990), "Teflon bearings in base isolation. II: modeling", J. Struct. Eng., 116(2), 455-474. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:2(455)
  5. De Luca, F. and Verderame, G.M. (2013), "A practice-oriented approach for the assessment of brittle failures in existing reinforced concrete elements", Eng. Struct., 48, 373-388. https://doi.org/10.1016/j.engstruct.2012.09.038
  6. DM96, Italian Ministry of Public Works (1996), "Norme tecniche per le costruzioni in zone sismiche e relative istruzioni", D.M. 16-01-1996 and C.M. 10-04-1997, n. 65/AA.GG.
  7. Dolce, M., Cardone, D. and Croatto, F. (2005), "Frictional behaviour of steel-PTFE interfaces for seismic isolation", Bull. Earthq. Eng., 3(1), 75-99. https://doi.org/10.1007/s10518-005-0187-9
  8. Faga, E., Ceresa, P., Nascimbene, R., Moratti, M. and Pavese, A. (2016), "Modelling curved surface sliding bearings with bilinear constitutive law: effects on the response of seismically isolated buildings", Mater. Struct., 49(6), 2179-2196. https://doi.org/10.1617/s11527-015-0642-2
  9. Favvata, M.J., Izzuddin, B.A. and Karayannis, C.G. (2008), "Modelling exterior beam-column joints for seismic analysis of RC frame structures", Earthq. Eng. Struct. Dyn., 37(13), 1527-1548. https://doi.org/10.1002/eqe.826
  10. Favvata, M.J. and Karayannis, C.G. (2014), "Influence of pinching effect of exterior joints on the seismic behavior of RC frames", Earthq. Struct., 6(1), 89-110. https://doi.org/10.12989/eas.2014.6.1.089
  11. FIP Industriale (2013), Catalogue S04. Curved surface sliders, Padova, Italy, http://www.fipindustriale.it.
  12. Foti, D. (2014), "Response of frames seismically protected with passive systems in near-field areas", Int. J. Struct. Eng., 5(4), 326-345. https://doi.org/10.1504/IJSTRUCTE.2014.065916
  13. Ghobarah, A. (2004), "On drift limits associated with different damage levels", Proceedings of the International Workshop Performance-Based Seismic Design: Concepts and Implementation, Bled, Slovenia.
  14. Karayannis, C.G., Chalioris, C.E. and Sirkelis, G.M. (2008), "Local retrofit of exterior RC beam-column joints using thin RC jackets-An experimental study", Earthq. Eng. Struct. Dyn., 37(5), 727-746. https://doi.org/10.1002/eqe.783
  15. Karayannis, C.G., Favvata, M.J. and Kakaletsis, D.J. (2011), "Seismic behavior of infilled and pilotis RC frame structures with beam-column joint degradation effect", Eng. Struct., 33(10), 2821-2831. https://doi.org/10.1016/j.engstruct.2011.06.006
  16. Kasalanati, A. and Constantinou, M.C. (2005), "Testing and modeling of prestressed isolators", J. Struct. Eng., 131(6), 857-866. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:6(857)
  17. Lima, C., Martinelli, E. and Faella, C. (2012), "Capacity models for shear strength of exterior joints in RC frames: state-of-the-art and synoptic examination", Bull. Earthq. Eng., 10(3), 967-983. https://doi.org/10.1007/s10518-012-9340-4
  18. Lomiento, G., Bonessio, N. and Benzoni, G. (2013), "Friction model for sliding bearings under seismic excitation", J. Earthq. Eng., 17(8), 1162-1191. https://doi.org/10.1080/13632469.2013.814611
  19. Mazza, F. (2015), "Comparative study of the seismic response of RC framed buildings retrofitted using modern techniques", Earthq. Struct., 9(1), 29-48. https://doi.org/10.12989/eas.2015.9.1.029
  20. Mazza, F. (2015), "Nonlinear incremental analysis of fire-damaged r.c. base-isolated structures subjected to near-fault ground motions", Soil Dyn. Earthq. Eng., 77, 192-202. https://doi.org/10.1016/j.soildyn.2015.05.006
  21. Mazza, F. (2016), "Effects of near-fault vertical earthquakes on the nonlinear incremental response of r.c. base-isolated structures exposed to fire", Bull. Earthq. Eng., 14(2), 857-866.
  22. Mazza, F. and Mazza, M. (2016), "Nonlinear seismic analysis of irregular r.c. framed buildings base-isolated with friction pendulum system under near-fault excitations", Soil Dyn. Earthq. Eng., 90(1), 299-312. https://doi.org/10.1016/j.soildyn.2016.08.028
  23. Mazza, F. and Pucci, D. (2016), "Static vulnerability of an existing r.c. structure and seismic retrofitting by CFRP and base-isolation: A case study", Soil Dyn. Earthq. Eng., 84, 1-12. https://doi.org/10.1016/j.soildyn.2016.01.010
  24. Mazza, F. and Vulcano, A. (2010), "Nonlinear dynamic response of r.c. framed structures subjected to near-fault ground motions", Bull. Earthq. Eng., 8(6), 1331-1350. https://doi.org/10.1007/s10518-010-9180-z
  25. Mazza, F. and Vulcano, A. (2012), "Effects of near-fault ground motions on the nonlinear dynamic response of base-isolated r.c. framed buildings", Earthq. Eng. Struct. Dyn., 41(2), 211-232. https://doi.org/10.1002/eqe.1126
  26. Mazza, F., Mazza, M. and Vulcano, A. (2012), "Nonlinear dynamic response of rc buildings with different base-isolation systems subjected to horizontal and vertical components of near-fault ground motions", Open Constr. Build. Technol. J., 6, 346-354. https://doi.org/10.2174/1874836801206010346
  27. Mollaioli, F., Lucchini, A., Cheng, Y. and Monti, G. (2013), "Intensity measures for the seismic response prediction of baseisolated buildings", Bull. Earthq. Eng., 11(5), 1841-1866. https://doi.org/10.1007/s10518-013-9431-x
  28. Naeim, F. and Kelly, J.M. (1999) Design of seismic isolated structures: from theory to practice, Wiley & S. Ltd., NY.
  29. NTC08 (2008), Technical Regulations for the Constructions, Italian Ministry of the Infrastructures. (in Italian)
  30. PEER (2008), "Pacific Earthquake Engineering Research center. Next Generation Attenuation (NGA) database", http://peer.berkeley.edu/peer_ground_motion_database.
  31. Petti, L., Polichetti, F. and Palazzo, B. (2013), "Analysis of seismic performance of fps base isolated structures subjected to near fault events", Int. J. Eng. Technol., 5(6), 5233-5240.
  32. Ryan, K.L., Kelly, J.K. and Chopra, A.K. (2004), "Experimental observation of axial load effects in isolation bearings", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, paper No. 1707.
  33. Sorace, S. and Terenzi, G. (2014), "Motion control-based seismic retrofit solutions of R/C school building designed with earlier Technical Standards", Bull. Earthq. Eng., 12(6), 2723-2744. https://doi.org/10.1007/s10518-014-9616-y
  34. Tsonos, A.G. (2007), "Cyclic load behavior of RC beam-column subassemblages of modern structures", ACI Struct. J., 104(4), 468-478.
  35. Tsonos A.-D.G. (2010), "Performance enhancement of R/C building columns and beam-column joints through shotcrete jacketing", Eng. Struct., 32(3), 726-740. https://doi.org/10.1016/j.engstruct.2009.12.001
  36. Tsonos, A.-D.G. (2014), "A new method for earthquake strengthening of old R/C structures without the use of conventional reinforcement", Struct. Eng. Mech., 52(2), 391-403. https://doi.org/10.12989/sem.2014.52.2.391

피인용 문헌

  1. Structural and non-structural intensity measures for the assessment of base-isolated structures subjected to pulse-like near-fault earthquakes vol.96, 2017, https://doi.org/10.1016/j.soildyn.2017.02.013
  2. Developing collapse fragility curves for base-isolated buildings pp.00988847, 2018, https://doi.org/10.1002/eqe.3126
  3. Parametric Study of Effects of Vertical Ground Motions on Base Isolated Structures pp.1559-808X, 2018, https://doi.org/10.1080/13632469.2018.1520758
  4. Experiment of Ultimate Shear Failure and Friction Sliding Performance of Rubber Bearings of Bridges vol.11, pp.None, 2017, https://doi.org/10.2174/1874149501711010586
  5. Performance of RC moment frames with fixed and hinged supports under near-fault ground motions vol.13, pp.1, 2017, https://doi.org/10.12989/eas.2017.13.1.089
  6. Seismic performance of R/C structures under vertical ground motion vol.20, pp.4, 2017, https://doi.org/10.12989/cac.2017.20.4.369
  7. Optimum parameters of a five-story building supported by lead-rubber bearings under near-fault ground motions vol.39, pp.1, 2017, https://doi.org/10.1177/1461348419845829
  8. An efficient approach for LCC-based optimum design of lead-rubber base isolation system via FFD and analysis of variance (ANOVA) vol.18, pp.4, 2017, https://doi.org/10.1007/s10518-019-00754-6
  9. Shock absorption of concrete liquid storage tank with different kinds of isolation measures vol.18, pp.4, 2017, https://doi.org/10.12989/eas.2020.18.4.467
  10. On the effect of seismic base isolation on seismic design requirements of RC structures vol.28, pp.None, 2020, https://doi.org/10.1016/j.istruc.2020.09.063
  11. Quantitative Identification of Pulse-Like Ground Motions Based on Hilbert-Huang Transform vol.2021, pp.None, 2017, https://doi.org/10.1155/2021/9915362
  12. Seismic Energy Response of SDOF Systems Subjected to Long-Period Ground Motion Records vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/6655400
  13. Strong Far-Field Vertical Excitation and Building Damage: A Systematic Review and Future Avenues vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/8819064
  14. Seismic poundings of multi-story buildings isolated by TFPB against moat walls vol.20, pp.3, 2021, https://doi.org/10.12989/eas.2021.20.3.295
  15. Lateral Impact Resilient double concave Friction Pendulum (LIR-DCFP) bearing: Formulation, parametric study of the slider and three-dimensional numerical example vol.233, pp.None, 2017, https://doi.org/10.1016/j.engstruct.2021.111892
  16. Cyclic behavior of an adaptive seismic isolation system combining a double friction pendulum bearing and shape memory alloy cables vol.30, pp.7, 2021, https://doi.org/10.1088/1361-665x/abfb80
  17. Evaluation of nonlinear static and dynamic analysis of steel braced frame buildings subjected to near-field earthquakes using FBD and DBD vol.34, pp.None, 2017, https://doi.org/10.1016/j.istruc.2021.08.082
  18. A new energy balance-based method for evaluating seismic performance of isolated bridges under near-fault ground motions vol.34, pp.None, 2017, https://doi.org/10.1016/j.istruc.2021.09.091