DOI QR코드

DOI QR Code

Cyclic tests and numerical study of composite steel plate deep beam

  • Hu, Yi (School of Civil Engineering, Chang'an University) ;
  • Jiang, Liqiang (School of Civil Engineering, Chang'an University) ;
  • Zheng, Hong (School of Civil Engineering, Chang'an University)
  • 투고 : 2016.06.28
  • 심사 : 2016.11.09
  • 발행 : 2017.01.25

초록

Composite steel plate deep beam (CDB) is proposed as a lateral resisting member, which is constructed by steel plate and reinforced concrete (RC) panel, and it is connected with building frame through high-strength bolts. To investigate the seismic performance of the CDB, tests of two 1/3 scaled specimens with different length-to-height ratio were carried out under cyclic loads. The failure modes, load-carrying capacity, hysteretic behavior, ductility and energy dissipation were obtained and analyzed. In addition, the nonlinear finite element (FE) models of the specimens were established and verified by the test results. Besides, parametric analyses were performed to study the effect of length-to-height ratio, height-to-thickness ratio, material type and arrangement of RC panel. The experimental and numerical results showed that: the CDBs lost their load-carrying capacity because of the large out-of plane deformation and yield of the tension field formed on the steel plate. By increasing the length-to-height ratio of steel plate, the load-carrying capacity, elastic stiffness, ductility and energy dissipation capacity of the specimens were significantly enhanced. The ultimate loading capacity increased with increasing the length-to-height ratio of steel plate and yield strength of steel plate; and such capacity increased with decreasing of height-to-thickness ratio of steel plate and gap. Finally, a unified formula is proposed to calculate their ultimate loading capacity, and fitting formula on such indexes are provided for designation of the CDB.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Alavi, E. and Nateghi, F. (2013), "Experimental study of diagonally stiffened steel plate shear walls", J. Struct. Eng., 139(11), 1795-1811. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000750
  2. Astaneh-Asl, A. (2001), Seismic behavior and design of steel shear walls, Steel TIPS rep., Structural Steel Educational Council, Moraga (CA).
  3. Astaneh-Asl, A. (2002), Seismic behavior and design of composite steel plate shear walls, Steel TIPS rep., Structural Steel Educational Council, Moraga (CA).
  4. Clayton, P.M., Berman, J.W. and Lowes, L.N. (2015), "Seismic performance of self-centering steel plate shear walls with beamonly-connected web plates". J. Constr. Steel. Res., 106(1), 198-208. https://doi.org/10.1016/j.jcsr.2014.12.017
  5. GB/T 228 (2002), Tensile Test Method for Metal Materials at Room Temperature, Chinese Standard Press, Beijing, China.
  6. GB/T 50081 (2002), Standard for Test Method of Mechanical Properties on Ordinary Concrete, Chinese Architecture & Building Press, Beijing, China.
  7. Guo, L.H., Rong, Q., Ma, X.B. and Zhang, S.M. (2011), "Behavior of steel plate shear wall connected to frame beams only", Int. J. Steel. Struct., 11(4), 467-479. https://doi.org/10.1007/s13296-011-4006-7
  8. Horii, H., Kabele, P. and Takeuchi, S. (1998), "On the prediction method for the structural performance of repaired/ retrofitted structures", Fracture Mechanics in Concrete Structures: Proceedings of FRAMCOS-3, AEDIFICATIO Publishers, Freiburg, Germany.
  9. Hong, S.G., Cho, B.H., Chung, K.S. and Moon, J.H. (2011), "Behavior of framed modular building system with double skin steel panels". J. Constr. Steel. Res., 67(2), 936-946. https://doi.org/10.1016/j.jcsr.2011.02.002
  10. Jahanpour, A., Jonsson, J. and Moharrami, H. (2012), "Seismic behavior of semi-supported steel shear walls", J. Constr. Steel. Res., 74(7), 118-133. https://doi.org/10.1016/j.jcsr.2012.02.014
  11. Jahanpour, A. and Moharrami, H. (2015), "Evaluation of behavior of the secondary columns in semi-supported steel shear walls", Thin-Wall. Struct., 93(3), 94-111. https://doi.org/10.1016/j.tws.2015.03.015
  12. JGJ 101 (1997), Specification of Testing Methods for Earthquake Resistant Building, Chinese Architecture & Building Press, Beijing, China.
  13. Jiang, L.Q., Zheng, H., Yuan, X.S. and Sun, N. (2014), "The elastic mechanics calculation method for a steel plate deepbeam subjected to horizontal loads", Eng. Mech., 31(2), 146-163. (in Chinese)
  14. Jiang, L.Q., Zheng, H., Liu, Y. and Yuan, X.S. (2014), "Experimental investigation of composite steel plate deep beam infill steel frame", Int. J. Steel. Struct., 14(3), 479-488. https://doi.org/10.1007/s13296-014-3005-x
  15. Jiang, L.Q., Zheng, H., Zhao, P. and Wei, L. (2015), "Elastic buckling analysis on deep steel plate girders subjected to horizontal loading", Pro. Steel Build. Struct., 17(2), 1-6. (in Chinese)
  16. Jiang, L.Q., Zheng, H. and Hu, Y. (2016), "Seismic behaviour of a steel frame partially infilled with precast reinforced concrete wall", Adv. Struct. Eng., 19(10), 1637-1649. https://doi.org/10.1177/1369433216646020
  17. Ju, R.S., Lee, H.J., Chen, C.C. and Tao, C.C. (2012), "Experimental study on separating reinforced concrete infill walls from steel moment frames", J. Constr. Steel. Res., 71(4), 119-128. https://doi.org/10.1016/j.jcsr.2011.10.004
  18. Kahn, L.F. and Hanson, R.D. (1979), "Infill walls for earthquake strengthening", J. Struct. Div., 105(ST4), 283-296.
  19. Kesner, K.E. (2003), Development of seismic strengthening and retrofit strategies for critical facilities using engineered cementitious composite materials, Ithaca, NY: Cornell University.
  20. Kesner, K.E. and Bilington, S.L. (2005), "Investigation of infill panels made from engineered cementitious composites for seismic strengthening and retrofit", J. Struct. Eng., 131(11), 1712-1720. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1712)
  21. Kurata, M., Leon, R.T., DesRoches, R. and Nakashima, M. (2012), "Steel plate shear wall with tension-bracing for seismic rehabilitation of steel frames", J. Constr. Steel. Res., 71(4), 92-103. https://doi.org/10.1016/j.jcsr.2011.10.026
  22. Wang, M., Yang, W.G., Shi, Y.J. and Xu, J. (2015), "Seismic behaviors of steel plate shear wall structures with construction details and materials", J. Constr. Steel. Res., 107(4), 194-210. https://doi.org/10.1016/j.jcsr.2015.01.007
  23. Wang, M., Shi, Y.J., Xu, J., Yang, W.G. and Li, Y.X. (2015), "Experimental and numerical study of unstiffened steel plate shear wall structures", J. Constr. Steel. Res., 112(9), 373-386. https://doi.org/10.1016/j.jcsr.2015.05.002

피인용 문헌

  1. Experimental and numerical evaluation of rigid column to baseplate connection under cyclic loading pp.15417794, 2019, https://doi.org/10.1002/tal.1596
  2. Effectiveness of diagonal shear reinforcement on reinforced concrete short beams vol.17, pp.5, 2017, https://doi.org/10.12989/eas.2019.17.5.501