Abstract
Using a precursor of $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ as a starting material, a surface-modified cathode material was obtained by coating with KCl, where the added KCl reduces residual Li compounds such as $Li_2CO_3$ and LiOH, on the surface. The resulting electrochemical properties were investigated. The amounts of $Li_2CO_3$ and LiOH decreased from 8,464 ppm to 1,639 ppm and from 8,088 ppm to 6,287 ppm, respectively, with 1 wt% KCl added $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ that had been calcined at $800^{\circ}C$. X-ray diffraction results revealed that 1 wt% of KCl added $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ did not affect the parent structure but enhanced the development of hexagonal crystallites. Additionally, the charge transfer resistance ($R_{ct}$) decreased dramatically from $225{\Omega}$ to $99{\Omega}$, and the discharge capacity increased to 182.73mAh/g. Using atomic force microscopy, we observed that the surface area decreased by half because of the exothermic heat released by the Li residues. The reduced surface area protects the cathode material from reacting with the electrolyte and hinders the development of a solid electrolyte interphase (SEI) film on the surface of the oxide particles. Finally, we found that the introduction of KCl into $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ is a very effective method of enhancing the electrochemical properties of this active material by reducing the residual Li. To the best of our knowledge, this report is the first to demonstrate this phenomenon.
$LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$의 전구체 물질에 KCl을 첨가함으로써, 리튬카보네이트($Li_2CO_3$)와 리튬수산화물(LiOH)의 양을 감소시켰을 때 전기화학특성에 어떤 영향을 주는지에 대한 연구를 진행하였다. KCl을 1 질량 %로 전구체에 첨가하여 $800^{\circ}C$에서 열처리 한 샘플의 경우, 첨가하지 않은 재료와 대비하여 잔류하는 리튬카보네이트($Li_2CO_3$)는 8,464 ppm에서 1,639 ppm으로 리튬수산화물(LiOH)은 8,088 ppm에서 6,287 ppm으로 크게 감소하였다. XRD 분석결과 KCl의 첨가는 모상구조에 영향을 주지 않았으며, 층상구조 결정성이 약간 개선되는 효과가 확인되었다. 또한, 전하전달 저항($R_{ct}$)은 $255{\Omega}$에서 KCl 첨가 시 $99{\Omega}$으로 감소하였다. 초기 방전 용량은 171.04 mAh/g에서 182.73 mAh/g으로 증가하였으며 싸이클 특성도 개선되었다. 특히, AFM 분석을 통하여 표면적이 50% 감소하는 것을 확인하였는데, 이는 잔류리튬의 산화반응으로 인한 열 때문일 것으로 해석되고, 전해질과의 부반응을 억제할 수 있는 장점이 있었다. 잔류리튬 제거를 위해 KCl을 첨가한 연구는, 아직까지 발표된 바가 없으며, $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$계 양극활물질의 전기화학특성을 개선하는데 매우 효과적임을 본 연구를 통해 확인할 수 있었다.