Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Simple Sensorless Control of Interior Permanent Magnet Synchronous Motor Using PLL Based on Extended EMF

  • Received : 2016.07.01
  • Accepted : 2016.10.28
  • Published : 2017.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes an improved sensorless control to estimate the rotor position of an interior permanent magnet synchronous motor. A phase-locked loop (PLL) is used to obtain the phase angle of the grid. The rotor position can be estimated using a PLL based on extended electromotive force (EEMF) because the EEMF contains information about the rotor position. The proposed method can reduce the burden of calculation. Therefore, the control period is decreased. The simulation and experimental results confirm the effectiveness and performance of the proposed method.

Keywords

References

  1. J. M. Kim and S. K. Sul, "Speed Control of Interior Permanent Magnet Synchronous Motor Drive for the Flux Weakening Operation," IEEE Trans. Ind. Appl., vol. 33, no. 1, pp. 43-48, Jan./Feb. 1997. https://doi.org/10.1109/28.567075
  2. S. M. Kim, Y. D. Yoon, and S. K. Sul, "Maximum Torque per Ampere (MTPA) Control of an IPM Machine Based on Signal Injection Considering Inductance Saturation," IEEE Trans. Power Electron., vol. 28, no. 1, pp. 488-497, Jan. 2013. https://doi.org/10.1109/TPEL.2012.2195203
  3. Y. S. Cho, K. B. Lee, J. H. Song, and Y. I. Lee, "Torque-Ripple Minimization and Fast Dynamic Scheme for Torque Predictive Control of Permanent Magnet Synchronous Motors," IEEE Trans. Power Electron., vol. 30, no. 4, pp. 2182-2190, Apr. 2015. https://doi.org/10.1109/TPEL.2014.2326192
  4. H. Kim, J. Hartwig, and R. Lorenz, "Using On-Line Parameter Estimation to Improve Efficiency of IPM Machine Drives," in Proc. IEEE Power Electron. Spec. Conf., vol. 2, pp. 815-820, 2002.
  5. Y. Zhao, W. Qiao, and L. Wu, "An Adaptive Quasi-Sliding-Mode Rotor Position Observer-Based Sensorless Control for Interior Permanent Magnet Synchronous Machines," IEEE Trans. Power Electron., vol. 28, no. 12, pp. 5618-5629, Dec. 2013. https://doi.org/10.1109/TPEL.2013.2246871
  6. R. Wrobel, A. S. Budden, D. Salt, D. Holliday, P. H. Mellor, A. Dinu, and P. Sangha, "Rotor Design for Sensorless Position Estimation in Permanent Magnet Machines," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 3815-3824, Sep. 2011. https://doi.org/10.1109/TIE.2010.2093484
  7. G. Wang, R. Yang, and D. Xu, "DSP-Based Control of Sensorless IPMSM Drives for Wide-Speed-Range Operation," IEEE Trans. Ind. Electron., vol. 60, no. 2, pp. 720-727, Feb. 2013. https://doi.org/10.1109/TIE.2012.2205360
  8. G. Foo and M. Rahman, "Sensorless Sliding-Mode MTPA Control of an IPM Synchronous Motor Drive Using a Sliding-Mode Observer and HF Signal Injection," IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1270-1278, Apr. 2010. https://doi.org/10.1109/TIE.2009.2030820
  9. Y. Mao, J. Yang, D. Yin, and Y. Chen, "Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation," J. Power Electron., vol. 16, no. 6, pp. 2150-2161, Nov. 2016. https://doi.org/10.6113/JPE.2016.16.6.2150
  10. T. M. Yoon, J. S. Lee, and K. B. Lee, "Rotor Position Estimation Method of IPMSM Using HF Signal Injection and Sliding-Mode Controller," IEEJ Trans. Electr. Electron. Eng., vol. 9, no. S1, pp. S56-S63, Oct. 2014. https://doi.org/10.1002/tee.22034
  11. C. H. Hong, J. Lee, and D. M. Lee, "Sensorless Scheme for Interior Permanent Magnet Synchronous Motors with a Wide Speed Control Range," J. Power Eletron., vol. 16, no. 6, pp. 2173-2181, Nov. 2016. https://doi.org/10.6113/JPE.2016.16.6.2173
  12. K. G. Lee, J. S. Lee, and K. B. Lee, "Wide-Range Sensorless Control for SPMSM Using an Improved Full-Order Flux Observer," J. Power Eletron., vol. 15, no. 3, pp. 721-729, May 2015. https://doi.org/10.6113/JPE.2015.15.3.721
  13. D. Y. Han, Y. S. Cho, and K. B. Lee, "Simple Rotor Position Estimation for Sensorless Control of IPMSM Using PLL Based on EEMF", in Proc. IEEE ITEC Asia-Pacific, pp.1-5, June 2016.
  14. Z. Chen, M. Tomita, S. Doki, and S. Okuma, "An Extended Electromotive Force Model for Sensorless Control of Interior Permanent Magnet Synchronous Motors," IEEE Trans. Ind. Electron., vol. 50, no. 2, pp. 288-295, Apr. 2003. https://doi.org/10.1109/TIE.2003.809391
  15. G. D. Andreescu, C. I. Pitic, F. Blaabjerg, and I. Boldea, "Combined Flux Observer with Signal Injection Enhancement for Wide Speed Range Sensorless Direct Torque Control of IPMSM Drives," IEEE Trans. Energy Convers., vol. 23, no. 2, pp. 393-402, Jun. 2008. https://doi.org/10.1109/TEC.2007.914386
  16. S. Morimoto, K. Kawamoto, M. Sanada, and Y. Takeda, "Sensorless Control Strategy for Salient-Pole PMSM Based on Extended EMF in Rotating Reference Frame," IEEE Trans. Ind. Appl., vol. 38, no. 4, pp. 1054-1061, Jul./Aug. 2002. https://doi.org/10.1109/TIA.2002.800777
  17. L. Jingbo, T. A. Nondahl, P. B. Schmidt, S. Royak, and M. Harbaugh, "Rotor position estimation for synchronous machines based on equivalent EMF," IEEE Trans. Ind. Appl., vol. 47, no. 3, pp. 1310-1318, May/Jun. 2011. https://doi.org/10.1109/TIA.2011.2125935
  18. S. Y. Kim, C. Choi, K. Lee, and W. Lee, "An improved rotor position estimation with vector-tracking observer in PMSM drives with low-resolution halleffect sensors," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4078-4086, Sep. 2011. https://doi.org/10.1109/TIE.2010.2098367

Cited by

  1. Impact of Observability and Multi-objective Optimization on the Performance of Extended Kalman Filter for DTC of AC Machines vol.14, pp.1, 2019, https://doi.org/10.1007/s42835-018-00019-3
  2. A Parameter Identification Method Based on Forgetting Factor Dynamic Adjustment for PMSM Applied to the Rapid Control of Satellite Attitude vol.14, pp.1, 2019, https://doi.org/10.1007/s42835-018-00049-x