DOI QR코드

DOI QR Code

Seismic fragility of a typical bridge using extrapolated experimental damage limit states

  • Liu, Yang (School of Civil Engineering, Harbin Institute of Technology) ;
  • Paolacci, Fabrizio (Department of Engineering, Roma Tre University) ;
  • Lu, Da-Gang (School of Civil Engineering, Harbin Institute of Technology)
  • 투고 : 2017.10.09
  • 심사 : 2018.01.16
  • 발행 : 2017.12.25

초록

This paper improves seismic fragility of a typical steel-concrete composite bridge with the deck-to-pier connection joint configuration at the concrete crossbeam (CCB). Based on the quasi-static test on a typical steel-concrete composite bridge model under the SEQBRI project, the damage states for both of the critical components, the CCB and the pier, are identified. The finite element model is developed, and calibrated using the experimental data to model the damage states of the CCB and the bridge pier as observed from the experiment of the test specimen. Then the component fragility curves for both of the CCB and the pier are derived and combined to develop the system fragility curves of the bridge. The uncertainty associated with the mean system fragility has been discussed and quantified. The study reveals that the CCB is more vulnerable than the pier for certain damage states and the typical steel-concrete composite bridge with CCB exhibits desirable seismic performance.

키워드

과제정보

연구 과제번호 : Performance-Based Earthquake Engineering Analysis of Short-Medium Span Steel-Concrete Composite Bridges

연구 과제 주관 기관 : SEQBRI, National Science Foundation of China, Ministry of Science and Technology of China

참고문헌

  1. Baker, J. W. (2013), "Efficient analytical fragility function fitting using dynamic structural analysis", Earthq. Spectra, 31(1), 579-599. https://doi.org/10.1193/021113EQS025M
  2. Banerjee, S. and Chi, C. (2013), "State-dependent fragility curves of bridges based on vibration measurements", Prob. Eng. Mech., 33(10), 116-125. https://doi.org/10.1016/j.probengmech.2013.03.007
  3. Berry, M. and Eberhard, M. O. (2003), "Performance models for flexural damage in reinforced concrete columns", PEER Report 2003/18; Pacific Earthquake Engineering Research Center, College of Engineering, University of California, Berkeley.
  4. Billah, A. M., Alam, M. S. and Bhuiyan, M. R. (2012), "Fragility analysis of retrofitted multicolumn bridge bent subjected to near-fault and far-field ground motion", J. Bridge Eng., 18(10), 992-1004. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000452
  5. Bursi, O. S., Ferrario, F. and Fontanari, V. (2002), "Non-linear analysis of the low-cycle fracture behaviour of isolated tee stub connections", Comput. Struct., 80(27-30), 2333-2360. https://doi.org/10.1016/S0045-7949(02)00252-3
  6. Celik, O. C. and Ellingwood, B. R. (2010), "Seismic fragilities for non-ductile reinforced concrete frames-role of aleatoric and epistemic uncertainties", Struct. Saf., 32(1), 1-12. https://doi.org/10.1016/j.strusafe.2009.04.003
  7. CEN (2005), Eurocode 8: Design of Structures for Earthquake Resistance, Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  8. CEN (2005), Eurocode 8: Design of Structures for Earthquake Resistance-Part 3: Assessment and Retrofitting of Buildings, European Committee for Standardization; Brussels, Belgium
  9. CEN (2006), Eurocode 4: Design of Composite Steel and Concrete Structures, European Committee for Standardization; Brussels, Belgium.
  10. Cornell, C. A., Jalayer, F., Hamburger, R. O. and Foutch, D. A. (2002), "Probabilistic basis for 2000 sac federal emergency management agency steel moment frame guidelines", J. Struct. Eng., 128(4), 526-533. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(526)
  11. ECCS (1986), Recommended Testing Procedure for assessing the Behaviour of Structural Steel Elements under Cyclic Load, ECCS - European Convention for Constructional Steelwork.
  12. Frankie, T. M. (2013), "Impact of complex system behavior on seismic assessment of RC bridges", Ph. D. Dissertation; University of Illinois at Urbana-Champaign, Illinois.
  13. Gattesco, N. and Giuriani, E. (1996), "Experimental study on stud shear connectors subjected to cyclic loading", J. Constr. Steel Res., 38(1), 1-21. https://doi.org/10.1016/0143-974X(96)00007-7
  14. Han, Q., Zhou, Y., Du, X., Huang, C. and Lee, G. C. (2014), "Experimental and numerical studies on seismic performance of hollow RCbridge columns", Earthq. Struct., 7(3), 251-269. https://doi.org/10.12989/eas.2014.7.3.251
  15. Han, Q., Zhou, Y., Ou, Y. and Du, X. (2017), "Seismic behavior of reinforced concrete sacrificial exterior shear keys of highway bridges", Eng. Struct., 139, 59-70. https://doi.org/10.1016/j.engstruct.2017.02.034
  16. Ibarra, L. F. (2005), "Global collapse of frame structures under seismic excitations", Ph. D. Dissertation; Stanford University.
  17. Iman, R. L. (2008), Latin Hypercube Sampling, John Wiley & Sons, Ltd.
  18. Liu, Y., Lu, D. G. and Paolacci, F. (2015), "Multivariate probabilistic seismic demand analysis of steel-concrete composite bridges under near-fault pulse-like ground motions", International Conference on Multi-Span Large Bridges, Portugal.
  19. Liu, Y., Lu, D. G. and Paolacci, F. (2016), "Probabilistic seismic resilience analysis for bridges shocked by near-fault pulse-like ground motions", Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks -Proceedings of the Eighth International Conference on Bridge Maintenance, Safety and Managemen, Foz do Iguacu, Brazil, June.
  20. Lu, D. G., Yu, X. H., Jia, M. M. and Wang, G. Y. (2014), "Seismicrisk assessment for a reinforced concrete frame designed according to chinese codes", Struct. Infrastr. Eng., 10(10), 1295-1310. https://doi.org/10.1080/15732479.2013.791326
  21. Luco, N. and Cornell, C. A. (2007), "Structure-specific scalar intensity measures for near-source and ordinary earthquake ground motions", Earthq. Spectra, 23(2), 357-392. https://doi.org/10.1193/1.2723158
  22. Mazzoni, S., Mckenna, F., Scott, M. H. and Fenves, G. L. (2006), Opensees Command Language Manual, Pacific Earthquake Engineering Research Center.
  23. Muntasir Billah, A. and Shahria Alam, M. (2015), "Seismic fragility assessment of highway bridges: A state-of-the-art review", Struct. Infrastr. Eng., 11(6), 804-832. https://doi.org/10.1080/15732479.2014.912243
  24. NGA-west2 (2017), NGA-west2 Strong Ground Motion Database; Pacific Earthquake Engineering Research Center, America. http://peer. berkeley. edu/ngawest2/databases/.
  25. Nielson, B. G. (2005), "Analytical fragility curves for highway bridges in moderate seismic zones", Ph. D. Dissertation; Georgia Institute of Technology.
  26. Padgett, J. E. and Desroches, R. (2008), "Methodology for the development of analytical fragility curves for retrofitted bridges", Earthq. Eng. Struct. Dyn., 37(8), 1157-1174. https://doi.org/10.1002/eqe.801
  27. Paolacci, F., Giannini, R., Malena, M., Slessandri, S. and Paglini, A. (2014), "Toward a performance-based earthquake engineering analysis of short-medium span steel-concrete composite bridges", Proceedings of the European Conference on Earthquake Engineering.
  28. Paolacci, F., Bursi, O. S., Popa, N., Cremona, C., Stathopoulos, S. and Hoffmeister, B. (2016), "Performance-based earthquake engineering analysis of short-medium span steel-concrete composite bridges", RFSR-CT-2012-00032; Roma Tre University.
  29. Porter, K., Kennedy, R. and Bachman, R. (2007), "Creating fragility functions for performance-based earthquake engineering", Earthq. Spectra, 23(2), 471-489. https://doi.org/10.1193/1.2720892
  30. Sengupta, P. and Li, B. (2013), "Modified Bouc-Wenmodel for hysteresis behavior of RCbeam-column joints with limited transverse reinforcement", Eng. Struct., 46(46), 392-406. https://doi.org/10.1016/j.engstruct.2012.08.003
  31. Sengupta, P. and Li, B. (2014), "Seismic fragility evaluation of lightly reinforced concrete beam-column joints", J. Earthq. Eng., 18(7), 1102-1128. https://doi.org/10.1080/13632469.2014.919890
  32. Stefanidou, S. P. and Kappos, A. J. (2017), "Methodology for the development of bridge‐-specific fragility curves", Earthq. Eng. Struct. Dyn., 46(1), 73-93. https://doi.org/10.1002/eqe.2774
  33. Tondini, N. and Stojadinovic, B. (2012), "Probabilistic seismic demand model for curved reinforced concrete bridges", Bull. Earthq. Eng., 10(5), 1455-1479. https://doi.org/10.1007/s10518-012-9362-y
  34. Tubaldi, E., Barbato, M. and Dall'asta, A. (2010), "Transverse seismic response of continuous steel-concrete composite bridges exhibiting dual load path", Earthq. Struct., 1(1), 21-41. https://doi.org/10.12989/eas.2010.1.1.021
  35. Zhai, C. H., Chang, Z. W., Li, S., Chen, Z. Q. and Xie, L. L. (2013), "Quantitative identification of near-fault pulse-like ground motions based on energy", Bull. Seismol. Soc. Am., 103(5), 2591-2603. https://doi.org/10.1785/0120120320