참고문헌
- L. J. M. van de Klundert and H. H. J. ten Kate, "Fully superconducting rectifiers and flux pumps Part 1: Realized methods for pumping flux," Cryogenics, vol. 21, no. 4, pp. 195-206, 1981. https://doi.org/10.1016/0011-2275(81)90195-8
- L. J. M. van de Klundert and H. H. J. ten Kate, "On fully superconducting rectifiers and flux pumps. A review. Part 2: Commutation modes, characteristics and switches," Cryogenics, vol. 21, no. 5, pp. 267-277, 1981. https://doi.org/10.1016/0011-2275(81)90002-3
- J. Lee, et al., "Experimental Analysis of Thermally and Magnetically Triggered Switch for High-Tc Superconducting Power Converting System," IEEE Trans. Appl. Supercond., vol. 26, no. 4, p.5000204, 2016.
- J. Lee, et al., "Experimental analysis of charging characteristics of an HTS field coil with contactless HTS excitation device considering various HTS loads," will be published at the IEEE Trans. Appl. Supercond., 2018.
- H. Jeon, et al., "Methods for increasing the saturation current and charging speed of a rotary HTS flux-pump to charge the field coil of a synchronous motor," will be published at the IEEE Trans. Appl. Supercond., 2018.
- J. Lee, "Comparative characteristics of rotary HTS flux-pump considering rotational state of HTS load," presented at the European Conf. Applied Superconductivity, Geneva, Switzerland, 2017.
- J. Geng, et al., "Origin of dc voltage in type II superconducting flux pumps: field, field rate of change, and current density dependence of resistivity," J. Phys. D. Appl. Phys., vol. 49, no. 11, p. 11LT01, 2016. https://doi.org/10.1088/0022-3727/49/11/11LT01
- H. -W. Kim, "2G HTS magnet stability improvement via V2O3 material and perforated HTS wire," presented at the 25th International Conf. on Magnet Technology, Amsterdam, Netherlands, 2017.
- Y. -S. Jo, "HTS magnet with smart insulation method," presented at the 25th International Conf. on Magnet Technology, Amsterdam, Netherlands, 2017.
- C. J. Hyeon, "Thermal quench characteristics of 2G HTS race track field coil with kapton polyimide insulation and smart insulation materials," presented at the 25th International Conf. on Magnet Technology, Amsterdam, Netherlands, 2017.
- T. D. Le, et al., "Design of indirect closed-cycle cooling scheme coupled with a cryocooler for a 3-MW-class high-temperature superconducting synchronous motor," IEEE Trans. Appl. Supercond., vol. 26, no. 4, Art. ID. 5204904, 2016
- T. D. Le, et al., "A compactly integrated cooling system of a combination dual 1.5-MW HTS motors for electric propulsion," Progr. Supercond. Cryogenics, vol. 18, no. 4, pp. 25-29, 2016. https://doi.org/10.9714/PSAC.2016.18.4.025
- J. H. Kim, et al., "Analysis of the mechanical characteristics of a 17-MW-class high-temperature superconducting synchronous motor," J. Supercond. Nov. Magn., vol. 28, no. 2, pp. 671-679, 2015. https://doi.org/10.1007/s10948-014-2810-y
- J. M. Gere, Mechanics of Materials, 6th ed., INTERVISION, 2006,
- Material measurement laboratory in NIST. [Online] Available: http://cryogenics.nist.gov/MPropsMAY/G10%20CR%20Fiberglass%20Epoxy/G10CRFiberglassEpoxy_rev.htm
- Y. Iwasa, Case Studies in Superconducting Magnets: Design and Operational Issues, 2nd ed., New York, NY, USA: Springer-Verlag, 2009, pp. 248-250.