DOI QR코드

DOI QR Code

Characterization of electromechanical properties of Sn-Cu double layer stabilized GdBCO coated conductor tapes at 77 K

  • 투고 : 2017.11.24
  • 심사 : 2017.12.19
  • 발행 : 2017.12.31

초록

The promising characteristics of 2G high-temperature superconductor (HTS) coated conductor (CC) tapes have made it possible to apply to various electrical device applications. In this study, the mechanical and electromechanical properties of Sn-Cu double layer stabilized GdBCO CC tapes have been characterized. The stress and strain tolerances of $I_c$ in GdBCO CC tapes adopting stainless steel substrate were evaluated using $I_c$-strain measurement at 77 K under both uniaxial tension and monotonic bending conditions. The results were compared to the conventional single Cu layer stabilized CC tape. As a result, the Sn-Cu double layer stabilized GdBCO CC tapes showed somehow lower or comparable electromechanical properties as compared to the Cu stabilized CC tape ones.

키워드

참고문헌

  1. T. Matsushita, and M. Kiuchi, "Development of innovative superconducting DC power cable," Prog. Supercond. Cryog., vol. 19, no. 3, pp. 1-7, 2017. https://doi.org/10.9714/psac.2017.19.1.001
  2. X. Obrador and T. Puig, "Coated conductors for power applications: materials challenges," Supercond. Sci. Technol., vol. 27, p. 044003, 2014. https://doi.org/10.1088/0953-2048/27/4/044003
  3. C. Senatore, M. Alessandrini, A. Lucarelli, R. Tediosi, D. Uglietti, and Y. Iwasa, "Progress and challenges in the development of high-field solenoidal magnets based on RE123 coated conductors," Supercond. Sci.Technol., vol. 27, p. 103001, 2014. https://doi.org/10.1088/0953-2048/27/10/103001
  4. K. Kim, K. R. Bhattarai, J. Y. Jang, Y. J. Hwang, K. Kim, S. Yoon, S. G. Lee and S. Hahn, "Design and performance estimation of a 35 T 40 mm no-insulation all-REBCO user magnet," Supercond. Sci. Technol., vol. 30, no. 6, p. 065008, 2017. https://doi.org/10.1088/1361-6668/aa6677
  5. N. C. Allen, F. Pierro, Z. Zhao, L. Chiesa, and M. Takayusa, "Stractural finite element evaluation of twisted stacked-tape cables for high-field magnets," IEEE Trans. Appl. Supercond., vol. 27, no. 4, 2017.
  6. H. S. Shin, and M. J. Dedicatoria, "Variation of the strain effect on the critical current due to external lamination in REBCO coated conductors," Supercond. Sci. Technol., vol. 25, p. 054013, 2012. https://doi.org/10.1088/0953-2048/25/5/054013
  7. W. Goldacker, F. Grilli, E. Pardo, A. Kario, S. Schlachter and M. Vojenciak, "Roebel cables from REBCO coated conductors: a one-century-old concept for the superconductivity of the future," Supercond. Sci. Technol., vol. 27, p. 093001, 2014. https://doi.org/10.1088/0953-2048/27/9/093001
  8. M. Sugano, K. Shikimachi, N. Hirano and S. Nagaya, "The reversible strain effect on critical current over a wide range of temperatures and magnetic fields for YBCO coated conductors," Supercond. Sci. Technol., vol. 23, no. 8, p. 085013, 2010. https://doi.org/10.1088/0953-2048/23/8/085013
  9. K. Osamura, S. Machiya and D. P. Hampshire, "Mechanism for the uniaxial strain dependence of the critical current in practical REBCO tapes," Supercond. Sci. Technol., vol. 29, p. 065019, 2016. https://doi.org/10.1088/0953-2048/29/6/065019
  10. D. C. van der Laan, J. W. Ekin, J. F. Douglas, C. C. Clickner, T. C. Stauffer, and L. F. Goodrich, "Effect of strain, magnetic field and field angle on the critical current density of $YBa2Cu3O7-{\delta}$ coated conductors," Supercond. Sci. Technol., vol. 23, no. 7, 2010.
  11. M. J. Dedicatoria and H. S. Shin, "Analysis on stress/strain tolerances of Ic in externally laminated GdBCO CC tapes," IEEE Trans. Appl. Supercond., vol. 23, no. 3, p. 8400504, 2013. https://doi.org/10.1109/TASC.2012.2234196
  12. H. S. Shin, K. H. Kim, J. R. C. Dizon, T. Y. Kim, R. K. Ko, S. S. Oh, "The strain effect on the critical current in YBCO coated conductors with a different stabilizing layer," Supercond. Sci. Tech., vol. 18, no. 12, pp. S364-S368, 2005. https://doi.org/10.1088/0953-2048/18/12/023
  13. S. Ochiai, H. Okuda, T. Arai, M. Sugano, K. Osamura and W. Prusseit, "Influence of Copper volume fraction in tensile strain/stress tolerances of critical current in a Copper-plated DyBCO-coated conductor," The Japan Institute of Metals, vol. 54, no. 3, pp. 269-275, 2013.
  14. Z. Bautista, H. S. Shin, J. H. Lee, H. Lee and S. H. Moon, "Influence of brass laminate volume fraction on electromechanical properties of externally laminated coated conductor tapes," Prog. Supercond. Cryog., vol. 18, no. 3, pp. 6-9, 2016. https://doi.org/10.9714/psac.2016.18.3.006
  15. H. S. Shin, M.J. Dedicatoria, and S.S. Oh, "Critical current degradation behavior in lap-jointed coated conductor tapes with IBAD substrate under uniaxial tension," IEEE Trans. Appl. Supercond., vol. 20, pp. 1447-14570, 2010. https://doi.org/10.1109/TASC.2010.2042049
  16. A. Nyilas, "Strain sensing system tailored for tensile measurement of fragile wires," Supercond. Sci. Technol., vol. 18, pp. 409-415, 2005. https://doi.org/10.1088/0953-2048/18/12/031
  17. H. S. Shin and K. Katagiri, "Critical current degradation in Bi-2223 superconducting tapes under bending and torsion strains," Supercond. Sci. Technol., vol. 16, no. 9, pp. 1012-1018, 2003. https://doi.org/10.1088/0953-2048/16/9/309
  18. K. Osamura, S. Machiya and G. Nishijima, "Reversible stress and strain limits of the critical current of practical REBCO and BSCCO wires," Supercond. Sci. Technol., vol. 29, no. 9 p. 094003, 2016. https://doi.org/10.1088/0953-2048/29/9/094003

피인용 문헌

  1. Investigation of the electromechanical behaviors in Cu-stabilized GdBCO coated conductor tapes using high-cycle fatigue tests at 77 K and related fractographic observations vol.33, pp.2, 2017, https://doi.org/10.1088/1361-6668/ab617b