참고문헌
- Kim, K. Y., Kwak, S. H., Han, G. D., Park, J. S., Cho, J. H., Lee, C. H., Kang, M. C., "Formability Evaluation with the Vacuum Resin Transfer Molding of a CFRP Composite Automobile Seat Cross Part," Journal of the Korean Society of Manufacturing Process Enginee Vol. 16, No. 3, pp. 24-29, 2017.
- Han, B. J., Jeong. Y. C., Hwang. K. H., Kang, M. C., "Performance and Feasibility Evaluation of Straight-Type Mixing Head in High-Pressure Resin Transfer Molding Process of Carbon Fiber Reinforced Composite Material," Journal of the Korean Society of Manufacturing Process Enginee, Vol. 16, No. 5, pp. 157-65, 2017. https://doi.org/10.14775/ksmpe.2017.16.5.157
- Kang, H., Kyoung, W. M., "Structural Design Optimization of the Aluminum Space Frame Vehicle," Transactions of KSAE, Vol. 16, No. 1, pp. 175-180, 2008.
- Zhou, J., Wan, X., Li, Y., "Advanced aluminium products and manufacturing technologies applied on vehicles presented at the EuroCarBody conference" Materials Today: Proceedings, Vol. 2, Issue 10, pp. 5015-22, 2015. https://doi.org/10.1016/j.matpr.2015.10.091
- Son, H. J., Kim, S. Y., Oh, B. S., Kim, K. S., "Development of Vehicle Door Side Impact Beam with High Tensile Steel using Roll Forming Process," Journal of the Korean Society of Manufacturing Process Enginee, Vol. 11, No. 6, pp. 82-87, 2012.
- Jung, D. W., Kim, D. H., Kim, B. C., "A Study on Development of Automotive Panel of Bumper Reinforcement with High Strength Steel Using Roll Forming Process," Jorunal of the Korean Society for Precision Engineering, Vol. 29, No. 8, pp. 840-844, 2012. https://doi.org/10.7736/KSPE.2012.29.8.840
- Lee, I. K., Lee, S. Y., Lee, S. K., Ahn, M. S., "Trimless Blank Design for Hot Stamping Process of a Sill Side," Journal of the Korean Society of Manufacturing Process Enginee, Vol. 15, No. 5, pp. 93-99, 2016.
- Kum, J., Park. O., Hong, S., "Tough High Thermal-Conductivity Tool Steel for Hot Press Forming," J. of KSMPE, Vol. 15, NO. 3, pp. 130-134, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.130
- Han, S. S., "Formability Test of Boron Steel Sheet at Elevated Temperature for Hot Stamping" Transactions of Materials Processing," Vol. 26, No. 2, pp. 121-125, 2017. https://doi.org/10.5228/KSTP.2017.26.2.121
- Merklein, M., Lechler, J., Geiger, M., "Characterisation of the Flow Properties of the Quenchenable Ultra High Strength Steel 22MnB5," CIRP Annals - Manufacturing Technology, Vol. 55, No. 1, pp. 229-232, 2006. https://doi.org/10.1016/S0007-8506(07)60404-1
- Mori, K., Bariani, P. F., Behrens, B. A., Brosius, A., Bruschi, S., Maeno, T., Merklein, M., Yanagimoto, J., "Hot stamping of ultra-high strength steel parts," CIRP Annals - Manufacturing Technology, Vol 66, 755-777, 2017. https://doi.org/10.1016/j.cirp.2017.05.007
- http://global-autonews.com/skin/board/global_basic/print.php ?bo_table=bd_013&wr_id=752
- Jeon, H. B., Song, T. H., Park, H. J., "Surface Hardening Characteristics of High Carbon Steel using High Frequency Induction Hardening," Proceedings of KSME, Vol. 2007, No 11, pp. 74-80, 2007.
- Choi, Y. G., Cho, W. S., Jang. W. Y., "Effect of Prior Structure on the Martensitic Transformation in an Fe-Cr-C Steel," Jorunal of Advanced Engineering and Technology, Vol. 2, No 1, pp. 171-176, 2009.
- Lee, D. H., Yoon, C. S., and Lim, J. D., "Mechanical Properties of High Stength Sheet Steels for Auto-Body by Induction Heat Treatment," Jorunal of the Korean Society for Heat Treatment, Vol. 17, No. 2, pp. 73-77, 2004.
피인용 문헌
- Smart Roll Forming Based on Real-Time Process Data vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.045
- Effect on Drive Point Dynamic Stiffness and Lightweight Chassis Component by using Topology and Topography Optimization vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.141