KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY (한국포장학회지)

Korea Society of Packaging Science and Technology (한국포장학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Application Direction of Finite Element Analysis in the Field of Packaging through Research Trend Analysis in Korea

국내 연구 동향 분석을 통한 포장분야에서 유한요소해석의 적용 방향에 관한 고찰

  • 이학래 (연세대학교 패키징학과) ;
  • 전규배 (연세대학교 패키징학과) ;
  • 고의석 (연세대학교 패키징학과) ;
  • 심원철 (연세대학교 패키징학과) ;
  • 강욱건 (연세대학교 패키징학과) ;
  • 김재능 (연세대학교 패키징학과)
  • Received : 2017.09.20
  • Accepted : 2017.11.20
  • Published : 2017.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Proper packaging design can meet both the environmental and economic aspects of packaging materials by reducing the use of packaging materials, waste generation, material costs, and logistics costs. Finite element analysis(FEM) is used as a useful tool in various fields such as structural analysis, heat transfer, fluid motion, and electromagnetic field, but its application in the field of packaging is still insufficient. Therefore, the application of FEM to the field of packaging can save the cost and time in the future research because it is possible to design the package by computer simulation, and it is possible to reduce the packaging waste and logistics cost through proper packaging design. Therefore, this study investigated the FEM papers published in Korea for the purpose of helping research design using FEM program in the field of packaging in the future. In this paper, we analyzed the 29 papers that were directly related to the analysis of FEM papers published in domestic journals from 1991 to 2017. As a result, we analyzed the research topic, FEM program, and analysis method using each paper, and presented the direction that can be applied in future packaging field. When the FEM is applied to the packaging field, it is possible to change the structure and reduce the thickness through the stress and vibration analysis applied to the packaging material, thereby reducing the cost by improving the mechanical strength and reducing the amount of the packaging material. Therefore, in the field of packaging research in the future, if the FEM is performed together, economical and reasonable packaging design will be possible.

적정포장설계는 포장 원자재 사용량 및 폐기물 발생량뿐만 아니라 재료비 및 물류비 절감이 가능하여 포장재의 환경성과 경제성을 모두 충족시킨다. 유한요소해석은 구조해석, 열전달, 유체운동, 전자기 등 다양한 분야에 유용한 도구로 적용되고 있지만, 포장분야에서는 그 적용이 미비하다. 이에 따라 포장분야에 유한요소해석 적용은 컴퓨터 시뮬레이션으로 포장 설계가 가능하기 때문에 향후 연구에 있어 비용과 시간 절약이 가능하며 적정포장설계를 통해 포장 폐기물과 물류비 절감이 가능할 것으로 판단된다. 따라서 본 연구에서는 향후 포장분야에서 유한요소해석(FEM) 프로그램을 활용한 연구 설계에 도움이 되고자 하는 목적으로 국내에서 발표된 유한요소해석 관련 논문을 조사하였다. 1991년부터 2017년까지의 국내 학술지 및 학위논문에 게재된 유한요소해석 관련 논문 중 포장과 직접적인 연관성이 있다고 판단된 32편의 논문을 분석하여 연구의 동향을 살펴보았다. 그 결과 각 논문을 사용한 연구주제 및 내용, 유한요소해석 프로그램, 해석방법 등으로 분석하고 향후 포장분야에 활용할 수 있는 방향에 대하여 제시하였다. 포장 영역에 유한요소해석의 적용은 포장재에 가해지는 응력 및 진동해석을 통해 구조변경 및 두께 감량을 가능하게 하고 이에 따라 기계적 강도 향상 및 포장소재 사용량 감소를 통해 적정포장설계로 원가 절감이 가능할 것으로 판단된다. 따라서 향후 포장 분야의 연구에 있어, 유한요소해석을 함께 병행한다면 경제적이고 합리적인 포장 설계를 할 수 있을 것으로 판단된다.

Keywords

References

  1. Jung, H. M. 2013. Cushioning efficiency evaluation by using the new determination of cushioning curve in cushioning packaging material design for agricultural products. Korea J. Packag. Sci. Tech. 19: 51-56.
  2. Oh, J. Y. 2009. Cushioning performance analysis of cushioning materials for vibration and impact condition. Korea J. Packag. Sci. Tech. 15: 1-6.
  3. Kim, S. J., Jang, S. H., Kim, K. T., Lee, Y. S., and Park, S. I. 2013. Analysis of glass bottle using glass bottle lightness index. Korea J. Packag. Sci. Tech. 19: 109-115.
  4. Choi, S. R., Jung, H., and Choi, D. S. 2013. The development of pulp mold tray for melon packaging. Korea J. Packag. Sci. Tech. 19: 125-131.
  5. Kim, S. J., Song, J. Y., Yu, M. J., and Park, S. I. 2013. Cosmetic packaging design using cosmetic container's volume index. Korea J. Packag. Sci. Tech. 19: 133-138.
  6. Ye, Y. S. 2003. A study on analysis of polymer extruder process using finite element method. M.S. Dissertation, Sogang University, Seoul, Korea.
  7. Kim, G. Y. 2008. Prediction of the film thickness and pattern variation through film insert thermoforming. M.S. Dissertation, Pusan National University, Busan, Korea.
  8. Yeo, H. T., Choi, Y., and Hur, K. D. 1999. Stress analysis of the prestressed dies by using FEM. J. Korean Soc. Precis. Eng. 16: 114-122.
  9. Lee, H. J. 2011. Optimal design of mold using DRI injection technology. M.S. Dissertation, Pusan National University, Busan, Korea.
  10. Lee, J. S. and Cho, D. H. 1999. Thermal analysis of continuous casting mold. J. Korean Soc. Mach. Tool Engineers 8: 43-49.
  11. Won, J. J., Lee, J. S., and Hong, S. J. 2001. Structural analysis of continuous casting mold. Trans. Korean Soc. Mach. Tool Engineers 10: 104-110.
  12. Kim, J. M. 1998. A Study on the strains in the flange in a square cup drawing. J. Korean Soc. Eng. Res. 29: 403-413. Ulsan University, Ulsan, Korea.
  13. Kim, C. K. 2009. Finite element analysis on the stress and deformation behaviors of a safety helmet. J. Korean Inst. Gas 13: 27-32.
  14. Joo, S. T., Kim, Y. H., and Lyu, M. Y. 2001. Analysis of forming processes of PET bottle using a finite element method. J. Korean Soc. Trans. Mater. Processing 10: 525-533.
  15. Lee, M. G. 2005. A study on the optimized blister method using LS-DYNA. M.A. Dissertation, Chonnam National University, Gwang-Ju, Korea.
  16. Kim, D. S. 2004. Development of the in-mold coating process for injection molding parts of thermoplastics. M.S. Dissertation, Chungang University, Seoul, Korea.
  17. Kim, C. K. and Jeong, N. I. 2007. FEM analysis on the strength safety of a LPG cylinder. J. Korean Inst. Gas 11: 55-59.
  18. Kim, C. K. and Kim, D. H. 2012. Strength safety study on the stress characteristics of a composite pressure cylinder for 35MPa hydrogen gas vehicle. J. Korean Inst. Gas 16: 25-30. https://doi.org/10.7842/kigas.2012.16.2.25
  19. Lim, J. J. and Park, Y. H. 2013. Stability analysis of hazmat tank foundation to prevent leakage accident. J. Korea Soc. Hazardous Mater. 1: 44-48.
  20. Yang, T. H., Hong, J. T., and Yeon, K. W. 2016. A study on the structural integrity of the transport cask for the radioactive material under oblique impact. J. Korean Soc. Mech. Tech. 18: 64-69. https://doi.org/10.17958/ksmt.18.1.201602.64
  21. Kim, C. K. 2015. Effects of corner radius on the stress strength safety of LPG steel cylinder. J. Korean Inst. Gas 19: 18-22.
  22. Kim, H. S., Hong, S. H., and Seo, H. S. 2004. A study on the design optimization of corner protection for LNG storage tank. J. Trans. Korean Soc. Mech. Engineers A 28: 1384-1390.
  23. Son, B. J. and Lee, S. Y. 2015. Finite element stress analysis of large sized rectangular water tank structures made of stainless steel materials. J. Korean Soc. Adv. Comp. Struc. 6: 85-90. https://doi.org/10.11004/kosacs.2015.6.2.085
  24. Kim, Y. W. 2013. Vibration analysis of trapezoidally corrugated plates. J. Trans. Korean Soc. Noise Vibration Eng. 23: 928-934. https://doi.org/10.5050/KSNVE.2013.23.10.928
  25. Lee, J. H. 1994. Design sensitivity analysis for the vibration characteristics of vehicle structure. J. Computational Struct. Eng. Inst. Korea 7: 91-98.
  26. Lee, Y. S., Han J. D., Han, Y. H., and Suh, J. 1996. The vibration and stress analysis of stiffened box structures. J. Korean Soc. Noise Vibration Eng. 6: 147-161.
  27. Kim, H. D., Lee, H. H., Hwang, D. S., and Park, J. S. 2011. Prediction to shock absorption energy of an aluminum honeycomb. J. Korean Soc. Aeronaut. Space Sci. 39: 391-399.
  28. Lee, S. Y. 2009. Evaluation of material mechanics of corrugated board structure by finite element analysis. M.A. Dissertation, Yonsei University, Seoul, Korea.
  29. Nam, J. Y. 2008. Analysis for bending strength of corrugated web girder. M.S. Dissertation, Korea University, Seoul, Korea.
  30. Shim, J. M. 2015. Corrugated packaging simulation by finite element structural analysis - Bending and flat crush behavior. M.S. Dissertation, Pusan National University, Busan, Korea.
  31. Lee, M. H. 2013. Seismic capacity improvement of building structures with honeycomb shaped steel hysteretic damper. M.S. Dissertation, Sungkyunkwan University, Suwon, Korea.
  32. Kim, J. W. 2012. Effects of varied skins on low velocity impact behaviors of sandwich panels containing aluminum honeycomb core. M.S. Dissertation, Changwon National University, Gyeong-Nam, Korea.
  33. Bae, G. Y., Kang, K. C., Yoon, S. H., and Lee, C. H. 2008. Finite element simulation of interface bonding in kinetic sprayed coatings. J. Korea Soc. Welding Joining 26: 74-80.
  34. Gao, T. and Cho, J. U. 2014. A Finite element analysis on compression of aluminum foam bonded with adhesive. J. Korean Soc. Mech. Tech. 16: 2105-2110. https://doi.org/10.17958/ksmt.16.6.201412.2105
  35. Jung, B. Y. and Ryu, S. H. 2001. Surface modification of low density polyethylene and adhesion characteristics of low density polyethylene/aluminum laminate. J. Korea Soc. Elastomer 36: 195-200.
  36. Kim, H. B. L., Park, S. H., and Kim, W. J. 2000. A study on the cushion package design of a monitor using finite element method. J. Korean Soc. Precis. Eng. 17: 88-93.
  37. Kum, D. H., Kim, W. J., Kim, S. D., and Park, S. H. 2004. Optimal design for cushioning package of a heavy electronic product using mechanical drop analysis. J. Korean Soc. Noise Vibration Eng. 14: 128-135. https://doi.org/10.5050/KSNVN.2004.14.2.128
  38. Kim, M. S., Jung, H. M., and Kim, K. B. 2004. Vibration analysis of pear in packaged freight using finite element method. J. Biosyst. Eng. 29: 501-507. https://doi.org/10.5307/JBE.2004.29.6.501