Journal of Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회논문집)

Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회)
권호 표지
DOI QR코드

DOI QR Code

Investigation of Applicability of OpenFOAM for Regular Wave Modeling of Floating Vertical Plate

부유식 연직판의 규칙파 모델링을 위한 오픈폼 적용성 검토

  • Oh, Sang-Ho (Coastal Engineering Division, Korea Institute of Ocean Science and Technology) ;
  • Kim, Gunwoo (Department of Ocean Civil & Plant Construction Engineering, Mokpo National Maritime University)
  • 오상호 (한국해양과학기술원 연안공학연구본부) ;
  • 김건우 (국립목포해양대학교 해양.플랜트건설공학과)
  • Received : 2017.12.07
  • Accepted : 2017.12.26
  • Published : 2017.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study performed an OpenFOAM-based numerical modeling for simulating performance of wave reduction by a floating vertical plate. Based on the Waves2FOAM library, an internal wave generation and energy dissipation with sponge layers schemes were further implemented. The performance of wave generation and dissipation was first tested with a simple two-dimensional analysis. Then, numerical simulation was carried out with the experimental data of Briggs et al. (2001) for the two regular wave cases. In general, the modeling results agreed well with the experimental data, showing better agreement than the numerical analysis by WAMIT that is included in Briggs et al. (2001).

본 연구에서는 OpenFOAM 기반의 부유식 연직판의 파랑 저감 성능 평가 수치해석 모델링을 수행하였다. Waves2FOAM 라이브러리를 기반으로 내부조파에 의한 파랑 생성 및 스폰지층에 의한 소파 기능을 추가로 적용하였다. 이렇게 추가된 조파 및 소파 기능을 먼저 간단한 2차원 해석으로 검증한 후, Briggs et al.(2001)의 규칙파 실험자료 2가지에 대한 수치모델링을 수행하였다. 모델링 결과는 실험자료와 대체로 잘 일치하였으며, Briggs et al.(2001)에 수록된 WAMIT 수치해석 결과보다 더 좋은 결과를 나타내었다.

Keywords

References

  1. Briggs, M.J. (2001). Performance characteristics of a rapidly installed breakwater system,. ERDC/CHL-TR-01-13, U.S. Army Engineer Research and Development Center, Vicksburg, MS.
  2. Briggs, M., Ye, W., Demirbilek, Z. and Zhang, J. (1999). Comparison of hydrodynamic parameters for a floating breakwater. Proceedings of First International Symposium on Monitoring of Breakwaters, 37-51.
  3. Chen, Y.L. and Hsiao, S.C. (2016). Generation of 3D water waves using mass source wavemaker applied to Navier-Stokes model. Coastal Engineering, 109, 76-95. https://doi.org/10.1016/j.coastaleng.2015.11.011
  4. Fowler, J., Resio, D., Briggs, M. and Pollock, C. (1996). Potential Uses for the Rapidly Installed Breakwater System. Proceedings of 23rd International Conference on Coastal Engineering In Coastal Engineering, 1631-1639.
  5. Higuera, P., Lara, J.L. and Losada, I.J. (2013). Realistic wave generation and active wave absorption for Navier-Stokes models: Application to OpenFOAM(R), Coastal Engineering, 71, 102-118. https://doi.org/10.1016/j.coastaleng.2012.07.002
  6. Higuera, P., Losada, I.J. and Lara, J.L. (2015). Three-dimensional numerical wave generation with moving boundaries. Coastal Engineering, 101, 35-47. https://doi.org/10.1016/j.coastaleng.2015.04.003
  7. Jacobsen, N.G., Fuhrman, D.R. and Fredsoe, J. (2012). A wave generation toolbox for the open-source CFD library: Open-Foam(R). International Journal for Numerical Methods in Fluids, 70(9), 1073-1088. https://doi.org/10.1002/fld.2726
  8. Lee, K.H., Bae, J.H., An, S.W., Kim, D.S. and Bae, K.S. (2016). Numerical Analysis on Wave Characteristics around Submerged Breakwater in Wave and Current Coexisting Field by OLAFOAM. Journal of Korean Society of Coastal and Ocean Engineers, 28(6), 332-349. https://doi.org/10.9765/KSCOE.2016.28.6.332
  9. Lin, P. and Liu, P.L.F. (1999). Internal wave-maker for Navier-Stokes equations models. Journal of Waterway, Port, Coastal, and Ocean Engineering, 125(4), 207-215. https://doi.org/10.1061/(ASCE)0733-950X(1999)125:4(207)
  10. Willmott, C.J., Robeson, S.M. and Matsuura, K. (2012). A refined index of model performance. International Journal of Climatology, 32(13), 2088-2094. https://doi.org/10.1002/joc.2419