References
- Izumi, O., Intermetallics, Chap. 4, pp. 54, Sangyotosho, Tokyo, Japan, 1990. (ISBN 4-7828-3533-7)
- Materials Sci. Soc. of JPN, Intermetallic Compounds for Materials, Chap. 3, pp. 88, Shokabo, Tokyo, Japan, 1995. (ISBN 4-7853-6714-8)
- Salehi, M., karimzado, F., Tahvilian, A., "Formation of TiNi Intermetallic coatings on carbon tool steel by a duplex process", Surface and Coatings Technology, Vol. 148, pp. 55-60, 2000.
- Lee, H.-Y., Ikenaga, A., Kim, S.-H., Kim, K.-B., "The effects of induction heating rate on properties of Ni-Al based intermetallic compound layer coated on ductile cast iron by combustion synthesis", Intermetallics, Vol. 15, pp. 1050-1055, 2007. https://doi.org/10.1016/j.intermet.2006.12.007
- Lee, H.-Y. Kim, T.-J., Cho, Y-J., "Effects of induction heating conditions on ni-al based intermetallic compound coating", Kor. J. Met. & Mater., Vol. 48, No. 2, pp. 141-147, 2010. https://doi.org/10.3365/KJMM.2010.48.02.141
- Lee, H.-Y., Roe, J.-K., Ikenaga, A., "Sliding wear properties for Ni-Al based intermetallic compound layer coated on ductile cast iron by combustion synthesis", Wear, Vol. 260, pp. 83-89, 2006. https://doi.org/10.1016/j.wear.2004.12.033
- Lee, H.-Y., "Analysis of wear properties for ni3al layer coated on ferrous materials by diffusion treatment after combustion synthesis at low temperature", J. Korean Soc. Tribol. Lubr. Eng., Vol. 25, pp. 7-12, 2009.
- Okamoto, A., Ikenaga, A., Yoshimoto, T., Hirose, Y., Lee, H.-Y., "Effects of silicon addition on nickel-aluminide surface coatings through combustion synthesis", J. of Jpn. Foundrymens Society, Vol. 77, pp. 744-751, 2005.
- Kimata, T., Uenish, K., Ikenaga, A., Kobayashi, K., "Enhanced densification of combustion synthesized Ni-Al intermetallic compound by si addition", Intermetallics, Vol. 11, pp. 947-952, 2003. https://doi.org/10.1016/S0966-9795(03)00120-1
- Lee, H.-Y., Cho, Y-J., Kim, T-J., Bang, H-J., "The effect of ball-milling of elemental powders on ni-al based intermetallic coatings using the heat of molten cast iron", Kor. J. Met. & Mater. Vol. 50, No. 1, pp. 28-33, 2012. https://doi.org/10.3365/KJMM.2012.50.1.028
- Lee, H.-Y., "The effect of ball-milling energy on combustion synthesis coating of Cu-Al-Ni based Intermetallics", J. KSTLE, Vol. 27, No. 1, pp. 1-6, 2011.
- Sanchez, C., Ferriere, Bautista A., Rodriquez, G. P., Lopez-Almodovar, M., Barba, A., Sierra, C., Vazquez, A. J., "NiAl intermetallic coatings elaborated by solar assisted SHS process", Intermetallics, Vol. 14, pp. 1270-1275, 2006. https://doi.org/10.1016/j.intermet.2005.11.022
- Van Dyck, S., Delaey, L., Froyen, L., buekenhout, L., "Reactive powder metallurgy of Ni3Si-based alloys", Intermetallics, Vol. 3, pp. 309-314, 1995. https://doi.org/10.1016/0966-9795(95)97291-8
- Lee, H.-Y., "A Study for Ni-Al based Intermetallics coating onto aluminum substrate by induction heating", J. of the KSTLE, Vol. 28, No. 2. pp. 56-61, 2012.
- Morsi, K., "Reaction synthesis processing of Ni-Al intermetallic materials", Mater. Sci. Eng., No. A299, pp. 1-15, 2001.