DOI QR코드

DOI QR Code

Performance-based seismic design of eccentrically braced steel frames using target drift and failure mode

  • Li, Shen (School of Civil Engineering and architecture, Xi'an University of Technology) ;
  • Tian, Jian-bo (School of Civil Engineering and architecture, Xi'an University of Technology) ;
  • Liu, Yun-he (School of Civil Engineering and architecture, Xi'an University of Technology)
  • 투고 : 2017.04.11
  • 심사 : 2017.12.08
  • 발행 : 2017.11.25

초록

When eccentrically braced steel frames (EBFs) are in the desired failure mode, links yield at each layer and column bases appear plastically hinged. Traditional design methods cannot accurately predict the inelastic behavior of structures owing to the use of capacity-based design theory. This paper proposes the use of performance-based seismic design (PBSD) method for planning eccentrically braced frames. PBSD can predict and control inelastic deformation of structures by target drift and failure mode. In buildings designed via this process, all links dissipate energy in the rare event of an earthquake, while other members remain in elastic state, and as the story drift is uniform along the structure height, weak layers will be avoided. In this condition, eccentrically braced frames may be more easily rehabilitated after the effects of an earthquake. The effectiveness of the proposed method is illustrated through a sample case study of ten-story K-type EBFs and Y- type EBFs buildings, and is validated by pushover analysis and dynamic analysis. The ultimate state of frames designed by the proposed method will fail in the desired failure mode. That is, inelastic deformation of structure mainly occurs in links; each layer of links involved dissipates energy, and weak layers do not exist in the structure. The PBSD method can provide a reference for structural design of eccentrically braced steel frames.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. AISC341-10 (2010), Seismic Provision for Structure Steel Buildings, American Institute of Steel Construction, Chicago, USA.
  2. Akiyama, H. (1985), Earthquake-Resistant Limit-State Design for Buildings, University of Tokyo Press, Tokyo, Japan.
  3. Ashikov, A., Clifton, G.C. and Belev, B. (2016), "Finite element analysis of eccentrically braced frames with a new type of bolted replaceable active link", New Zealand Society for Earthquake Engineering 2016 Conference.
  4. Azad, S.K. and Topkaya, C. (2017), "A review of research on steel eccentrically braced frames", J. Constr. Steel Res., 128(1), 53-73. https://doi.org/10.1016/j.jcsr.2016.07.032
  5. Berman, J.W. and Bruneau, M. (2007), "Experimental and analytical investigation of tubular links for eccentrically braced frames", Eng. Struct., 29(8), 1929-1938. https://doi.org/10.1016/j.engstruct.2006.10.012
  6. Bosco, M. and Rossi, P.P. (2009), "Seismic behaviour of eccentrically braced frames", Eng. Struct., 31(3), 664-674. https://doi.org/10.1016/j.engstruct.2008.11.002
  7. Chao, S.H., Goel, S.C. and Lee, S.S. (2007), "A seismic design lateral force distribution based on inelastic state of structures", Earthq. Spectra, 23(3), 547-569. https://doi.org/10.1193/1.2753549
  8. Daneshmand, A. and Hashemi, B.H. (2012), "Performance of intermediate and long links in eccentrically braced frames", J. Constr. Steel Res., 70(3), 167-176. https://doi.org/10.1016/j.jcsr.2011.10.011
  9. Engelhardt, M.D. and Popov, E.P. (1992), "Experimental performance of long links in eccentrically braced frames", J. Struct. Eng., 118(11), 3067-3088. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:11(3067)
  10. Foutch, D.A. (1989), "Seismic behavior of eccentrically braced steel building", J. Struct. Eng., 115(8), 1857-1876. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:8(1857)
  11. GB50011-2010 (2010), Code for seismic design of buildings, China Architecture Industry Press, Beijing, China. (in Chinese)
  12. Hjelmstad, K.D. and Popov, E.P. (1983), "Cyclic behavior and design of link beams", J. Struct. Eng., 109(10), 2387-2403. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:10(2387)
  13. Hjelmstad, K.D. and Popov, E.P. (1984), "Characteristics of eccentrically braced frames", J. Struct. Eng., 110(2), 340-353. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:2(340)
  14. Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the First World Conference on Earthquake Engineering, Earthquake Engineering Research Institute, Berkeley, CA.
  15. Housner, G.W. (1960), "The plastic failure of frames during earthquakes", Proceedings of the Second World Conference on Earthquake Engineering, Internationa Association of Earthquake Engineering ,Tokyo.
  16. Kasai, K. and Popov, E.P. (1986), "General behavior of wf steel shear link beams", J. Struct. Eng., 112(2), 362-382. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:2(362)
  17. Lee, S.S., Goel, S.C. and Chao, S.H. (2004), "Performance-based design of steel moment frames using target drift and yield mechanism", Ph.D. Dissertation.
  18. Lee, S.S., Goel, S.C. and Stojadinovi, B. (2012), "Toward performance-based seismic design of structures", Earthq. Spectra, 15(3), 435-461. https://doi.org/10.1193/1.1586052
  19. Lee, S.S., Goel, S.C. and Stojadinovic, B. (1998), "Drift and yield mechanism based seismic design and upgrading of steel moment frames", Ph.D. Dissertation.
  20. Lian, M., Su, M.Z. and Guo, Y. (2015), "Seismic performance of eccentrically braced frames with high strength steel combination", Steel Compos. Struct., 18(6), 1517-1539. https://doi.org/10.12989/scs.2015.18.6.1517
  21. Liao, W.C. (2010), "Performance-based plastic design of earthquake resistant reinforced concrete moment frames", Ph.D. Dissertation, The University of Michigan, Michigan.
  22. Malley, J.O. and Popov, E.P. (1984), "Shear links in eccentrically braced frames", J. Struct. Eng., 110(9), 2275-2295. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:9(2275)
  23. Mansour, N., Christopoulos, C. and Tremblay, R. (2011), "Experimental validation of replaceable shear links for eccentrically braced steel frames", J. Struct. Eng., 137(10), 1141-1152. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000350
  24. Miranda, E. and Bertero, V.V. (1994), "Evaluation of strength reduction factors for earthquake-resistant design", Earthq. Spectra, 10(2), 357-379. https://doi.org/10.1193/1.1585778
  25. Newmark, N.M. and Hall, W.J. (1982), Earthquake Spectra and Design, Earthquake Engineering Research Institute, El Cerrito, CA.
  26. Shen, Y., Christopoulos, C., Mansour, N. and Tremblay, R. (2011), "Seismic design and performance of steel moment-resisting frames with nonlinear replaceable links", J. Struct. Eng., 137(10), 1107-1117. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000359
  27. Speicher, M.S. and Iii, J.L.H. (2016), "Collapse prevention seismic performance assessment of new eccentrically braced frames using ASCE 41", Eng. Struct., 117(6), 344-357. https://doi.org/10.1016/j.engstruct.2016.02.018
  28. Uang, C.M. and Bertero, V.V. (1988), "Use of energy as a design criterion in earthquake-resistant design", Research Report No. UCB/EERC-88/18, Earthquake Engineering Research Center, University of California, Berkeley, CA.
  29. Wang, F., Su, M.Z., Hong, M., Guo, Y. and Li, S. (2016), "Cyclic behaviour of y-shaped eccentrically braced frames fabricated with high-strength steel composite", J. Constr. Steel Res., 120(2), 176-187. https://doi.org/10.1016/j.jcsr.2016.01.007

피인용 문헌

  1. Experimental Research and Theoretical Analysis of the Seismic Behavior of Prefabricated Semirigid Steel Frame with X-Shaped Braces vol.2019, pp.None, 2017, https://doi.org/10.1155/2019/6857683