참고문헌
- P. Viklund, Superheater corrosion in biomass and waste fired boilers: characterisation, causes and prevention of chlorine-induced corrosion, (2013) (Doctoral dissertation, KTH Royal Institute of Technology).
- D. B. Lee, High-temperature Corrosion by Chlorides in Biomass-fired Plants, J. Kor. Inst. Surf. Eng., 49 (2016) 14-19. https://doi.org/10.5695/JKISE.2016.49.1.14
- G. Bai, J. Li, R. Hu, Z. Tang, X. Xue, H. Fu, Effect of temperature on tensile behavior of Ni- Cr-W based superalloy, Mater. Sci. Eng. A., 528 (2011) 1974-1978. https://doi.org/10.1016/j.msea.2010.11.053
- F. Mechehoud, N. E. Benaioun, N. E. Hakiki, A. Khelil, L. Simon, J. L. Bubendorff, Thermally oxidized Inconel 600 and 690 nickel-based alloys characterizations by combination of global photoelectrochemistry and local near-field microscopy techniques (STM, STS, AFM, SKPFM), Appl. Surf. Sci., 433 (2018) 66-75. https://doi.org/10.1016/j.apsusc.2017.10.094
- H. Y. Zhang, Y. H. Lu, M. Ma, J. Li, Effect of precipitated carbides on the fretting wear behavior of Inconel 600 alloy, Wear., 315 (2014) 58-67. https://doi.org/10.1016/j.wear.2014.03.012
- H. Sahlaoui, H. Sidhom, J. Philibert, Prediction of chromium depleted-zone evolution during aging of Ni-Cr-Fe alloys, Acta Mater., 50 (2002) 1383- 1392. https://doi.org/10.1016/S1359-6454(01)00444-X
- C. Stawstrom, M. Hillert, Improved depleted-zone theory of intergranular corrosion of 18-8 stainless steel, J. Iron. Steel. Inst., 207 (1969) 77-85.
- J. D. Wang, D. Gan, Effects of grain boundary carbides on the mechanical properties of Inconel 600, Mater. Chem. Phys., 70 (2001) 124-128. https://doi.org/10.1016/S0254-0584(00)00484-3
- Y. Guo, B. Wang, S. Hou, Aging precipitation behavior and mechanical properties of inconel 617 superalloy, Acta Metall. Sin., 26 (2013) 307-312. https://doi.org/10.1007/s40195-012-0249-3
- X. Bai, J. Pan, G. Chen, J. Liu, J. Wang, T. Zhang, and W. Tang, Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel, Mater. Sci. and Tech., 30 (2014) 205-210. https://doi.org/10.1179/1743284713Y.0000000347
- A. Iseda, H. Okada, H. A. Semba and M. Igarashi, Long term creep properties and microstructure of SUPER304H, TP347HFG and HR3C for A-USC boilers, Energy Mater., 2 (2007) 199-206. https://doi.org/10.1179/174892408X382860
- J. J. Kai, C. H. Tsai, T. A. Huang, M. N. Liu, The effects of heat treatment on the sensitization and SCC behavior of INCONEL 600 alloy, Metall. Trans. A., 20 (1989) 1077-1088. https://doi.org/10.1007/BF02650143
- A. Gunen, E. Kanca, Microstructure and Mechanical Properties of Borided Inconel 625 Superalloy, Materia (Rio Janeiro)., 22 (2017).
- R. C. Scarberry, S. C. Pearman, J. R. Crum, Precipitation reactions in Inconel Alloy 600 and their effect on corrosion behavior. Corros. Sci., 32 (1976) 401-406. https://doi.org/10.5006/0010-9312-32.10.401
- W. Y. Maeng, T. W. Nam, The Effects of Heat Treatment on Intergranular Carbide Precipitations and Intergranular Stress Corrosion Cracking of Inconel alloy, J. Korean Soc. Heat Treat., 10 (1997) 219-231.
- E. L. Hall, C. L. Briant, The microstructural response of mill-annealed and solution-annealed INCONEL 600 to heat treatment, Metall. Mater. Trans. A., 48, 16 (1985) 1225-1236.
- Y. F. Yin, R. G. Faulkner, Model predictions of grain boundary chromium depletion in Inconel 690, Corros. Sci., 49 (2007) 2177-2197. https://doi.org/10.1016/j.corsci.2006.10.022
- J. M. Larson, Carbide morphology in p/m IN-792. Metall. Trans. A., 7 (1976) 1497-1502. https://doi.org/10.1007/BF02656391