DOI QR코드

DOI QR Code

Investigations of H-Darrieus rotors for different blade parameters at low wind speeds

  • Sengupta, Anal R. (Department of Mechanical Engineering, GIMT Guwahati) ;
  • Biswas, Agnimitra (Department of Mechanical Engineering, NIT Silchar) ;
  • Gupta, Rajat (Department of Mechanical Engineering, NIT Silchar)
  • 투고 : 2017.01.04
  • 심사 : 2017.12.05
  • 발행 : 2017.12.25

초록

Studies of unsymmetrical blade H-Darrieus rotors at low wind speeds in terms of starting time, static torque, and power performances for different blade parameters: thickness-to-chord (t/c), camber position, and solidity are scarce. However these are required for knowing insights of rotor performances to obtain some design guidelines for the selection of these rotors. Here, an attempt is made to quantify the effects of these blade parameters on the performances of three different H-Darrieus rotors at various low wind streams. Different blade profiles, namely S815, EN0005 (both unsymmetrical), and NACA 0018 (symmetrical blade for comparison) are considered. The rotors are investigated rigorously in a centrifugal blower apparatus. Firstly the dynamic and static performances of the rotors are evaluated to determine the best performing rotor and their optimum solidity. Generalised performance equations are developed based on selected blade parameters which are validated for the unsymmetrical rotors. Further, the starting time is quantified with respect to the rotor inertia to determine the suitable range of inertia that helps the unsymmetrical blade rotor to self-start earlier than the symmetrical one. This study can work as a benchmark for the selection of optimum blade parameters while designing an unsymmetrical blade rotor at low wind speeds.

키워드

참고문헌

  1. Baker, J.R. (1983), "Features to aid or enable self-starting of fixed pitch low solidity vertical axis wind turbines", J. Wind Eng. Ind. Aerod., 15, 369-380. https://doi.org/10.1016/0167-6105(83)90206-4
  2. Batista, N.C., Melicio , R., Matias, J.C.O. and Catalao, J.P.S. (2011), "New blade profile for Darrieus wind turbines capable to self-start", IET Conference on Renewable Power Generation, 1-5.
  3. Bhatta, P., Paluszek, M.A. and Mueller, J.B. (2008)," Individual blade pitch and camber control for vertical axis wind turbines", WWEC2008, Kingston, Canada.
  4. Bhuyan, S. and Biswas, A. (2014), "Investigations on self-starting and performance characteristics of simple H and hybrid H-Savonius vertical axis wind rotors", Energ. Convers.Manag., 87, 859-67. https://doi.org/10.1016/j.enconman.2014.07.056
  5. Biswas, A. and Gupta, R. (2014), "Unsteady aerodynamics of a twist bladed H-Darrieus rotor in low Reynolds number flow", J. Renew. Sust. Energ., 6(3), 033108. https://doi.org/10.1063/1.4878995
  6. Danao, L.A., Qin, N. and Howell, R. (2012), "A numerical study of blade thickness and camber effects on vertical axis wind turbines", J. Power Energ., 226(7), 867-881. https://doi.org/10.1177/0957650912454403
  7. DeCoste, J., Smith, A., White, D., Berkvens, D. and Crawford, J. (2004), "Self-starting Darrieus wind turbine, design project mech", 4020. Dalhousie University, Hallifax, Canada,
  8. Dereng, V.G. (1981), Fixed geometry self-starting transverse axis wind turbine, United States Patent 4264279. Available at: http://www.freepatentsonline.com/4264279.html [accessed on 29.05.15].
  9. Deshpande, P. and Li, X. (2013), "Numerical study of giromill-type wind turbines with symmetrical and non-symmetrical airfoils", Eur. Int. J. Sci. Technol., 2(8), 195-208.
  10. Dominy, R., Lunt, P., Bickerdyke, A. and Dominy, J. (2007), "Self-starting capability of a Darrieus turbine", Proc. Of the I Mech E part A: J. Power Energy, 221(1), 111-120. https://doi.org/10.1243/09576509JPE340
  11. Errikson, S., Bernhoff, H. and Leijon, M. (2008), "Evaluation of different turbine concepts for wind power", Renew. Sust. Energ.Rev., 12(5), 1419-1434. https://doi.org/10.1016/j.rser.2006.05.017
  12. Gupta, R., Biswas, A. and Sharma, K.K. (2008), "Comparative study of a three-bucket Savonius rotor with a combined three-bucket Savonius-three-bladed Darrieus rotor", Renew. Energ., 33(9), 1974-1981. https://doi.org/10.1016/j.renene.2007.12.008
  13. Howell, R., Qin, N., Edwards, J. and Durrani, N. (2010), "Wind tunnel and numerical study of a small vertical axis wind turbine", Renew. Energ., 35, 412-422. https://doi.org/10.1016/j.renene.2009.07.025
  14. Kline, S.J. and McClintock, F.A. (1953), "Describing uncertainties in single-sample experiments", Mech. Eng., 75(1), 3-8.
  15. http://www.skf.com/in/products/bearings-units-housings/ball-bearings/principles/friction/power-loss-bearing-te mperature/index.html (Accessed on 11/07/2016).
  16. www.dept.aoe.vt.edu/-lutze/AOE3104/airfoilwings.pdf (Accessed on 02/09/2015).
  17. http://airfoiltools.com/airfoil/details?airfoil=s815-nr (Accessed on 01/09/2015).
  18. Mohamed, M.H. (2013), "Impacts of solidity and hybrid system in small wind turbines performance", Energy, 57, 495-504. https://doi.org/10.1016/j.energy.2013.06.004
  19. Mohamed, M.H. (2012), "Performance investigation of H-rotor Darrieus turbine with new airfoil shapes", Energy, 47(1), 522-530. https://doi.org/10.1016/j.energy.2012.08.044
  20. Paraschivoiu, I., Trifu, O. and Saeed, F. (2009), "H-Darrieus wind turbine with blade pitch control", Int. J. Rotating Machinery, 1-7.
  21. Saeidi, D., Sedaghat, A., Alamdari, P. and Alemrajabi, A.A. (2013), "Aerodynamic design and economical evaluation of site specific small vertical axis wind turbines", Appl. Energ., 101, 765-775. https://doi.org/10.1016/j.apenergy.2012.07.047
  22. Sengupta, A.R., Biswas, A. and Gupta, R. (2016), "Studies of some high solidity symmetrical and unsymmetrical blade H-Darrieus rotors with respect to starting characteristics, dynamic performances and flow physics in low wind streams", Renew. Energy , (93), 536-547. https://doi.org/10.1016/j.renene.2016.03.029
  23. Sengupta, A.R., Biswas, A. and Gupta, R. (2017), "The aerodynamics of high solidity unsymmetrical and symmetrical blade H-Darrieus rotors in low wind speed conditions", J. Renew. Sust. Energ., 9, 043307. https://doi.org/10.1063/1.4999965
  24. Singh, M.A., Biswas, A. and Misra, R.D. (2015), "Investigation of self-starting and high rotor solidity on the performance of a three S1210 blade H-type Darrieus rotor", Renew. Energ., 76, 381-387. https://doi.org/10.1016/j.renene.2014.11.027
  25. Takao, M., Kuma, H., Maeda, T., Kamada, Y., Oki, M. and Minoda A. (2009), "A straight-bladed vertical axis wind turbine with a directed guide vane row-effect of guide vane geometry on the performance", J. Therm. Sci., 18(1), 54-57. https://doi.org/10.1007/s11630-009-0054-0
  26. Tillman, J.P. (2011), "Improvements to vertical axis wind turbine blades to aid in self-starting", Masters Theses. Paper 697, http://thekeep.eiu.edu/theses/697 (Accessed on 02/09/2015).
  27. Zamani, M., Maghrebi, M.J. and Moshizi, S.A. (2016), "Numerical study of airfoil thickness effects on the performance of J-shaped straight blade vertical axis wind turbine", Wind Struct., 22(5), 595-616. https://doi.org/10.12989/was.2016.22.5.595
  28. Zhuga, A.T., Munyaradzi, B. and Shonhiwa, C. (2014), "Design of Alternative Energy Systems: A Self-Starting Vertical Axis Wind Turbine for Stand-Alone Applications (charging batteries)", Proceedings of the 6th International Conference on Appropriate Technology

피인용 문헌

  1. Effects of blade configuration and solidity on starting torque of Darrieus wind turbine vol.32, pp.2, 2017, https://doi.org/10.12989/was.2021.32.2.169