DOI QR코드

DOI QR Code

지능형 최적화 기법 이용한 하이브리드 자기부상 시스템의 설계

Design of Hybrid Magnetic Levitation System using Intellignet Optimization Algorithm

  • Cho, Jae-Hoon (Smart Logistics Technology Institute, Hankyong National University) ;
  • Kim, Yong-Tae (Department of Electrical, Electronic and Control Engineering, Hankyong National University)
  • 투고 : 2017.07.17
  • 심사 : 2017.11.15
  • 발행 : 2017.12.01

초록

In this paper, an optimal design of hybrid magnetic levitation(Maglev) system using intelligent optimization algorithms is proposed. The proposed maglev system adopts hybrid suspension system with permanent-magnet(PM) and electro magnet(EM) to reduce the suspension power loss and the teaching-learning based optimization(TLBO) that can overcome the drawbacks of conventional intelligent optimization algorithm is used. To obtain the mathematical model of hybrid suspension system, the magnetic equivalent circuit including leakage fluxes are used. Also, design restrictions such as cross section areas of PM and EM, the maximum length of PM, magnetic force are considered to choose the optimal parameters by intelligent optimization algorithm. To meet desired suspension power and lower power loss, the multi object function is proposed. To verify the proposed object function and intelligent optimization algorithms, we analyze the performance using the mean value and standard error of 10 simulation results. The simulation results show that the proposed method is more effective than conventional optimization methods.

키워드

참고문헌

  1. J. H. Cho, and Y. T. Kim, "Design of Levitation Controller with Optimal Fuzzy PID Controller for Magnetic Levitation System," Journal of Korean Institute of Intelligent Systems, vol. 24, no. 3, pp. 279-284, 2014. https://doi.org/10.5391/JKIIS.2014.24.3.279
  2. S. J. Kim, W. Y. Kim, J. M. Lee and Y. C. Bae, "Modeling of Flux Leakage in a Magnetic Circuit with Permanent Magnet," Korean Society for Noise and Vibration Engineering, vol. 21, no. 2, pp. 99-105, 2011. https://doi.org/10.5050/KSNVE.2011.21.2.099
  3. J. Zou, M. Zhao, Q. Wang, J. Zou, and G. Wu, "Development and analysis of tubular transverse flux machine with permanent-magnet excitation," IEEE Trans. Ind. Electron., vol. 59, no. 5, pp. 2198-2207, May 2012. https://doi.org/10.1109/TIE.2011.2157297
  4. L. Qaseer, S. Purushothaman, and F. de Leon, "Closedform analysis of squirrel-cage induction motors with anisotropic modeling of stator and rotor," IEEE Trans. Energy Convers., vol. 27, no. 3, pp. 553-560, Sep. 2012. https://doi.org/10.1109/TEC.2012.2193128
  5. L. Jian, G. Xu, C. C. Mi, K. T. Chau, and C. C. Chan, "Analytical method for magnetic field calculation in a low-speed permanent-magnet harmonic machine," IEEE Trans. Energy Convers., vol. 26, no. 3, pp. 862-870, Sep. 2011. https://doi.org/10.1109/TEC.2011.2140373
  6. S. Mohammadi, M. Mirsalim, and S. Vaez-Zadeh, "Nonlinear modeling of eddy-current couplers," IEEE Trans. Energy Convers., vol. 22, no. 1, pp. 224-231, Mar. 2014.
  7. S. Mohammadi, M. Mirsalim, S. Vaez-Zadeh, and H. Talebi, "Analytical modeling and analysis of axial-flux interior permanent-magnet couplers," IEEE Trans. Ind. Electron., vol. 60, no. 11, pp. 5940-5947, Nov. 2014.
  8. S.Mohammadi andM.Mirsalim, "Analytical design framework for torque and back-EMF optimization, and inductance calculation in double-rotor radial-flux aircored permanent-magnet machines," IEEE Trans. Magn., vol. 50, no. 1, Jan. 2014.
  9. C. Y. Lee, J. M. Jo, Y. J. Han, Y. D. Chung, Y. S. Yoon, S. Choi, Y. J. Hwang, H. C. Jo, J. Y. Jang, and T. K. Ko, "Design, fabrication, and operating test of the prototype HTS electromagnet for EMS-based maglev," IEEE Trans. Appl. Supercond., vol. 22, no. 3, Mar. 2012.
  10. D. H. N. Dias, G. G. Sotelo, E. F. Rodriguez, R. de Andrade, and R. M. Stephan, "Emulation of a full scale maglev vehicle behavior under operational conditions," IEEE Trans. Appl. Supercond., vol. 23, no. 3, Jun. 2013.
  11. Z. Zhang, L. She, L. Zhang, C. Shang, and W. Chang, "Structural optimal design of a permanent-electromagnetic suspension magnet for middle-low-speed maglev trains," IET Elect. Syst. Transp., vol. 1, no. 2, pp. 61-68, Apr. 2011. https://doi.org/10.1049/iet-est.2010.0018
  12. U. Hasirci, A. Balikci, Z. Zabar, and L. Birenbaum, "Experimental performance investigation of a novel magnetic levitation system," IEEE Trans. Plasma Sci., vol. 41, no. 5, pp. 1-6, May 2013. https://doi.org/10.1109/TPS.2013.2259871
  13. Safaei, Farhad, et al. "Characteristics Optimization of the Maglev Train Hybrid Suspension System Using Genetic Algorithm." IEEE Transactions on Energy Conversion, vol. 30, no.3, pp. 1163-1170, 2015. https://doi.org/10.1109/TEC.2014.2388155
  14. J. H. Cho, and Y. T. Kim, "Design of the Electromagnet of Maglev using Optimization Algorithm Based on Bacterial Survival Strategies," The Korean Institute of Electrical Engineers, vol. 65, no. 6, pp. 1045-1051, 2016. https://doi.org/10.5370/KIEE.2016.65.6.1045
  15. C. H. Kim, H. W. Cho, J. M. Lee, and H. S. Han, "Zero-power control of magnetic levitation vehicles with permanent magnets," in Proc. IEEE Int. Conf. Control Autom. Syst., pp. 732-735, Oct. 2010.
  16. T. Onuki and Y. Toda, "Optimal design of hybrid magnet in maglev system with both permanent and electro magnets," IEEE Trans. Magn., vol. 9, no. 2, pp. 1783-1786, 1993.
  17. Hanselman, Duane C. Brushless permanent magnet motor design. The Writers' Collective, 2003.
  18. J. H. Cho, and Y. T. Kim, "Optimal Design of Magnetic Levitation Controller Using Advanced Teaching-Learning Based Optimization."The Transactions of the Korean Institute of Electrical Engineers, Vol. 64, No. 1, pp. 90- 98, 2015. https://doi.org/10.5370/KIEE.2015.64.1.090
  19. R. V. Rao, V. J. Savsani, and D. P. Vakharia., "Teachinglearning- based optimization: A novel method for constrained mechanical design optimization problems", Computer-Aided Design, vol. 43, pp. 303-315, 2011. https://doi.org/10.1016/j.cad.2010.12.015
  20. R. V. Rao and Vivek Patel., "Multi-objective optimization of heat exchangers using a modified teachinglearning- based optimization algorithm", Applied Mathematical Modelling, vol. 37, no. 3, pp. 1147-1162, 2013. https://doi.org/10.1016/j.apm.2012.03.043