참고문헌
- E.-M. An, S.-B. Cho, S. Lee, H. Miyauchi and G.-Y. Kim, "Compressive strength properties of geopolymer using power plant bottom ash and NaOH activator", Kor. J. Mater. Res. 22 (2012) 71. https://doi.org/10.3740/MRSK.2012.22.2.71
- Y.-K. Cho, G.-D. Moon, J.-M. La and S.-H. Jung, "Effect of Curing Conditions on the Strength of Fly-Ash based geopolymer", J. Kor. Conc. Instit. 26 (2014) 449. https://doi.org/10.4334/JKCI.2014.26.4.449
- J. Davidovits, "Geopolymers: inorganic polymeric new materials", J. Therm. Analysis 37 (1991) 1633. https://doi.org/10.1007/BF01912193
- P. Duxon and J.L. Provis, "Designing precursors for geopolymer cements", J. Amer. Cer. Soc. 91 (2008) 3864. https://doi.org/10.1111/j.1551-2916.2008.02787.x
- M. Lizcano, A. Gonzalez, S. Basu, K. Lozano and M. Radovic, "Effects of water content and chemical composition on structural properties of alkaline activated metakaolin-based geopolymers", J. Amer. Cer. Soc. 95 (2012) 2169. https://doi.org/10.1111/j.1551-2916.2012.05184.x
- S. Suber, "Influence of Aggregate on the Microstructure of Geopolymer" (Curtin Univ. of Tech., Perth, 2004) 1.
- Q. Zhao, B. Nair, T. Rahimian and P. Balaguru, "Novel geopolymer based composites with enhanced ductility", J. Mater. Sci. 42 (2007) 3131. https://doi.org/10.1007/s10853-006-0527-4
- A.D. Hounsi, G.L. Nana, G. Djeteli, P. Blanchart, D. Alowanou, P. Kpelou, K. Napo, G. Tchangbedji and M. Praisler, "How does Na, K alkali metal concentration change the early age structural characteristic of kaolinbased geopolymers", Cer. Int. 40 (2014) 8953. https://doi.org/10.1016/j.ceramint.2014.02.052
- P. Duxon, A. Fernandez-Jimenez, J.L. Provis, G.C. Lukey, A. Palomo and J.S.J. van Deventer, "Geopolymer technology: The current state of the art", J. Mater. Sci. 42 (2007) 2917. https://doi.org/10.1007/s10853-006-0637-z
- J.G.S. van Jaarsveld and J.S.J. van Deventer, "Effect of the alkali metal activator on the properties of fly ashbased geopolymers", Ind. Eng. Chem. Res. 38 (1999) 3932. https://doi.org/10.1021/ie980804b
- M. Sarkar, K. Dana and S. Das, "Microstructural and phase evolution in metakaolin geopolymers with different activators and added aluminosilicate fillers", J. Molec. Struc. 1098 (2015) 110. https://doi.org/10.1016/j.molstruc.2015.05.046
- K. Neupane, R. Sriravindrarajah, D. Baweja and D. Chalmers, "Effect of curing on the compressive strength development in structural grades of geocement concrete", Const. Build. Mater. 94 (2015) 241. https://doi.org/10.1016/j.conbuildmat.2015.07.005
- A. Hajimohammadi, T. Ngo and P. Mendis, "How does aluminium foaming agent impact the geopolymer formation mechanism?", Cem. Conc. Comp. 80 (2017) 227.
- M.Y.J. Liu, U.J. Alengaram, M. Santhanam, M.Z. Jumaat and K.-H. Mo, "Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete", Const. Build. Mater. 120 (2016) 112. https://doi.org/10.1016/j.conbuildmat.2016.05.076
- T. Bakharev, "Geopolymeric materials prepared using Class F fly ash and elevated temperature curing", Cem. Conc. Res. 35 (2005) 1224. https://doi.org/10.1016/j.cemconres.2004.06.031
- P. Duan, C. Yan and W. Zhou, "Influence of partial replacement of fly ash by metakaolin on mechanical properties and microstructure of fly ash geopolymer paste exposed to sulfate attack", Cer. Int. 42 (2016) 3504. https://doi.org/10.1016/j.ceramint.2015.10.154
- L.N. Assi, E. Deaver, M.K. EIBatanouny and P. Ziehl, "Investigation of early compressive strength of fly ashbased geopolymer concrete", Const. Build. Mater. 112 (2016) 807. https://doi.org/10.1016/j.conbuildmat.2016.03.008
- Concrete Standard Specification of Korea, Ministry of Land, Infrastructure and Transport (2016).
- Q. Wan, F. Rao, S. Song, R.E. Garcia, R.M. Estrella, C.L. Patino and Y. Zhang, "Geopolymerization reaction, microstructure and simulation of metakaolin-based geopolymers at extended Si/Al ratios", Cem. Conc. Comp. 79 (2017) 45. https://doi.org/10.1016/j.cemconcomp.2017.01.014
- S. Lee, E.-M. An and Y.-H. Cho, "Effect of foaming agent content on the apparent density and compressive strength of lightweight geopolymers", J. Rec. Const. Resources 4 (2016) 363.
- L. Zhang, F. Zhang, M. Liu and X. Hu, "Novel sustainable geopolymer based syntactic foams: An eco-friendly alternative to polymer based syntactic foams", Chem. Eng. J. 313 (2017) 74. https://doi.org/10.1016/j.cej.2016.12.046
- S. Delair, E. Prud'homme, C. Peyratout, A. Smith, P. Michaud, L. Eloy, E. Joussein and S. Rossignol, "Durability of inorganic foam in solution: The role of alkali elements in the geopolymer network", Corr. Sci. 59 (2012) 213. https://doi.org/10.1016/j.corsci.2012.03.002
- J.T. Kim, D.S. Seo, G.J. Kim and J.K. Lee, "Influence of alkaline-activator content on the compressive strength of aluminosilicate-based geopolymer", J. Kor. Cer. Soc. 47 (2010) 216. https://doi.org/10.4191/KCERS.2010.47.3.216
- N.-K. Lee, H.R. Khalid and H.K. Lee, "Synthesis of mesoporous geopolymers containing zeolite phases by a hydrothermal treatment", Mic. Meso. Mater. 229 (2016) 22. https://doi.org/10.1016/j.micromeso.2016.04.016
- H.M. Khater, "Effect of silica fume on the characterization of the geopolymer materials", Int. J. Adv. Struc. Eng. 12 (2013) 5.