DOI QR코드

DOI QR Code

Advances and challenges in impedance-based structural health monitoring

  • Huynh, Thanh-Canh (Department of Ocean Engineering, Pukyong National University) ;
  • Dang, Ngoc-Loi (Department of Ocean Engineering, Pukyong National University) ;
  • Kim, Jeong-Tae (Department of Ocean Engineering, Pukyong National University)
  • 투고 : 2017.11.15
  • 심사 : 2017.12.04
  • 발행 : 2017.12.25

초록

Impedance-based damage detection method has been known as an innovative tool with various successful implementations for structural health monitoring of civil structures. To monitor the local critical area of a structure, the impedance-based method utilizes the high-frequency impedance responses sensed by piezoelectric sensors as the local dynamic features. In this paper, current advances and future challenges of the impedance-based structural health monitoring are presented. Firstly, theoretical background of the impedance-based method is outlined. Next, an overview is given to recent advances in the wireless impedance sensor nodes, the interfacial impedance sensing devices, and the temperature-effect compensation algorithms. Various research works on these topics are reviewed to share up-to-date information on research activities and implementations of the impedance-based technique. Finally, future research challenges of the technique are discussed including the applicability of wireless sensing technology, the predetermination of effective frequency bands, the sensing region of impedance responses, the robust compensation of noise and temperature effects, the quantification of damage severity, and long-term durability of sensors.

키워드

과제정보

연구 과제 주관 기관 : Pukyong National University

참고문헌

  1. Analog Devices (2010), "Datasheet of AD5933", http://www.analog.com
  2. Annamdas, V.G.M., (2012), "Facts of piezo impedance technique in crack propagation studies for an engineering structure", Int. J. Aerosp. Sci., 1(2), 8-15.
  3. Ayres, J.W., Lalande, F., Chaudhry, Z. and Rogers, C.A. (1998), "Qualitative impedance-based health monitoring of civil infrastructures", Smart Mater. Struct., 7, 599-605. https://doi.org/10.1088/0964-1726/7/5/004
  4. Balageas, D., Fritzen, C.P. and Gueemes, A, (2006), "Structural health monitoring", Wiley-ISTE.
  5. Bhalla, S. and Soh, C.K. (2004), "Electromechanical impedance modeling for adhesively bonded piezotransducers", J. Intel. Mat. Syst. Str., 15(12), 955-972. https://doi.org/10.1177/1045389X04046309
  6. Bilgunde, P. and Bond, L.J. (2017), "Temperature dependence of electromechanical impedance based bondline integrity monitoring", Proceeding of SPIE, 10170, 1-11.
  7. Burgoyne, C.J. and Scantlebury, R.C. (2008), "Lessons learned from the bridge collapse in Palau", Proceeding of the Institution of Civil Engineers: Civil Engineering, 161, 28-34. https://doi.org/10.1680/cien.2008.161.6.28
  8. Chaudhry, Z., Joseph, T., Sun, F. and Rogers, C. (1995), "Local-area health monitoring of aircraft via piezoelectric actuator/sensor patches", Smart Structures and Integrated Systems, Proceedings of the SPIE, 2443, San Diego, CA.
  9. Fabricio G.B., Danilo E.B., Vinicius A.D.A. and Jose A.C.U. (2014), "An experimental study on the effect of temperature on piezoelectric sensors for impedance-based structural health monitoring", Sensors, 14, 1208-1227. https://doi.org/10.3390/s140101208
  10. Giurgiutiu, V. (2014), Structural health monitoring with piezoelectric wafer active sensors, 2nd Ed., Academic Press.
  11. Giurgiutiu, V. and Zagrai, A. (2002), "Embedded self-sensing piezoelectric active sensors for on-line structural identification", J. Vib. Acoust., 124, 116-125. https://doi.org/10.1115/1.1421056
  12. Giurgiutiu, V. and Zagrai, A. (2005), "Damage detection in thin plates and aerospace structures with the electro-mechanical impedance method", Struct. Health Monit., 4(2), 99-118. https://doi.org/10.1177/1475921705049752
  13. Ho, D.D, Ngo, T.M. and Kim, J.T. (2014), "Impedance-based damage monitoring of steel column connection: numerical simulation", Struct. Monit. Maint., 1(3), 339-356. https://doi.org/10.12989/SMM.2014.1.3.339
  14. Ho, D.D., Lee, P.Y., Nguyen, K.D., Hong, D.S., Lee, S.Y., Kim, J.T., Shin, S.W., Yun, C.B. and Shinozuka, M. (2012), "Solar-powered multi-scale sensor node on imote2 platform for hybrid SHM in cable-stayed bridge", Smart Struct. Syst., 9(2), 145-164. https://doi.org/10.12989/sss.2012.9.2.145
  15. Hooker, M.W. (1998), "Properties of PZT-based piezoelectric ceramics between -150 and $250^{\circ}C$", Technical Report NASA/CR-1998-208708, NASA, USA
  16. Hou, J., Jankowski, L. and Ou, J. (2014), "Structural health monitoring based on combined structural global and local frequencies", Math. Problem. Eng., 1-13.
  17. Hu, X., Zhu, H. and Wang, D. (2014), "A study of concrete slab damage detection based on the electromechanical impedance method", Sensors, 14, 19897-19909. https://doi.org/10.3390/s141019897
  18. Hu, Y. and Yang, T. (2007), "Wave propagation modeling of the PZT sensing region for structural health monitoring", Smart Mater. Struct., 16, 706-716. https://doi.org/10.1088/0964-1726/16/3/018
  19. Huynh, T.C. (2017), "Wireless impedance-based structural health monitoring of civil structures using smart PZT interface technique", PhD Dissertation, Pukyong National University, Korea.
  20. Huynh, T.C. and Kim, J.T. (2014), "Impedance-based cable force monitoring in tendon-anchorage using portable PZT-interface technique", Math. Problem. Eng., 1-11.
  21. Huynh, T.C. and Kim, J.T. (2016), "Compensation of temperature effect on impedance responses of PZT interface for prestress-loss monitoring in PSC girders", Smart Struct. Syst., 17(6), 881-901. https://doi.org/10.12989/sss.2016.17.6.881
  22. Huynh, T.C. and Kim, J.T. (2017a), "Quantification of temperature effect on impedance monitoring via PZT interface for prestressed tendon anchorage", Smart Mater. Struct., 26(12), 1-19.
  23. Huynh, T.C. and Kim, J.T. (2017b), "Quantitative damage identification in tendon anchorage via PZT interface-based impedance monitoring technique", Smart Struct. Syst., 20(2), 181-195. https://doi.org/10.12989/SSS.2017.20.2.181
  24. Huynh, T.C., Lee, K.S. and Kim, J.T. (2015a), "Local dynamic characteristics of PZT impedance interface on tendon anchorage under prestress force variation", Smart Struct. Syst., 15(2), 375-393. https://doi.org/10.12989/sss.2015.15.2.375
  25. Huynh, T.C., Nguyen, T.C., Choi, S.H. and Kim, J.T. (2016), "Impedance monitoring at tendon-anchorage via mountable PZT interface and temperature-effect compensation", Proceedings of SPIE, 9799, 1-6.
  26. Huynh, T.C., Park, J.H. and Kim, J.T. (2016b), "Structural identification of cable-stayed bridge under backto-back typhoons by wireless vibration monitoring", Measurement, 88, 385-401. https://doi.org/10.1016/j.measurement.2016.03.032
  27. Huynh, T.C., Park, Y.H., Park, J.H. and Kim, J.T. (2015b), "Feasibility verification of mountable PZTinterface for impedance monitoring in tendon-anchorage", Shock Vib., 1-11.
  28. Huynh, T.C., Park, Y.H., Park, J.H., Hong, D.S. and Kim, J.T. (2015c), "Effect of temperature variation on vibration monitoring of prestressed concrete structures", Shock Vib., 1-9.
  29. Kim, J.T., Huynh, T.C. and Lee, S.Y. (2014), "Wireless structural health monitoring of stay cables under two consecutive typhoons", Struct. Monit. Maint., 1(1), 47-67. https://doi.org/10.12989/SMM.2014.1.1.047
  30. Kim, J.T., Nguyen, K.D. and Huynh, T.C. (2013), "Wireless health monitoring of stay cable using piezoelectric strain response and smart skin technique", Smart Struct. Syst., 12(3-4), 381-379. https://doi.org/10.12989/sss.2013.12.3_4.381
  31. Kim, J.T., Park, J.H., Hong, D.S. and Park, W.S. (2010), "Hybrid health monitoring of prestressed concrete girder bridges by sequential vibration-impedance approaches", Eng. Struct., 32, 115-128. https://doi.org/10.1016/j.engstruct.2009.08.021
  32. Kim, J.T., Park, J.H., Hong, D.S. and Ho, D.D. (2011), "Hybrid acceleration-impedance sensor nodes on Imote2-platform for damage monitoring in steel girder connections", Smart Struct. Syst., 7(5), 393-416. https://doi.org/10.12989/sss.2011.7.5.393
  33. Kim, J.T., Yun, C.B. and Yi, J.H. (2003), "Temperature effects on frequency-based damage detection in plate-girder bridges", J. KSCE, 7(6), 725-733.
  34. Koo, K.Y, Park, S.H., Lee, J.J., and Yun, C.B. (2009), "Automated impedance-based structural health monitoring incorporating effective frequency shift for compensating temperature effects", J. Intel. Mat. Syst. Str., 20, 367-377. https://doi.org/10.1177/1045389X08088664
  35. Lee, S.B. (1996), "Fatigue failure of welded vertical members of a steel truss bridge", Eng. Fail. Anal., 3(2), 103-108. https://doi.org/10.1016/1350-6307(96)00003-9
  36. Liang, C., Sun, F.P. and Rogers, C.A. (1994), "Coupled electro-mechanical analysis of adaptive material -Determination of the actuator power consumption and system energy transfer", J. Intel. Mat. Syst. Str., 5, 12-20. https://doi.org/10.1177/1045389X9400500102
  37. Liang, C., Sun, F.P. and Rogers, C.A. (1996), "Electro-mechanical impedance modeling of active material systems", Smart Mater. Struct., 5(2), 171-186. https://doi.org/10.1088/0964-1726/5/2/006
  38. Lim, H.J., Kim, M.K., Sohn, H. and Park, C.Y. (2011), "Impedance-based damage detection under varying temperature and loading conditions", NDT&E Int., 44, 740-750. https://doi.org/10.1016/j.ndteint.2011.08.003
  39. Lim, Y.Y. and Soh, C.K. (2012), "Effect of varying axial load under fixed boundary condition on admittance signatures of electromechanical impedance technique", J. Intel. Mat. Syst. Str., 23(7), 815-826. https://doi.org/10.1177/1045389X12437888
  40. Lopes, V., Park, G., Cudney, H.H. and Inman, D.J. (2000), "Impedance-based structural health monitoring with artificial neural networks", J. Intel. Mat. Syst. Str., 11, 206-214. https://doi.org/10.1106/H0EV-7PWM-QYHW-E7VF
  41. Lynch, J.P., Sundararajan, A., Law, K.H., Kiremidjian, A.S., Kenny, T. and Carryer, E. (2003), "Embedment of structural monitoring algorithms in a wireless sensing unit", Struct. Eng. Mech., 15(3), 385-297.
  42. Mascarenas, D, Todd, M.D., Park, G. and Farrar, C.R. (2007), "Development of an impedance-based wireless sensor node for structural health monitoring", Smart Mater. Struct., 16(6), 2137-2145. https://doi.org/10.1088/0964-1726/16/6/016
  43. Min, J., Park, S. and Yun, C.B. (2010), "Impedance-based structural health monitoring using neural networks for autonomous frequency range selection", Smart Mater. Struct., 17(6), 1-10.
  44. Min, J., Park, S., Yun, C.B. and Song, B. (2010), "Development of a low-cost multifunctional wireless impedance sensor node", Smart Struct. Syst., 6(5-6), 689-709. https://doi.org/10.12989/sss.2010.6.5_6.689
  45. Min, J., Park, S., Yun, C.B., Lee, C.G. and Lee, G. (2012), "Impedance-based structural health monitoring incorporating neural network technique for identification of damage type and severity‟, Eng. Struct., 39, 210-220. https://doi.org/10.1016/j.engstruct.2012.01.012
  46. Min, J., Yi, J.H. and Yun, C.B. (2015), "Electromechanical impedance-based long-term SHM for jacket-type tidal current power plant structure", Smart Struct. Syst., 15(2), 283-297. https://doi.org/10.12989/sss.2015.15.2.283
  47. Nagayama, T. (2007), "Structural health monitoring using smart sensors", Ph.D. Dissertation, University of Illinois at Urbana-Champaign.
  48. National Transportation Safety Board (NTSB) (2008), "Highway accident report interstate 35W collapse over the Mississippi River Minneapolis, Minnesota, August 1, 2007". National Transportation Safety Board, NTSB/HAR-08/02, Washington, D.C.
  49. Nguyen, K.D. and Kim, J.T. (2012), "Smart PZT-interface for wireless impedance-based prestress-loss monitoring in tendon-anchorage connection", Smart Struct. Syst., 9(6), 489-504. https://doi.org/10.12989/sss.2012.9.6.489
  50. Nguyen, K.D., Lee, S.Y., Lee, P.Y. and Kim, J.T. (2011), "Wireless SHM for bolted connections via multiple PZT-interfaces and Imote2-platformed impedance sensor node", Proceedings of the ANCRiSST 2011, Dalian, China, July 2011.
  51. Nguyen, T.C., Huynh, T.C., Yi, J.H. and Kim, J.T. (2017), "Hybrid bolt-loosening detection in wind turbine tower structures by vibration and impedance responses", Wind Struct., 24(4), 385-403. https://doi.org/10.12989/was.2017.24.4.385
  52. Park, G., Cudney, H. and Inman, D.J. (2000), "Impedance-based health monitoring of civil structural components", J. Infrastruct. Syst. - ASCE, 6(4), 153-160. https://doi.org/10.1061/(ASCE)1076-0342(2000)6:4(153)
  53. Park, G., Kabeya, K., Cudney, H. and Inman, D. (1999), "Impedance-based structural health monitoring for temperature varying applications", JSME Int. J. Series A Solid Mech. Mater. Eng., 42, 249-258. https://doi.org/10.1299/jsmea.42.249
  54. Park, G., Sohn, H., Farrar, C. and Inman, D. (2003), "Overview of piezoelectric impedance-based health monitoring and path forward", Shock Vib. Digest, 35(6), 451-463. https://doi.org/10.1177/05831024030356001
  55. Park, J.H. (2009), "Development of autonomous smart sensor nodes for hybrid structural health monitoring of large structures", Ph.D. Thesis, PKNU, Korea.
  56. Park, J.H., Huynh, T.C. and Kim, J.T. (2015), "Temperature effect on wireless impedance monitoring in tendon anchorage of prestressed concrete girder", Smart Struct. Syst., 15(4), 1159-1175. https://doi.org/10.12989/sss.2015.15.4.1159
  57. Park, J.H., Kim, J.T., Hong, D.S., Mascarenas, D. and Lynch, J.P. (2010), "Autonomous smart sensor nodes for global and local damage detection of prestressed concrete bridges based on accelerations and impedance measurements", Smart Struct. Syst., 6(5), 711-730. https://doi.org/10.12989/sss.2010.6.5_6.711
  58. Park, S., Park, G., Yun, C.B. and Farrar, C.R. (2008), "Sensor self-diagnosis using a modified impedance model for active sensing-based structural health monitoring", Structural Health Monitoring.
  59. Park, S., Shin, H.H. and Yun, C.B. (2009), "Wireless impedance sensor nodes for functions of structural damage identification and sensor self-diagnosis", Smart Mater. Syst., 18, 1-11.
  60. Perera, R., Perez, A., Garcia-Dieguez, M. and Zapico-Valle J.L. (2017), "Active wireless system for structural health monitoring applications", Sensors, 17, 1-16. https://doi.org/10.1109/JSEN.2017.2761499
  61. Piezo Systems (2011), http://www.piezo.com
  62. Priya, C.B., Reddy, A.L., Rao, G.V.R., Gopalakrishnan, N. and Rao, A.R.M. (2014), "Low frequency and boundary condition effects on impedance based damage identification", Case Studies in Nondestructive Testing and Evaluation, 2, 9-13. https://doi.org/10.1016/j.csndt.2014.05.001
  63. Rabelo D.S., Steffen, V., Neto, R.M.F. and Lacerda, H.B. (2017), "Impedance-based structural health monitoring and statistical method for threshold-level determination applied to 2024-T3 aluminum panels under varying temperature", Struct. Health Monit., 16(4), 1-17.
  64. Raju, V. (1998), "Implementing impedance-based health monitoring technique", Master Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA.
  65. Ritdumrongkul, S., Abe, M., Fujino, Y. and Miyashita, T. (2004), "Quantitative health monitoring of bolted joints using a piezoceramic actuator-sensor", Smart Mater. Struct., 13, 20-29. https://doi.org/10.1088/0964-1726/13/1/003
  66. Ryu, J.Y., Huynh, T.C. and Kim, J.T. (2017), "Experimental investigation of magnetic-mount PZT-interface for impedance-based damage detection in steel girder connection", Struct. Monit. Maint., 4(3), 237-253 https://doi.org/10.12989/SMM.2017.4.3.237
  67. Sepehry, N., Shamshirsaz, M. and Abdollahi, F. (2011), "Temperature variation effect compensation in impedance-based structural health monitoring using neural networks", J. Intel. Mat. Syst. Str., 20(10), 1-8.
  68. Siebel, T. and Lilov, M. (2013), "Experimental investigation on improving electromechanical impedance based damage detection by temperature compensation", Key Eng. Mater., 569-570, 1132-1139. https://doi.org/10.4028/www.scientific.net/KEM.569-570.1132
  69. Sodano, H.A., Park, G. and Inman, D.J. (2004), "An investigation into the performance of macro-fiber composites for sensing and structural vibration applications", Mech. Syst. Signal Pr., 18, 683-697. https://doi.org/10.1016/S0888-3270(03)00081-5
  70. Soh, C.K., Tseng, K.K., Bhalla, S. and Gupta, A. (2000), "Performance of smart piezoceramic patches in health monitoring of a RC bridge", Smart Mater. Struct., 9, 533-542. https://doi.org/10.1088/0964-1726/9/4/317
  71. Sohn, H. (2007) "Effects of environmental and operational variability on structural health monitoring", Philos. T. R. Soc. A, 365, 539-560. https://doi.org/10.1098/rsta.2006.1935
  72. Spencer, B.F., Ruiz-Sandoval, M.E. and Kurata, N. (2004), "Smart sensing technology: opportunities and challenges", Struct. Control Health Monit., 11, 349-368. https://doi.org/10.1002/stc.48
  73. Stokes, J. P., and Cloud, G.L. (1993), "The application of interferometric techniques to the nondestructive inspection of fiber-reinforced materials", Exper. Mech., 33, 314-319. https://doi.org/10.1007/BF02322147
  74. Studer, M. and Peters, K. (2004), "Multiscale sensing for damage identification", Smart Mater. Struct., 13(2), 283-294. https://doi.org/10.1088/0964-1726/13/2/006
  75. Sun, F.P., Chaudhry Z., Liang, C. and Rogers C.A. (1995), "Truss structure integrity identification using PZT sensor-actuator", J. Intel. Mat. Syst. Str., 6, 134-139. https://doi.org/10.1177/1045389X9500600117
  76. Tibaduiza, D.A., Mujica, L.E. and Rodellar, J. (2013), "Damage classification in structural health monitoring using principle component analysis and self-organizing maps", Struct. Control Health Monit., 20, 1303-1316. https://doi.org/10.1002/stc.1540
  77. Wang, D., Wang. Q., Wang, H. and Zhu H. (2016), "Experimental study on damage detection in timber specimens based on an electromechanical impedance technique and RMSD-based Mahalanobis distance", Sensors, 1-17.
  78. Woon, C.E. and Mitchell, L.D. (1996), "Variations in structural dynamic characteristics caused by changes in ambient temperature: Part I. Experimental", Proceeding of the 14th IMAC, SEM, 963-971.
  79. Yang, J., Zhu, H., Wang, D. and Ai, D. (2015), "The compensation technique of tensile force effect on the electro-mechanical impedance method for structural health monitoring", J. Intel. Mat. Syst. Str., 1-12.
  80. Yang, Y. and Miao, A. (2010), "Two-dimensional modeling of the effects of external vibration on the PZT impedance signatures", Smart Mater. Struct., 19, 1-7.
  81. Yang, Y., Annamdas, V.G.M., Wang, C. and Zhou, Y. (2008), "Application of multiplexed FBG and PZT impedance sensors for health monitoring of rocks", Sensors, 8, 271-289. https://doi.org/10.3390/s8010271
  82. Yun, C.; Cho, S.; Park, H.; Min, J. and Park, J. (2013), "Smart wireless sensing and assessment for civil infrastructure", Struct. Infrastruct. Eng. Maint. Manag. Life-Cycle Design Perform., 10(4), 534-550.
  83. Zagrai, A.N. and Giurgiutiu, V. (2001), "Electro-mechanical impedance method for crack detection in thin plates", J. Intelligent Material Systems and Structures, 12, 709-718. https://doi.org/10.1177/104538901320560355
  84. Zahedi, F. and Huang, H. (2017), "Time-frequency analysis of electromechanical impedance (EMI) signature for physics-based damage detections using piezoelectric wafer active sensor (PWAS)", Smart Mater. Struct., 26, 1-9.

피인용 문헌

  1. Feasibility study of a touch-enabled active sensing approach to inspecting subsea bolted connections using piezoceramic transducers vol.29, pp.8, 2020, https://doi.org/10.1088/1361-665x/ab84ba
  2. Understanding Impedance Response Characteristics of a Piezoelectric-Based Smart Interface Subjected to Functional Degradations vol.2021, pp.None, 2017, https://doi.org/10.1155/2021/5728679
  3. Development of Smart Sensing Technology Approaches in Structural Health Monitoring of Bridge Structures vol.2021, pp.None, 2017, https://doi.org/10.1155/2021/2615029
  4. Review of Current Guided Wave Ultrasonic Testing (GWUT) Limitations and Future Directions vol.21, pp.3, 2017, https://doi.org/10.3390/s21030811
  5. Anchor Force Monitoring Using Impedance Technique with Single-Point Mount Lead-Zirconate-Titanate Interface: A Feasibility Study vol.11, pp.9, 2017, https://doi.org/10.3390/buildings11090382