DOI QR코드

DOI QR Code

Improved Efficiency Methodology of 100kW-Energy Storage System with Wide-Voltage Range for DC Distribution

직류배전을 위한 넓은 전압범위를 가지는 100kW급 에너지저장장치의 고효율화 방안연구

  • Received : 2016.09.01
  • Accepted : 2016.11.30
  • Published : 2017.02.20

Abstract

This paper describes a 100 kW high-efficiency isolated DC-DC converter for DC distribution system. The DC-DC converter consists of two dual-active-bridge (DAB) converters in parallel. The operating principle of the DAB converter is explained, and the algorithm for parallel operation of the DAB converters is proposed. Simulation and experiments are conducted to verify the performance of the proposed system. Experimental results demonstrate that the developed converter excellently marks 97.4 percent of peak efficiency under its normal operating condition.

Keywords

References

  1. S. S. Thale and R. G. Wadhare, "A novel reconfigurable microgrid architecture with renewable energy sources and storage," IEEE Transactions on Industry Applications, Vol. 51, No. 2, pp. 1805-1816, Mar. 2015. https://doi.org/10.1109/TIA.2014.2350083
  2. R. Majumder, A. Ghosh, G. Ledwich, and F. Zare, "Power management and power flow control with back-to-back converters in a utility connected microgrid," IEEE Transactions on Power Systems, Vol. 25, No. 2, pp. 821-834, May 2010, https://doi.org/10.1109/TPWRS.2009.2034666
  3. K. Hu, and C. M. Liaw, "Incorporated operation control of DC microgrid and electric vehicle," IEEE Transactions on Industrial Electronics, Vol. 63, No. 1, pp. 202-215, Jan. 2016, https://doi.org/10.1109/TIE.2015.2480750
  4. H. Akagi, T. Yamagishi, and N. M. L. Tan, "Power-loss breakdown of a 750-V 100-kW 20-kHz bidirectional isolated DC-DC converter using SiC-MOSFET/SBD dual modules," IEEE Transactions on Industrial Application, Vol. 51, No. 1, pp. 750-757, June 2015.
  5. F. Krismer, "Modeling and optimization of bidirectional dual active bridge DC-DC converter topologies," Ph.D. dissertation, University of Technology Vienna, 2010.
  6. F. Krismer and J. W. Kolar, "Efficiency-optimized high-current dual active bridge converter for automotive applications," IEEE Transactions on Industrial Application, Vol. 59, No. 7, pp. 2745-2760, July 2012.
  7. A. K. Jain and R. Ayyanar, "PWM control of dual active bridge: Comprehensive analysis and experimental verification," IEEE Transactions on Power Electrons, Vol. 26, No. 4, pp. 1215-1227, April 2011. https://doi.org/10.1109/TPEL.2010.2070519
  8. C. Nan, "Dual active bridge converter with PWM control in solid state transformer application," Master dissertation, University of Arizona State, pp. 4747-4753, 2012.
  9. B. J. Byen, K. P. Kang, Y. H. Cho, and A. N. Yoo, "A high-efficiency variable modulation strategy for a dual active bridge converter with a wide operating range," Proc. Int. Conference on Power Electronics and ECCE Asia(ICPE-ECCE Asia), pp. 240-245, 2015.
  10. J. Liu, Y. Miura, and T. Ise, "Comparison of dynamic characteristics between virtual synchronous generator and droop control in inverter-based distributed generators," IEEE Transactions on Power Electrons, Vol. 31, No. 5, pp. 3600-3611, May 2016. https://doi.org/10.1109/TPEL.2015.2465852
  11. B. J Byen, J. M Choe, and G. H Choe, "High-performance voltage controller design based on capacitor current control model for stand-alone inverter," Journal of Electrical Engineering & Technology, Vol. 10, No. 4, pp. 1635-1645, Sep. 2015. https://doi.org/10.5370/JEET.2015.10.4.1635