DOI QR코드

DOI QR Code

Experiments and numerical analyses for composite RC-EPS slabs

  • Skarzynski, L. (Faculty of Civil and Environmental Engineering, Gdansk University of Technology) ;
  • Marzec, I. (Faculty of Civil and Environmental Engineering, Gdansk University of Technology) ;
  • Tejchman, J. (Faculty of Civil and Environmental Engineering, Gdansk University of Technology)
  • 투고 : 2016.01.28
  • 심사 : 2017.08.10
  • 발행 : 2017.12.25

초록

The paper presents experimental and numerical investigations of prefabricated composite structural building reinforced concrete slabs with the insulating material for a residential building construction. The building slabs were composed of concrete and expanded polystyrene. In experiments, the slabs in the full-scale 1:1 were subjected to vertical concentrated loads and failed along a diagonal shear crack. The experiments were numerically evaluated using the finite element method based on two different constitutive continuum models for concrete. First, an elasto-plastic model with the Drucker-Prager criterion defined in compression and with the Rankine criterion defined in tension was used. Second, a coupled elasto-plastic-damage formulation based on the strain equivalence hypothesis was used. In order to describe strain localization in concrete, both models were enhanced in the softening regime by a characteristic length of micro-structure by means of a non-local theory. Attention was paid to the formation of critical diagonal shear crack which was a failure precursor.

키워드

과제정보

연구 과제번호 : Innovative complex system solution for energy-saving residential buildings of a high comfort class in an unique prefabricated technology and assembly of composite panels

연구 과제 주관 기관 : National Centre of Research and Development NCBR

참고문헌

  1. Abaqus (2004), Theory Manual, Version 5.8, Hibbit, Karlsson & Sorensen Inc.
  2. Bazant, Z.P. and Jirasek, M. (2002), "Non-local integral formulations of plasticity and damage: Survey of progress", J. Eng. Mech., 128(11), 1119-1149. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:11(1119)
  3. Bazant, Z.P., Le, J.L. and Hoover, C. (2010), "Nonlocal boundary layer model: overcoming boundary condition problems in strength statistics and fracture anslysis of quasibrittle materials", Proceedings of the Fracture Mechanics of Concrete and Concrete Structures, Jeju Island, Korea.
  4. Bobinski, J. and Tejchman J. (2004), "Numerical simulations of localization of deformation in quasi-brittle materials within nonlocal softening plasticity", Comput. Concrete, 1(4), 1-22. https://doi.org/10.12989/cac.2004.1.1.001
  5. Borino, G., Failla, B. and Parrinello, F. (2003), "A symmetric nonlocal damage theory", J. Sol. Struct., 40(13), 3621-3645. https://doi.org/10.1016/S0020-7683(03)00144-6
  6. Brinkgreve, R.B.J. (1994), "Geomaterial models and numerical analysis of softening", Ph.D. Dissertation, Delft University of Technology, the Netherlands.
  7. Carol, I. and Willam, K. (1996), "Spurious energy dissipation/generation in stiffness recovery models for elastic degradation and damage", J. Sol. Struct., 33(20-22), 2939-2957. https://doi.org/10.1016/0020-7683(95)00254-5
  8. CEB-FIP Model Code (1990), Concrete Structures, 228, 1-205.
  9. Chen, J.F., Morozov, E.V. and Shankar, K. (2012), "A combined elastoplastic damage model for progressive failure analysis of composite materials and structures", Compos. Struct., 94(12), 3478-3489. https://doi.org/10.1016/j.compstruct.2012.04.021
  10. De Luca, A., Zadeh, H. and Nanni, A. (2014), "In situ load testing of a one-way reinforced concrete slab per the ACI 437 standard", J. Perform. Constr. Facil., 28(5), 04014022. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000441
  11. Den Uijl, J.A. and Bigaj, A.J. (1996), "A bond model for ribbed bars based on concrete confinement", Heron, 41(3), 201-226.
  12. Dorr, K. (1980), "Ein beitag zur berechnung von stahlbetonscheiben unter berucksichtigung des verbundverhaltens", Ph.D. Dissertation, Darmstadt University.
  13. Dulude, C., Ahmed, E., El-Gamal, S. and Benmokrane, B. (2011), "Testing of large-scale two-way concrete slabs reinforced with GFRP Bars", Proceedings of the 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, September.
  14. Eligehausen, R., Popov, E.P. and Bereto, V.V. (1982), "Local bond stress-slip relationships of deformed bars under generalized excitations", Proceedings of the 7th European Conference on Earthquake Engineering, Athens.
  15. Etse, G. and Willam, K. (1994), "Fracture energy formulation for inelastic behavior of plain concrete", J. Eng. Mech., 120(9), 1983-2011. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:9(1983)
  16. Eurocode 2: PN-EN (1992), Design of Concrete Structures-Part 1: General Rules and Rules for Buildings.
  17. Faria, R., Oliver, J. and Cervera, M. (1998), "A strain-based plastic viscous-damage model for massive concrete structures", J. Sol. Struct., 35(14), 1533-1558. https://doi.org/10.1016/S0020-7683(97)00119-4
  18. Feenstra, P.H. and De Borst, R. (1996), "A composite plasticity model for concrete", J. Sol. Struct., 33(5), 707-730. https://doi.org/10.1016/0020-7683(95)00060-N
  19. Gabet, T., Malecot, Y. and Daudeville, L. (2008), "Triaxial behaviour of concrete under high stresses: Influence of the loading path on compaction and limit states", Cement Concrete Res., 38(3), 403-412. https://doi.org/10.1016/j.cemconres.2007.09.029
  20. Geers, M.G.D. (1997), "Experimental analysis and computational modeling of damage and fracture", Ph.D. Dissertation, Eindhoven University of Technology, Eindhoven, the Netherlands.
  21. Giry, C., Dufour, F. and Mazars, J. (2011), "Stress-based nonlocal damage model", J. Sol. Struct., 48(25), 3431-3443. https://doi.org/10.1016/j.ijsolstr.2011.08.012
  22. Grassl, P., Xenos, D., Nystrom, U., Rempling, R. and Gylltoft, K. (2013), "CDPM2: A damage-plasticity approach to modelling the failure of concrete", J. Sol. Struct., 50, 3805-3816. https://doi.org/10.1016/j.ijsolstr.2013.07.008
  23. Haskett, M., Pehlers, D.J. and Mohamed Ali, M.S. (2008), "Local and global bond characteristics of steel reinforcing bars", Eng. Struct., 30(2), 376-383. https://doi.org/10.1016/j.engstruct.2007.04.007
  24. Korol, E. Tejchman, J. and Mroz, Z. (2014), "FE analysis of size effects in reinforced concrete beams without shear reinforcement based on stochastic elasto-plasticity with nonlocal softening", Fin. Elem. Analy. Des., 88, 25-41. https://doi.org/10.1016/j.finel.2014.05.005
  25. Korol, E. Tejchman, J. and Mroz, Z. (2017), "Experimental and numerical assessment of size effect in geometrically similar slender concrete beams with basalt reinforcement", Eng. Struct., 141, 272-291. https://doi.org/10.1016/j.engstruct.2017.03.011
  26. Krajcinovic, D. and Fonseka, G. (1981), "The continuous damage theory of brittle materials", J. Appl. Mech., 48(4), 809-824. https://doi.org/10.1115/1.3157739
  27. Lantsoght, E., Van Der Veen, C. and Walraven, J. (2010), "Shear tests of reinforced concrete slabs with concentrated loads near to supports", Proceedings of the 8th FIB Ph.D. Symposium in Kgs. Lyngby, Denmark.
  28. Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  29. Lorrain, M., Maurel, O. and Seffo, M. (1998), "Cracking behaviour of reinforced high-strength concrete tension ties", ACI Struct. J., 95(5), 626-635.
  30. Lowes, L.N., Moehle, J.P. and Govindjee, S. (2004), "Concretesteel bond model for use in finite element modeling of reinforced concrete structures", ACI Struct. J., 101(4), 501-511.
  31. Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A plasticdamage model for concrete", J. Sol. Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4
  32. Mahnken, R. and Kuhl, E. (1999), "Parameter identification of gradient enhanced damage models", Eur. J. Mech. A/Sol., 18(5), 819-835. https://doi.org/10.1016/S0997-7538(99)00127-8
  33. Majewski, T., Bobinski, J. and Tejchman, J. (2008), "FE-analysis of failure behaviour of reinforced concrete columns under eccentric compression", Eng. Struct., 30(2), 300-317. https://doi.org/10.1016/j.engstruct.2007.03.024
  34. Malvar, L.J. (1992), "Bond reinforcement under controlled confinement", ACI Mater. J., 96(6), 593-601.
  35. Marzec, I. and Tejchman, J. (2012), "Enhanced coupled elastoplastic-damage models to describe concrete behaviour in cyclic laboratory tests: Comparison and improvement", Arch. Mech., 64(3), 227-259.
  36. Marzec, I., Bobinski, J. and Tejchman, J. (2007), "Simulations of crack spacing in reinforced concrete beams using elasticplasticity and damage with non-local softening", Comput. Concrete, 4(5), 377-403. https://doi.org/10.12989/cac.2007.4.5.377
  37. Marzec, I., Skarzynski, L., Bobinski, J. and Tejchman, J. (2013), "Modelling reinforced concrete beams under mixed sheartension failure with different continuous FE approaches", Comput. Concrete, 12(5), 585-612. https://doi.org/10.12989/cac.2013.12.5.585
  38. Mazars, J. (1986), "A description of micro- and macroscale damage of concrete structures", Eng. Fract. Mech., 25(5-6), 729-737. https://doi.org/10.1016/0013-7944(86)90036-6
  39. Mihai, I.C., Jefferson, A.D. and Lyons, P. (2016), "A plasticdamage constitutive model for the finite element analysis of fibre reinforced concrete", Eng. Fract. Mech., 159, 35-62. https://doi.org/10.1016/j.engfracmech.2015.12.035
  40. Nielsen, M.P. and Brae strup, M. (1976), W. Plastic Shear Strength of Reinforced Concrete Beams, Report R 73, University of Denmark.
  41. Pamin, J. and De Borst, R. (1999), "Stiffness degradation in gradient-dependent coupled damage-plasticity", Arch. Mech., 51(3-4), 419-446.
  42. Peerlings, R.H.J., De Borst, R., Brekelmans, W.A.M. and Geers, M.G.D. (1998), "Gradient enhanced damage modelling of concrete fracture", Mech. Cohes.-Frict. Mater., 3(4), 323-342. https://doi.org/10.1002/(SICI)1099-1484(1998100)3:4<323::AID-CFM51>3.0.CO;2-Z
  43. Pijauder-Cabot, G. and Bazant, Z.P. (1987), "Non-local damage theory", ASCE J. Eng. Mech., 113, 1512-1533. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:10(1512)
  44. Pijauder-Cabot, G. and Dufour, F. (2010), "Non-local damage model boundary and evolving boundary effects", Eur. J. Environ. Civil Eng., 14(6-7), 729-749.
  45. Polish Standard (2002), PN-B-03264.
  46. Polizzotto, C, Borino, G. and Fuschi, P. (1998), "A thermodynamically consistent formulation of nonlocal and gradient plasticity", Mech. Res. Commun., 25(1), 75-82. https://doi.org/10.1016/S0093-6413(98)00009-3
  47. Rehm, G. and Eligehausen R. (1979), "Bond of ribbed bars under high cycle repeated loads", J. Am. Concrete Inst., 297-309.
  48. Saouridis, C. and Mazars, J. (1992), "Prediction of the failure and size effect in concrete via a bi-scale damage approach", Eng. Comput., 9(3), 329-344. https://doi.org/10.1108/eb023870
  49. Sewaco System, Patent Implementations, PCT/PL2012/000076, P.396140, P.400541, P.400558.
  50. Simo, J.C. and Ju, J. (1987), "Strain- and stress-based continuum damage models-I. Formulation", J. Sol. Struct., 23(7), 821-840. https://doi.org/10.1016/0020-7683(87)90083-7
  51. Skarzynski, L, Syroka, E. and Tejchman, J. (2011), "Measurements and calculations of the width of fracture process zones on the surface of notched concrete beams", Strain, 47(s1), 319-332. https://doi.org/10.1111/j.1475-1305.2008.00605.x
  52. Skarzynski, L. and Tejchman, J. (2010), "Calculations of fracture process zones on meso-scale in notched concrete beams subjected to three-point bending", Eur. J. Mech./A Sol., 29(4), 746-760. https://doi.org/10.1016/j.euromechsol.2010.02.008
  53. Skarzynski, L. and Tejchman, J. (2013), "Experimental investigations of fracture process in plain and reinforced concrete beams under bending", Strain, 49(6), 521-543. https://doi.org/10.1111/str.12064
  54. Smakosz, L. and Tejchman, J. (2014), "Evaluation of strength, deformability and failure mode of composite structural insulated panels", Mater. Des., 54, 1068-1082. https://doi.org/10.1016/j.matdes.2013.09.032
  55. Syroka-Korol, E. and Tejchman, J. (2014), "Experimental investigations of size effect in reinforced concrete beams failing by shear", Eng. Struct., 58, 63-78. https://doi.org/10.1016/j.engstruct.2013.10.012
  56. Tejchman, J. and Bobinski, J. (2012), Continuous and Discontinuous Modeling of Fracture in Concrete Using FEM, Springer, Berlin-Heidelberg.
  57. Website: www.sewaco.pl.
  58. Willam, K.J. and Warnke, E.P. (1975), "Constitutive model for the triaxial behavior of concrete", Proceedings of the Concrete Structures Subjected to Triaxial Stresses, Begamo, Italy.
  59. Xotta, G., Beizaee, S. and Willam, K.J. (2016), "Bifurcation investigations of coupled damage-plasticity models for concrete materials", Comput. Meth. Appl. Mech. Eng., 298, 428-452. https://doi.org/10.1016/j.cma.2015.10.010
  60. Zhang, J.P. (1994), Strength of Cracked Concrete. Part 1: Shear Strength of Conventional Reinforced Concrete Beams, Deep Beams, Corbels and Prestressed Reinforced Concrete Beams without Shear Reinforcement, Report of Technical University of Denmark, Lungby Denmark.

피인용 문헌

  1. Numerical analyses of novel prefabricated structural wall panels in residential buildings based on laboratory tests in scale 1:1 vol.24, pp.9, 2017, https://doi.org/10.1080/19648189.2018.1474382
  2. Torsional behavior of reinforced concrete plates under pure torsion vol.28, pp.3, 2021, https://doi.org/10.12989/cac.2021.28.3.311