DOI QR코드

DOI QR Code

Case-based reasoning approach to estimating the strength of sustainable concrete

  • Koo, Choongwan (Department of Building Services Engineering, The Hong Kong Polytechnic University) ;
  • Jin, Ruoyu (School of Environment and Technology, University of Brighton) ;
  • Li, Bo (Department of Civil Engineering, University of Nottingham Ningbo China) ;
  • Cha, Seung Hyun (Department of Building Services Engineering, The Hong Kong Polytechnic University) ;
  • Wanatowski, Dariusz (Faculty of Engineering, University of Leeds)
  • Received : 2017.03.28
  • Accepted : 2017.07.19
  • Published : 2017.12.25

Abstract

Continuing from previous studies of sustainable concrete containing environmentally friendly materials and existing modeling approach to predicting concrete properties, this study developed an estimation methodology to predicting the strength of sustainable concrete using an advanced case-based reasoning approach. It was conducted in two steps: (i) establishment of a case database and (ii) development of an advanced case-based reasoning model. Through the experimental studies, a total of 144 observations for concrete compressive strength and tensile strength were established to develop the estimation model. As a result, the prediction accuracy of the A-CBR model (i.e., 95.214% for compressive strength and 92.448% for tensile strength) performed superior to other conventional methodologies (e.g., basic case-based reasoning and artificial neural network models). The developed methodology provides an alternative approach in predicting concrete properties and could be further extended to the future research area in durability of sustainable concrete.

Keywords

Acknowledgement

Supported by : Ningbo Science and Technology Bureau, National Research Foundation of Korea (NRF)

References

  1. Abd, A.M. and Abd, S.M. (2017), "Modelling the strength of lightweight foamed concrete using support vector machine (SVM)", Case Stud. Constr. Mater., 6, 8-15. https://doi.org/10.1016/j.cscm.2016.11.002
  2. ACI (American Concrete Institute) 211.2-04 (2004), Standard Practice for Selecting Proportions for Structural Lightweight Concrete, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  3. ACI (American Concrete Institute) C318-0843 (2008), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  4. ASTM C127-04 (2004), Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  5. ASTM C128-07 (2007), Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  6. ASTM C150-05 (2005), Standard Specification for Portland Cement, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  7. ASTM, ASTM C31/C31M-06 (2007), Standard Practice for Making and Curing Concrete Test Specimens in the Field, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  8. ASTM, ASTM C39/C39-05 (2007), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  9. ASTM, ASTM C496/C496M-11 (2007), Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  10. Atici, U. (2011), "Prediction of the strength of mineral admixture concrete using multivariable regression analysis and an artificial neural network", Exp. Syst. Appl., 38, 9609-9618. https://doi.org/10.1016/j.eswa.2011.01.156
  11. Attalla, M. and Hegazy, T. (2003), "Predicting cost deviation in reconstruction projects: Artificial neural networks versus regression", J. Constr. Eng. Manage., 129(4), 405-411. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:4(405)
  12. Benhelal, E., Zahedi, G., Shamsaei, E. and Bahadori, A. (2013), "Global strategies and potentials to curb CO2 emissions in cement industry", J. Clean. Prod., 15, 142-161.
  13. Bentz, D.P. (2010), "Powder additions to mitigate retardation in high-volume fly ash mixtures", ACI Mater. J., 107(5), 508-514.
  14. Biernacki, J.J and Gottapu, M. (2015), "An advanced single-particle model for C3S hydration-validating the statistical independence of model parameters", Comput. Concrete, 15(6), 989-999. https://doi.org/10.12989/cac.2015.15.6.989
  15. Bogas, J.A., Brito, J. and Figueiredo, J.M. (2015), "Mechanical characterization of concrete produced with recycled lightweight expanded clay aggregate concrete", J. Clean. Prod., 89, 187-195. https://doi.org/10.1016/j.jclepro.2014.11.015
  16. Bondar, D., Lynsdale, C.J., Milestone, N.B., Hassani, N. and Ramezanianpour, A.A. (2011), "Engineering properties of alkali-activated natural pozzolan concrete", ACI Mater. J., 108(1), 64-72.
  17. Chou, J.S., Chiu, C.K., Farfoura, M. and Al-Taharwa, I. (2011), "Optimizing the prediction accuracy of concrete compressive strength based on a comparison of data-mining techniques", J. Comput. Civil Eng., 242-253.
  18. Deepa, C., Sathiyakumari, K. and Sudha, V. (2010), "Prediction of the compressive strength of high performance concrete mix using tree based modelling", J. Comput. Appl. Technol., 6, 18-24.
  19. Demir, F. (2005), "A new way of prediction elastic modulus of normal and high strength concrete-fuzzy logic", Cement Concrete Res., 35, 1531-1538. https://doi.org/10.1016/j.cemconres.2005.01.001
  20. Dogan, S.Z., Arditi, D., and Gunaydin, H.M. (2006), "Determining attribute weights in a CBR model for early cost prediction of structural systems", J. Constr. Eng. M., 132(10), 1092-1098. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:10(1092)
  21. Duan, Z.H. and Poon, C.S. (2014), "Factors affecting the properties of recycled concrete by using neural networks", Comput. Concrete, 14(5), 547-561. https://doi.org/10.12989/cac.2014.14.5.547
  22. Erdal, H.I., Karakurt, O. and Namli, E. (2013), "High performance concrete compressive strength forecasting using ensemble models based on discrete wavelet transform", Eng. Appl. Artif. Intell., 26(4), 1246-1254. https://doi.org/10.1016/j.engappai.2012.10.014
  23. Erdogan, Y.S. and Bakir, P.G. (2013), "Evaluation of the different genetic algorithm parameters and operators for the finite element model updating problem", Comput. Concrete, 11(6), 541-569. https://doi.org/10.12989/cac.2013.11.6.541
  24. Farahani, J.N., Shafigh, P., Alsubari, B., Shahnazar, S. and Mahmud, H.B. (2017), "Engineering properties of lightweight aggregate concrete containing binary and ternary blended cement", J. Clean. Prod., In Press.
  25. Grist, E.R., Paine, K.A., Heath, A., Norman, J. and Pinder, H. (2015), "The environmental credentials of hydraulic lime-pozzolan concretes", J. Clean. Prod., 93, 26-37. https://doi.org/10.1016/j.jclepro.2015.01.047
  26. Guo, S., Dai, Q., Si, R., Sun, X. and Lu, C. (2017), "Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire", J. Clean. Prod., 148, 681-689. https://doi.org/10.1016/j.jclepro.2017.02.046
  27. Haque, M.N., Kayali, O. and Al-Khaiat, H. (2002), "Structural lightweight concrete-an environmentally responsible material of construction", Proceedings of the International Challenges of Concrete Construction Congress, Scotland, U.K.
  28. Henry, M. and Kato, Y. (2014), "Understanding the regional context of sustainable concrete in Asia: Case studies in Mongolia and Singapore", Res. Conserv. Recycl., 82, 86-93. https://doi.org/10.1016/j.resconrec.2013.10.012
  29. Hossain, K.M.A and Lachemi, M. (2006), "Time dependent equations for the compressive strength of self-consolidating concrete through statistical optimization", Comput. Concrete, 3(4), 249-260. https://doi.org/10.12989/cac.2006.3.4.249
  30. Jin, R., Chen., Q. and Soboyejo, A. (2015), "Survey of the current status of sustainable concrete production in the U.S", Res. Conserv. Recycl., 105, 148-159. https://doi.org/10.1016/j.resconrec.2015.10.011
  31. Juncai, X., Qingwen, R. and Zhenzhong, S. (2015), "Prediction of the strength of concrete radiation shielding based on LS-SVM", Ann. Nucl. Energy., 85, 296-300. https://doi.org/10.1016/j.anucene.2015.05.030
  32. Kandasamy, S. and Akila, P. (2015), "Experimental analysis and modeling of steel fiber reinforced SCC using central composite design", Comput. Concrete, 15(2), 215-229. https://doi.org/10.12989/cac.2015.15.2.215
  33. Koo, C., Hong, T. and Hyun. C. (2011), "The development of a construction cost prediction model with improved prediction capacity using the advanced CBR approach", Exp. Syst. Appl., 38(7), 8597-8606. https://doi.org/10.1016/j.eswa.2011.01.063
  34. Koo, C., Hong, T. and Kim, J. (2014a), "A decision support system for determining the optimal size of a new expressway service area: Focused on the profitability", Dec. Supp. Syst., 67, 9-20. https://doi.org/10.1016/j.dss.2014.07.005
  35. Koo, C., Hong, T., Lee, M. and Park, H.S. (2013), "Estimation of the monthly average daily solar radiation using geographic information system and advanced case-based reasoning", Environ. Sci. Technol., 47(9), 4829-4839. https://doi.org/10.1021/es303774a
  36. Koo, C., Hong, T., Lee, M. and Park, H.S. (2014b), "Development of a new energy efficiency rating system for existing residential buildings", Energy Pol., 68, 218-231.
  37. Langer, W.H. and Arbogast, B.F. (2002), Environmental Impact of Mining Natural Aggregate, Deposit and Geoenvironmental Models for Resource Exploitation and Environmental Security, U.S. Government, 151-170.
  38. Limbachiya, M., Meddah, M.S. and Ouchagour, Y. (2012), "Performance of Portland/silica fume cement concrete produced with recycled concrete aggregate", ACI Mater. J., 109, 91-100.
  39. Lowe, D.J., Emsley, M.W. and Harding, A. (2006), "Predicting construction cost using multiple regression techniques", J. Constr. Eng. Manage., 132(7), 750-758. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:7(750)
  40. Mastali, M., Dalvand, A. and Fakharifar, M. (2016), "Statistical variations in the impact resistance and mechanical properties of polypropylene fiber reinforced self-compacting concrete", Comput. Concrete, 18(1), 113-137. https://doi.org/10.12989/cac.2016.18.1.113
  41. Mohammadhosseini, H. and Yatim, J.M. (2017a), "Microstructure and residual properties of green concrete composites incorporating waste carpet fibers and palm oil fuel ash at elevated temperatures", J. Clean. Prod., 144, 8-21. https://doi.org/10.1016/j.jclepro.2016.12.168
  42. Mohammadhosseini, H., Yatim, J.M., Sam, A.R.M. and Abdul Awal, A.S.M. (2017b), "Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash", J. Clean. Prod., 144, 448-458. https://doi.org/10.1016/j.jclepro.2016.12.151
  43. Muller, M. and Wiederhold, E. (2002), "Applying decision tree methodology for rules extraction under cognitive constraints", Eur. J. Oper. Res., 136, 282-289. https://doi.org/10.1016/S0377-2217(01)00115-1
  44. Ni, H. and Wang, J. (2000), "Prediction of compressive strength of concrete by neural networks", Cement Concrete Res., 30, 1245-1250. https://doi.org/10.1016/S0008-8846(00)00345-8
  45. Omran, B.A., Chen, Q. and Jin, R. (2016), "Comparison of data mining techniques for predicting compressive strength of environmentally friendly concrete", J. Comput. Civil Eng., 30(6).
  46. Phaobunjong, K. (2002), "Parametric cost estimating model for conceptual cost estimating of building construction projects", Ph.D. Dissertation, University of Texas, Austin, Texas, U.S.A.
  47. Rifat, S. (2004), "Conceptual cost estimation of building projects with regression analysis and neural networks", Can. J. Civil Eng., 31(2), 677-683. https://doi.org/10.1139/l04-029
  48. Saridemir, M., Topcu, I.B., Ozcan, F. and Severcan, M.H. (2009), "Prediction of long-term effects of GGBFS on compressive strength of concrete by artificial neural networks and fuzzy logic", Constr. Build. Mater., 23, 1279-1286. https://doi.org/10.1016/j.conbuildmat.2008.07.021
  49. Shafigh, P., Nomeli, M.A., Alengaram, U.J., Mahmud, H.B. and Jumaat, M.Z. (2016), "Engineering properties of lightweight aggregate concrete containing limestone powder and high-volume fly ash", J. Clean. Prod., 135, 148-157. https://doi.org/10.1016/j.jclepro.2016.06.082
  50. Sheng, O.R.L., Wei, C.P., Hu, P.J.H. and Chang, N. (2000), "Automated learning of patient image retrieval knowledge: Neural networks versus inductive decision trees", Dec. Supp. Syst., 30, 105-124. https://doi.org/10.1016/S0167-9236(00)00092-0
  51. Tapali, J.G., Demis, S. and Papadakis, V.G. (2013). "Sustainable concrete mix design for a target strength and service life", Comput. Concrete, 12(6), 755-774. https://doi.org/10.12989/cac.2013.12.6.755
  52. Topcu, I.B. and Boga, A.R. (2010), "Effect of boron waste on the properties of mortar and concrete", Waste. Manage. Res., 28, 626-633. https://doi.org/10.1177/0734242X09345561
  53. Valipour, M., Shekarchi, M. and Arezoumandi, M. (2017), "Chlorine diffusion resistivity of sustainable green concrete in harsh marine environments", J. Clean. Prod., 142, 4092-4100. https://doi.org/10.1016/j.jclepro.2016.10.015
  54. Wang, H.Y., Hsiao, D.H. and Wang, S.Y. (2012), "Properties of recycled green building materials applied in lightweight aggregate concrete", Comput. Concrete, 10(2), 95-104. https://doi.org/10.12989/cac.2012.10.2.095
  55. Xiao, J., Li, L., Shen, L. and Poon, C.S. (2015), "Compressive behaviour of recycled aggregate concrete under impact loading", Cement Concrete Res., 71, 46-55. https://doi.org/10.1016/j.cemconres.2015.01.014
  56. Yan, K., Xu, H., Shen, G. and Liu, P. (2013), "Prediction of splitting tensile strength from cylinder compressive strength of concrete by support vector machine", Adv. Mater. Sci. Eng., 1-13.
  57. Yang, E.I., Yi, S.T. and Leem, Y.M. (2005), "Effect of oyster shell substituted for fine aggregate on concrete characteristics: Part I. Fundamental properties", Cement Concrete Res., 35, 2175-2182. https://doi.org/10.1016/j.cemconres.2005.03.016
  58. Yang, K.H., Jung, Y.B., Cho, M.S. and Tae, S.H. (2015), "Effect of supplementary cementitious materials on reduction of CO2 emissions from concrete", J. Clean. Prod., 103, 774-783. https://doi.org/10.1016/j.jclepro.2014.03.018
  59. Yeh, I.C. (1998), "Modeling of strength of high performance concrete using artificial neural networks", Cement Concrete Res., 28, 1797-1808. https://doi.org/10.1016/S0008-8846(98)00165-3