DOI QR코드

DOI QR Code

Temperature and humidity effects on behavior of grouts

  • 투고 : 2017.07.15
  • 심사 : 2017.12.06
  • 발행 : 2017.12.25

초록

Grouts compared to other material sources, could be highly sensitive to cold weather conditions, especially when the compressive strength is the matter of concern. Grout as one the substantial residential building material used in retaining walls, rebar fixation, sidewalks is in need of deeper investigation, especially in extreme weather condition. In this article, compressive strength development of four different commercial grouts at three temperatures and two humidity rates are evaluated. This experiment is aimed to assess the grout strength development over time and overall compressive strength when the material is cast at low temperatures. Results represent that reducing the curing temperature about 15 degrees could result in 20% reduction in ultimate strength; however, decreasing the humidity percentage by 50% could lead to 10% reduction in ultimate strength. The maturity test results represented the effect of various temperatures and humidity rates on maturity of the grouts. Additionally, the freeze-thaw cycle's effect on the grouts is conducted to investigate the durability factor. The results show that the lower temperatures could be significantly influential on the behavior of grouts compared to lower humidity rates. It is indicated that the maturity test could not be valid and precise in harsh temperature conditions.

키워드

참고문헌

  1. American Concrete Institute Code (2010), Guide to Cold Weather Concreting, Committee 306.
  2. Anderson, K.W., Uhlmeyer, J.S., Kinne, C., Pierce, L.M. and Muench, S. (2009), Use of Maturity Method in Accelerated PCC Concrete, 1-104.
  3. ASTM C 1074-04, Standard Practice for Estimating Concrete Strength by the Maturity Method.
  4. ASTM C 109, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars.
  5. ASTM C 1611, Standard Test Method for Slump Flow of Self-Consolidating Concrete.
  6. ASTM C31, Making and Curing Concrete Specimens in the field, Pennsylvania, U.S.A.
  7. ASTM C666, Standard Test Method for Resistance of concrete to Rapid Freezing and Thawing.
  8. ASTM C94, Standard Specification for Ready Mixed Concrete, Pennsylvania, U.S.A.
  9. Carino, N.J. and Malhotra, V.M. (2003), Chapter 5: The Maturity Method, Handbook on Nondestructive Testing of Concrete, 2nd Edition, 1-47.
  10. Farzampour, A. and Kamali Asl, A. (2015), "Seismic hazard assessment for two cities in Eastern Iran", Earthq. Structures, 8(3), 681-697. https://doi.org/10.12989/eas.2015.8.3.681
  11. Farzampour, A. and Kamali Asl, A. (2017), "Performance of tuned mass dampers in vibration response control of base-excited structures", J. Civil Constr. Environ. Eng., 2(3), 87-94.
  12. Gjorv, O.E. (2013), "Durability design and quality assurance of major concrete infrastructure", Adv. Concrete Constr., 1(1), 45-63. https://doi.org/10.12989/acc.2013.1.1.045
  13. Guneyisi, E., Gesoglu, M., Mermerdas, K. and Ipek, S. (2014), "Experimental investigation on durability performance of rubberized concrete", Adv. Concrete Constr., 2(3), 193-207. https://doi.org/10.12989/acc.2014.2.3.193
  14. Kosmatka, S.H. and Wilson, M.L. (2011), Design and Control of Concrete Mixtures, 15th Edition, Portland Cement Association, Skokie, Illinois.
  15. Krylov, B.A. (2008), Chapter 14: Cold-Weather Concreting, Design and Control of Concrete Mixtures.
  16. Kwon, O. (2013), "Application of the maturity method for the prediction of early strength of concrete under various curing conditions", University of Florida, U.S.A.
  17. Mansouri, I., Kisi, O., Sadeghian, P., Lee, C. and Hu, J.W. (2017), "Prediction of ultimate strain and strength of FRP-confined concrete cylinders using soft", Appl. Sci., 7(8), 751. https://doi.org/10.3390/app7080751
  18. Muhit, I.B. and Raihan, M.T. and Nuruzzaman, M.D. (2014), "Determination of mortar strength using stone dust as a partially replaced material for cement and sand", Adv. Concrete Constr., 2(4), 249-259. https://doi.org/10.12989/acc.2014.2.4.249
  19. Nassif, A.Y. and Petrou, M.F. (2013), "Influence of cold weather during casting and curing on the stiffness and strength of concrete", Constr. Bld. Mater., 44, 161-167. https://doi.org/10.1016/j.conbuildmat.2013.03.016
  20. Patila, A.A., Chore, H.S. and Dode, P.A. (2014), "Effect of curing condition on strength of geopolymer concrete", Adv. Concrete Constr., 2(1), 29-37. https://doi.org/10.12989/acc.2014.2.1.029
  21. Technical Bulletin (2006), Cold Weather Concrete, TB-0106, 1-4.
  22. Zhang, B., Cullen, M. and Kilpatrick, T. (2014), "Fracture toughness of high performance concrete subjected to elevated temperatures Part 1 The effects of heating temperatures and testing conditions (hot and cold)", Adv. Concrete Constr., 2(1), 145-162. https://doi.org/10.12989/acc.2014.2.2.145
  23. Zhang, B., Cullen, M. and Kilpatrick, T. (2016), "Spalling of heated high performance concrete due to thermal and hygric gradients", Adv. Concrete Constr., 4(1), 1-14. https://doi.org/10.12989/acc.2016.4.1.001

피인용 문헌

  1. Investigating the Effect of Aggregate Characteristics on the Macroscopic and Microscopic Fracture Mechanisms of Asphalt Concrete at Low-Temperature vol.12, pp.17, 2019, https://doi.org/10.3390/ma12172675
  2. Investigation of steel fiber effects on concrete abrasion resistance vol.9, pp.4, 2017, https://doi.org/10.12989/acc.2020.9.4.367
  3. Preparation and Performance of Al2O3/Ti(C,N)-Added ZrO2 Whisker and NanoCoated CaF2@Al(OH)3 Powder vol.10, pp.13, 2017, https://doi.org/10.3390/app10134435
  4. Optimized AI controller for reinforced concrete frame structures under earthquake excitation vol.11, pp.1, 2021, https://doi.org/10.12989/acc.2021.11.1.001
  5. Predictive modeling of the compressive strength of bacteria-incorporated geopolymer concrete using a gene expression programming approach vol.27, pp.4, 2017, https://doi.org/10.12989/cac.2021.27.4.319
  6. Study on Sectional Nonuniform Corrosion and Bond Strength of Plain Rebar Embedded in Concrete vol.25, pp.8, 2017, https://doi.org/10.1007/s12205-021-1729-7
  7. Sustained Loading Bond Response and Post-Sustained Loading Behaviour of NSM CFRP-Concrete Elements under Different Service Temperatures vol.11, pp.18, 2017, https://doi.org/10.3390/app11188542
  8. Experimental Study of the Thermal and Dynamic Behaviors of Polypropylene Fiber-Reinforced Concrete vol.11, pp.22, 2017, https://doi.org/10.3390/app112210757
  9. Effect of Rice Straw on Tensile Properties of Tailings Cemented Paste Backfill vol.12, pp.1, 2022, https://doi.org/10.3390/app12010526