한국습지학회지 (Journal of Wetlands Research)

  • 제19권4호
  • /
  • Pages.375-382
  • /
  • 2017
  • /
  • 1229-6031(pISSN)
  • /
  • 2384-0056(eISSN)
한국습지학회 (Korean Wetlands Society)
권호 표지
DOI QR코드

DOI QR Code

방사형 강우 유출의 초기세척 모의 및 소규모 불투수 배수구역에서의 초기우수 처리효과 상승을 위한 집수시설 배치 방안

First flush modeling of the radial type surface runoff and a placement strategy for stormwater inlets to improve the effectiveness of the first flush treatment in a small impervious catchment

  • 강주현 (동국대학교 건설환경공학과) ;
  • 이동훈 (동국대학교 건설환경공학과) ;
  • 김진휘 (동국대학교 건설환경공학과)
  • Kang, Joo-Hyon (Department of Civil and Environmental Engineering, Dongguk University-Seoul) ;
  • Lee, Dong Hoon (Department of Civil and Environmental Engineering, Dongguk University-Seoul) ;
  • Kim, Jin Hwi (Department of Civil and Environmental Engineering, Dongguk University-Seoul)
  • 투고 : 2017.07.19
  • 심사 : 2017.08.29
  • 발행 : 2017.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 방사형 흐름을 가지는 지표 유출수에 대한 오염물질의 초기세척현상 모의를 통하여 주차장과 같은 소규모 불투수 배수구역에서 발생하는 수렴형 강우유출수의 동적 유출특성에 대한 일반적 특성을 고찰하고, 이를 토대로 비점오염저감시설의 초기우수처리 효과를 극대화 시킬 수 있는 집수시설 배치 방안을 제시하고자 하였다. 이를 위하여 1차원 확산파 방정식(diffusion wave equation)과 오염물질 운송방정식을 이용하여 이상적인 방사형 불투수 배수구역에 대한 초기세척현상을 모의 하고, 이 결과를 이용하여 배수구역의 크기에 따른 오염물질의 초기세척강도를 산정 비교하였다. 초기세척 모의결과, 생화학적 산소요구량의 경우 평균경사도 0.02에서 배수구역의 길이 30-50m 범위일 때 초기세척강도가 가장 높았다. 이러한 결과는 주차장과 같은 소규모 불투수 구역에서는 강우유출수 집수시설의 위치와 갯수를 조정함으로써 배수구역의 길이 변경이 가능하며 이를 통하여 초기세척 강도와 첨두부하를 인위적으로 조절 가능함을 시사한다. 특히 초기우수수 처리에 중점을 둘 경우 집수시설의 위치와 갯수를 적절히 조절하여 초기세척 강도를 상승시킴으로써 동일한 용량의 비점오염저감시설로 보다 많은 오염물질 부하저감을 기대할 수 있을 것으로 판단된다.

In this study, general characteristics of dynamic behavior of stormwater runoff from a small impervious catchment was investigated from a series of simulations for a radial type surface runoff. Based on the simulation results, a better placement strategy for stormwater inlets to improve performance of a structural best management practice (BMP) was suggested. The degree of pollutant first flush from an ideal radial type impervious catchment was simulated using a 1-D diffusion wave equation coupled with a pollutant transport equation. The results showed that the first flush of the chemical oxygen demand was the strongest when the catchment length ranged 30-50m at a bed slope of 0.02. This result suggested that a required degree of the first flush can be intentionally obtained by just changing the locations and numbers of stormwater inlets, and thereby adjusting the catchment length. Particularly, the overall performance of a structural BMP in reducing pollutant load can be improved by placing the stormwater inlets at locations for obtaining a required first flush strength.

키워드

참고문헌

  1. Chen, CF, Sheng, MY, Chang, CL, Kang SF, Lin, FY (2014) Application of the SUTAIN model to a watershed-scale case for water quality management, Water, 6(12), pp. 3575-3589. https://doi.org/10.3390/w6123575
  2. Costabile, P, Costanzo, C, Macchione, F, Mercogliano, P (2012) Two-dimensional model for overland flow simulations: A case study, European Water 32, pp. 13-23.
  3. Cristina, CM, Sansalone, JJ (2003) First flush, power law and particle separation diagrams for urban storm-water suspended particulates. J. of Environ. Eng. ASCE 129(4), pp. 298-307. https://doi.org/10.1061/(ASCE)0733-9372(2003)129:4(298)
  4. Deletic, AB, Maksimovic, CT (1998) Evaluation of water quality factors in storm runoff from paved areas. J. of Environ. Eng. ASCE 124(9), pp. 869-879. https://doi.org/10.1061/(ASCE)0733-9372(1998)124:9(869)
  5. Elder, JW (1959) The dispersion of marked fluid in a turbulent shear flow. J. of Fluid Mech. 5(4), pp. 544-560. https://doi.org/10.1017/S0022112059000374
  6. Fiedler, FR, Ramirez JA (2000) A numerical method for simulating discontinuous shallow flow oever an infiltrating surface. International J. of Numerical Methods in Fluids, 32(2), pp. 219-239. https://doi.org/10.1002/(SICI)1097-0363(20000130)32:2<219::AID-FLD936>3.0.CO;2-J
  7. Govindaraju, RS, Kavvas, ML, Tayfur, G (1992) A simplifed model for two-dimensional overland flows, Advances in Water Resources, 15(2), pp. 133-141. https://doi.org/10.1016/0309-1708(92)90040-9
  8. Gupta, K, Saul, AJ (1996) Specific relationship for the first flush load in combined sewer lows. Water Res. 30(5), pp. 1244-1252. https://doi.org/10.1016/0043-1354(95)00282-0
  9. Han. YH, Seo, DI (2014) Application of LID methods for sustainable management of small urban stream using SWMM, J. of Korean Society of Environmental Engineers, 36(10), pp. 691-697. [Korean Literature] https://doi.org/10.4491/KSEE.2014.36.10.691
  10. Jeon, JH, Park, S, Park, CG, Kim, T (2014) Evaluating implementation of EPA SUSTAIN model for cost-effective LID design, J. of the Korean Society of Urban Environment, 14(2), pp. 135-143. [Korean Literature]
  11. Kang, JH (2005) Modeling First Flush and Particle Destabilization: Implications for Design and Operation of Stormwater BMPs. Ph.D. Dissertation, University of California-Los Angeles, Los Angeles, California, USA.
  12. Kang, JH, Kayhanian, M, Stenstrom, MK (2006) Implications of a kinematic wave model for first flush treatment design. Water Res. 40(20), pp. 3820-3830. https://doi.org/10.1016/j.watres.2006.09.007
  13. Kang, JH, Li Y, Lau, SL, Kayhania M, Stenstrom, MK (2007) Particle destablization in highway runoff to optimize pollutant removal. J. of Environ. Eng. ASCE 133(4), pp. 426 - 434. https://doi.org/10.1061/(ASCE)0733-9372(2007)133:4(426)
  14. Kim, LH, Kayhanian, M, Zoh, KD, Stenstrom, MK (2005) Modeling of highway stormwater runoff. Sci. of Total Environ. 348, pp. 1-18. https://doi.org/10.1016/j.scitotenv.2004.12.063
  15. Li Y, Kang, JH, Lau, SL, Kayhanian, M, Stenstrom, MK (2008) Optimization of settling tank design to remove particles and metals. J. of Environ. Eng. ASCE 134(11), pp. 885 - 894. https://doi.org/10.1061/(ASCE)0733-9372(2008)134:11(885)
  16. Ma, M, Khan, S, Li, S, Kim, LH, Ha, S, Kayhanian, M, Stenstrom, MK (2002) First flush phenomena for highways: how it can be meaningfully defined. Proceedings of nineth International Conference on Urban Drainage, September, Portlnad, Oregon.
  17. MOE (2011) Sanitary Sewer Design Criteria, Ministry of Environment. [Korean Literature]
  18. MOE (2014) Manual of Installation and Maintenance of Nonpoint Source Treatment Facilities. Ministry of Environment. [Korean Literature]
  19. Park, Y, Jang, SH, Kim S (2016) Optimum installation of permeatble pavement using multi-objective optimization technique, J. Korean Soc. Hazard Mitig., 16(4), pp. 313-321. [Korean Literature] https://doi.org/10.9798/KOSHAM.2016.16.4.313
  20. Sansalone, JJ, Cristina, CM (2004) First flush concepts for suspended and dissolved solids in small impervious watersheds. J. of Environ. Eng. ASCE 130(11), pp. 1301-1314. https://doi.org/10.1061/(ASCE)0733-9372(2004)130:11(1301)
  21. Sharifi, S, Massoudieh, A, Masoud K (2011). A stochastic stormwater quality volume-sizing method with first flush emphasis. Water Environ Res., 83(11), pp. 2025-2035. https://doi.org/10.2175/106143011X12989211
  22. Shoemaker, L, Khalid, RA, Zhen, JX, Murphy, R, Wood, B (2013) Stormwater management for TMDLs in an arid climate: A case study application of SUSTAIN in Aluquerque, New Mexico-report. U.S. Environmental Protection Agency, Washington, DC, EPA/600/R-13/004
  23. Singh, VP (2002a) Kinematic wave solutions for pollutant transport by runoff over an impervious plane, with instantaneous or finite-period mixing. Hydrol. Process. 16, pp. 1831-1863. https://doi.org/10.1002/hyp.359
  24. Singh, VP (2002b) Kinematic wave solutions for pollutant transport over an infiltrating plane with finite-period mixing and mixing zone. Hydrol. Process. 16, pp. 2441-2477. https://doi.org/10.1002/hyp.1011
  25. Stenstrom, MK (1996) Mathematical models for water quality. Lecture notes, University of California, Los Angeles.
  26. Tomanovic, A, Maksimovic, C (1996) Improved modeling of suspended solids discharge from asphalt surface during storm event. Wat. Sci. Tech. 33(4-5), pp. 363-369. https://doi.org/10.1016/0273-1223(96)00253-3
  27. Yusop, Z, Fai, CM (2017). Determination of stormwater first flush treatment strategies at tropical urban catchments. Desalination and Water Treatment 79(2017), pp. 196-203. https://doi.org/10.5004/dwt.2017.20809