DOI QR코드

DOI QR Code

Numerical analysis and fluid-solid coupling model test of filling-type fracture water inrush and mud gush

  • Li, Li-Ping (Research Center of Geotechnical and Structural Engineering, Shandong University) ;
  • Chen, Di-Yang (Research Center of Geotechnical and Structural Engineering, Shandong University) ;
  • Li, Shu-Cai (Research Center of Geotechnical and Structural Engineering, Shandong University) ;
  • Shi, Shao-Shuai (Research Center of Geotechnical and Structural Engineering, Shandong University) ;
  • Zhang, Ming-Guang (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Liu, Hong-Liang (Research Center of Geotechnical and Structural Engineering, Shandong University)
  • 투고 : 2016.01.11
  • 심사 : 2017.07.05
  • 발행 : 2017.12.25

초록

The geological conditions surrounding the Jijiapo Tunnel of the Three Gorges Fanba Highway project in Hubei Province are very complex. In this paper, a 3-D physical model was carried out to study the evolution process of filling-type fracture water inrush and mud gush based on the conditions of the section located between 16.040 km and 16.042 km of the Jijiapo Tunnel. The 3-D physical model was conducted to clarify the effect of the self-weight of the groundwater level and tunnel excavation during water inrush and mud gush. The results of the displacement, stress and seepage pressure of fracture and surrounding rock in the physical model were analyzed. In the physical model the results of the model test show that the rock displacement suddenly jumped after sustainable growth, rock stress and rock seepage suddenly decreased after continuous growth before water inrushing. Once water inrush occured, internal displacement of filler increased successively from bottom up, stress and seepage pressure of filler droped successively from bottom up, which presented as water inrush and mud gush of filling-type fracture was a evolving process from bottom up. The numerical study was compared with the model test to demonstrate the effectiveness and accuracy of the results of the model test.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Natural Science Foundation of Shandong Province of China, South China University of Technology

참고문헌

  1. Huang, H.F., Mao, X.B., Yao, B.H. and Pu, H. (2012), "Numerical simulation on fault water-inrush based on fluid-solid coupling theory", J. Coal Sci. Eng., 18(3), 291-296. https://doi.org/10.1007/s12404-012-0312-8
  2. Hwang, J.H. and Lu, C.C. (2007), "A semi-analytical method for analyzing the tunnel water inflow", Tunn. Undergr. Sp. Technol., 21(1), 39-46.
  3. Kishida, K., Sawada, A., Yasuhara, H. and Hosoda, T. (2012), "Estimation of fracture flow considering the inhomogeneous structure of single rock fractures", Soils Found., 53(1), 105-116. https://doi.org/10.1016/j.sandf.2012.12.007
  4. Li, C., Li, J., Li, Z. and Hou, D. (2013), "Establishment of spatiotemporal dynamic model for water inrush spreading processes in underground mining operations", Safety Sci., 55, 45-52. https://doi.org/10.1016/j.ssci.2013.01.001
  5. Li, L.P. (2009), "Study on catastrophe evolution mechanism of karst water inrush and its engineering application of high risk karst tunnel", Shandong University, Jinan, China.
  6. Li, L.P., Li, S.C. and Zhang, Q.S. (2010), "Study of mechanism of water inrush induced by hydraulic fracturing in karst tunnels", Rock Soil Mech., 31(2) 523-528.
  7. Li, S.C., Zhou, Z.Q., Li, L.P., Xu, Z.H., Zhang, Q.Q. and Shi, S.S. (2013), "Risk assessment of water inrush in karst tunnels based on attribute synthetic evaluation system", Tunn. Undergr. Sp. Technol., 38, 50-58. https://doi.org/10.1016/j.tust.2013.05.001
  8. Liu, C.H., Chen, C.X. and Fu, S.L. (2002), "Testing study on seepage characteristics of single fracture with sand under shearing displacement", Chin. J. Rock Mech. Eng., 21(10), 1457-1461.
  9. Liu, J., Li, J.L. and Wang, R.H. (2010), "Experimental study of seepage in yichang fractured sandstone with tight original rock fillings", Chin. J. Rock Mech. Eng., 29(2), 367-374.
  10. Liu, Q.Q. and Fan, H.G. (2012), "The characteristics and estimation of flow through a single rough-walled fracture", J. Hydrodyn., 24(3), 315-322. https://doi.org/10.1016/S1001-6058(11)60250-3
  11. Lomize, G.M. (1951), Flow in Fractured Rocks, Gesenergoizdat, Moscow, Russia.
  12. Noghabai, K. (1999), "Discrete versus smeared versus element-embedded crack models on ring problem", J. Eng. Mech., 125(3), 307-315. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:3(307)
  13. Wang, J.A. and Park, H.D. (2002), "Fluid permeability of sedimentary rocks in a complete stress-strain process", Eng. Geol., 63(3), 291-300. https://doi.org/10.1016/S0013-7952(01)00088-6
  14. Wang, X., Wang, M., Zhang, M. and Ming, H. (2008), "Theoretical and experimental study of external water pressure on tunnel lining in controlled drainage under high water level", Tunn. Undergr. Sp. Technol., 23(5), 552-560. https://doi.org/10.1016/j.tust.2007.10.004
  15. Zhang, J.C. (2004), "Investigations of water inrushes from aquifers under coal seams", J. Rock. Mech. Min. Sci., 42(3), 350-360.

피인용 문헌

  1. Numerical analyses of a prefabricated retaining system for foundation pits in silt soils vol.7, pp.3, 2017, https://doi.org/10.1680/jgere.20.00015
  2. Evolution Mechanism, Monitoring, and Early Warning Method of Water Inrush in Deep-Buried Long Tunnel vol.2021, pp.None, 2017, https://doi.org/10.1155/2021/2023782