Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Fire Combustion Characteristics of Membrane Materials According to the Height and Heat Generation Rate

막재료의 설치높이와 발열량에 따른 화재연소특성

  • 조승호 (단국대학교 부설 리모델링연구소) ;
  • 최광호 (남서울대학교 건축공학과) ;
  • 노영숙 (서울과학기술대학교 건축학부 건축공학과)
  • Received : 2016.09.08
  • Accepted : 2016.09.27
  • Published : 2016.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Various form of membrane structures are being built in recent years. However, there is no appropriate fire proofing standards which can be applied each specific membrane structures. Therefore, existing fire protection standards are in establishment state and they need to be revised. In the current study, commonly used membrane materials(ETFE, PVF, PTFE) has been selected to investigate its fire resistance behavior with the change of fire duration time. In addition to this, heat generation rate of the membrane materials in correlation with the height of membrane has been investigated. And these fire combustion characteristics of membrane materials can be used in future practice for the fire prevention regulations of membrane structures.

최근 다양한 형태의 막구조물의 건설이 증가추세이지만 막구조물에 적합하지 않은 내화기준이 적용되어 활용성이 위축되고 있는 실정이다. 그렇기 때문에 막구조물의 건설 활성화에 맞추어서 이에 대한 내화기준의 제 개정이 필요한 상황이다. 따라서 본 연구에서는 일반적으로 많이 사용되는 막재료(ETFE, PVF, PTFE)를 선정하여 막구조물에 화재가 일어났을 때, 시간이 변화함에 따라 온도가 올라가는 막재료의 물리적인 특성 변화와 발열량과 막재료 설치높이와의 상관관계를 파악하여 막구조 내화기준에 기초 자료로 활용하고자 한다.

Keywords

References

  1. Heo, J. E., Jeon, G. Y., and Hong, W. H. (2009), Study on the Fire Risk Assessment in CBD based on the Characteristic Features of Fire Damage. Journal of the Architectural Institute of Korea. Structure & Construction, 22(3), 87-93.
  2. Kang, J. W., and Lee, S. J. (2011), Deterioration Diagnosis of Surface and Coating Layer for Maintenance Managements of the Membrane Structure. Journal of the Korean Association for Spatial Structures, 11(1), 97-104. https://doi.org/10.9712/KASS.2011.11.1.097
  3. Korean Association for Spatial Structures (2010), Design Code and Commentary for Membrane Structures, Kimoondang.
  4. Tensinet Association (1984), European Design Guide for Tensile Surface Structures.
  5. Vincent, B. G., and Khan, M. M. (1994), Full-scale Fire Test of a Tension Supported Membrane Structure, Factory Mutual Research Corporation, Technical Report.
  6. Zhang, L., Zhu, G. Q., Zhu, G. W., and Han, R. S. (2013), Performance-based Fire Design of Air-supported Membrane Coal Storage Shed. Procedia Engineering, 52, 593-601. https://doi.org/10.1016/j.proeng.2013.02.191
  7. Zhang, Y. Y., Zhu, G. Q., and Yang, H. (2013), Experimental Research on Combustion Characteristics of Air-supported Membrane Materials. Procedia Engineering, 52. 624-629. https://doi.org/10.1016/j.proeng.2013.02.196

Cited by

  1. Unconventional Alloys Confined in Nanoparticles: Building Blocks for New Matter vol.3, pp.5, 2020, https://doi.org/10.1016/j.matt.2020.07.027