DOI QR코드

DOI QR Code

Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildings

  • Li, Yizhu (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University) ;
  • Cao, Shuangyin (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University) ;
  • Xue, Jianyang (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2016.02.21
  • 심사 : 2016.10.06
  • 발행 : 2016.12.10

초록

To study the effect of looseness on mechanical behavior of dovetail mortise-tenon joints, five dovetail mortise-tenon joints, including one intact joint and four loose joints, were fabricated and tested under cycle lateral loadings, and non-linear finite element models using the software ABAQUS were also developed. The effects of looseness on stress distribution, rotational stiffness and bearing capacity of joints were studied based on the analysis of test and simulation results. The results indicate that the hysteretic loops are anti-Z-shaped and present typical characteristics of pinching and slippage, the envelop curves of joints are classified as following two stages: elastic and strengthening stage. The peak stress, rotational stiffness and bearing capacity of joints were reduced due to looseness. The moment-rotation theoretical model of intact joint was simplified in terms of the relation of construction dimensions for buildings, and the moment-rotation theoretical model considering the effect of looseness was proposed and validated.

키워드

과제정보

연구 과제 주관 기관 : Chinese National Natural Science Foundation

참고문헌

  1. Bedon, C. and Fragiacomo, M. (2015), "Numerical and analytical assessment of the buckling behaviour of Blockhaus log-walls under in-plane compression", Eng. Struct., 82, 134-150. https://doi.org/10.1016/j.engstruct.2014.10.033
  2. Bedon, C., Fragiacomo, M. and Amadio, C. (2015), "Experimental study and numerical investigation of blockhaus shear walls subjected to in-plane seismic loads", J. Struct. Eng., 141(4), 1-11.
  3. Bedon, C., Rinaldin, G. and Izzi, M. (2015), "Assessment of the structural stability of Blockhaus timber log-walls under in-plane compression via full-scale buckling experiments", Constr. Build. Mater., 78, 474-490. https://doi.org/10.1016/j.conbuildmat.2015.01.049
  4. Branco, J.M. and Araujo, J.P. (2012), "Structural behaviour of log timber walls under lateral in-plane loads", Eng. Struct., 40, 371-382. https://doi.org/10.1016/j.engstruct.2012.03.004
  5. Chang, W.S., Thomson, A. and Harris, R. (2011), "Development of all-wood connections with plywood flitch plate and oak pegs", Adv. Struct. Eng., 14(2), 123-132. https://doi.org/10.1260/1369-4332.14.2.123
  6. Chen, Z.Y. (2010), "Behavior of typical joint and the structure of YingXian wood pagoda", Ph.D. Dissertation, Harbin University of Technology, Harbin, China.
  7. Chinese standard (2005), Timberwork design manual, China Architecture & Building Press, Beijing, China.
  8. Chui, Y.H. and Li, Y.T. (2005), "Modeling timber moment connection under reversed cyclic loading", J. Struct. Eng., 131(11), 1757-1763. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1757)
  9. Chun, Q., Yue, Z. and Pan, J.W. (2011), "Experimental study on seismic characteristics of typical mortise-tenon joints of Chinese southern traditional timber frame buildings", Sci. China: Technol. Sci., 54(9), 2404-2411. https://doi.org/10.1007/s11431-011-4448-3
  10. D'Ayala, D.F. and Tsai, P.H. (2008), "Seismic vulnerability of historic Dieh-Dou timber structures in Taiwan", Eng. Struct., 30, 2101-2113. https://doi.org/10.1016/j.engstruct.2007.11.007
  11. Fang, D.P., Iwasaki, S. and Yu, M.H. (2001), "Ancient Chinese timber architecture. I: experimental study", J. Struct. Eng., 127(11), 1348-1357. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:11(1348)
  12. Fang, D.P., Iwasaki, S. and Yu, M.H. (2001), "Ancient Chinese timber architecture. II: dynamic characteristics", J. Struct. Eng., 127(11), 1358-1364. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:11(1358)
  13. Feio, A.O., Lourenco, P.B. and Machado, J.S. (2014), "Testing and modeling of a traditional timber mortise and tenon joint", Mater. Struct., 47(1), 213-225. https://doi.org/10.1617/s11527-013-0056-y
  14. GB/1927-1943-91 (1991), Physical and mechanical tests of wood, China technical committee for standardization of timber, Beijing, China.
  15. Leichti, R.J., Hyde, R.A. and French M.L. (2000), "The continuum of connection rigidity in timber structures", Wood Fiber Sci., 32(1), 11-19.
  16. Li, X.W., Zhao, J.H. and Ma, G.W. (2015), "Experimental study on the seismic performance of a double-span traditional timber frame", Eng. Struct., 98, 141-150. https://doi.org/10.1016/j.engstruct.2015.04.031
  17. Li, Y.F., Tsai, M.J. and Liao, C.N. (2009), "Effects of tenon depths and bolt constraint conditions on the mechanical behavior of semi-rigid joints of wooden historical buildings", Adv. Struct. Eng., 12(3), 349-358. https://doi.org/10.1260/136943309788708374
  18. Ma, E.N. and Zhao, G.J. (2012), The monograph on physics for wood, China Forestry Press, Beijing, China.
  19. Pang, S.J., Oh, J.K. and Park, J.S. (2011), "Moment-carrying capacity of dovetailed mortise and tenon joints with or without beam shoulder", J. Struct. Eng., 137(7), 785-789. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000323
  20. Parisi, M.A. and Cordie, C. (2010), "Mechanical behavior of double-step timber joints", Constr. Build. Mater., 24(8), 1364-1371. https://doi.org/10.1016/j.conbuildmat.2010.01.001
  21. Sandberg, L.B., Bulleit, W.M. and Reid, E.H. (2000), "Strength and stiffness of oak pegs in traditional timber-frame joints", J. Struct. Eng., 126(6), 717-723. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:6(717)
  22. Santana, C.L.O. and Mascia, N.T. (2009), "Wooden framed structures with semi-rigid connections: quantitative approach focused on design needs", Struct. Eng. Mech., 31(3), 315-331. https://doi.org/10.12989/sem.2009.31.3.315
  23. Tannert, T., Lam, F. and Vallee, T. (2010), "Strength prediction for rounded dovetail connections considering size effects", J. Eng. Mech., 136(3), 358-366. https://doi.org/10.1061/(ASCE)0733-9399(2010)136:3(358)
  24. Villar, J.R., Guaita, M. and Vidal, P. (2007), "Analysis of the stress state at the cogging joint in timber structures", Biosystems Eng., 96(1), 79-90. https://doi.org/10.1016/j.biosystemseng.2006.09.009
  25. Xie, Q.F., Du, B. and Zhang, F.L. (2014), "Theoretical analysis on moment-rotation relationship of dovetail joints for Chinese ancient timber structure buildings", Eng. Mech., 31(12), 140-146.
  26. Zhang, X.C., Xue, J.Y. and Zhao, H.T. (2011), "Study on Chinese ancient timber-frame building by shaking table test", Struct. Eng. Mech., 40(4), 453-469. https://doi.org/10.12989/sem.2011.40.4.453

피인용 문헌

  1. Rotational behavior of degraded traditional mortise-tenon joints: experimental tests and hysteretic model 2017, https://doi.org/10.1080/15583058.2017.1390629
  2. Study on mechanical behaviors of column foot joint in traditional timber structure vol.66, pp.1, 2018, https://doi.org/10.12989/sem.2018.66.1.001
  3. Damage Detection of Common Timber Connections Using Piezoceramic Transducers and Active Sensing vol.19, pp.11, 2016, https://doi.org/10.3390/s19112486
  4. Experimental and numerical studies on cyclic behavior of continuous-tenon joints in column-and-tie timber construction vol.75, pp.5, 2016, https://doi.org/10.12989/sem.2020.75.5.529
  5. Analysis of Longitudinal Timber Beam Joints Loaded with Simple Bending vol.12, pp.21, 2016, https://doi.org/10.3390/su12219288
  6. Study on the mechanical behaviors of timber frame with the simplified column foot joints vol.77, pp.3, 2021, https://doi.org/10.12989/sem.2021.77.3.383
  7. Study on mechanical behaviors of loose mortise-tenon joint with neighbouring gap vol.77, pp.4, 2016, https://doi.org/10.12989/sem.2021.77.4.509
  8. Image perception for adolescent of mortise-and-tenon joints in wooden buildings vol.12, pp.1, 2016, https://doi.org/10.1080/20426445.2020.1827860
  9. Seismic Resistance of Timber Frames with Mud and Stone Infill Walls in a Chinese Traditional Village Dwelling vol.11, pp.12, 2021, https://doi.org/10.3390/buildings11120580
  10. Seismic Performance Evaluation for a Traditional Chinese Timber-frame Structure vol.15, pp.12, 2016, https://doi.org/10.1080/15583058.2020.1731626