참고문헌
- Ra, S. W. and Park, K., 2015, "Recent Trends in Developing Subminiature Screw Parts," Proc. KSPE Spring Conf., pp. 1224.
- Min, K. B., Kim, J. B., Park, K. and Ra, S. W., 2014, "Evaluation of Clamping Characteristics for Subminiature Screws According to Thread Angle Variation," J. Korean. Soc. Precis. Eng., Vol. 31, No. 9, pp. 839-846. https://doi.org/10.7736/KSPE.2014.31.9.839
- Lee, J. E., Kim, J. B. and Park, K., 2015, "Finite Element Analysis for Improvement of Folding Defects in the Forging Process of Subminiature Screws," J. Korean. Soc. Precis. Eng., Vol. 32, No. 6, pp. 509-515. https://doi.org/10.7736/KSPE.2015.32.6.509
- Domblesky, J. P. and Feng, F., 2002, "A Parametric Study of Process Parameters in External Thread Rolling," J. Mater. Process. Technol., Vol. 121, No. 2-3, pp. 341-349. https://doi.org/10.1016/S0924-0136(01)01223-7
- Park, K. D., Song, J. H., Lee, G. A., Lee, N. K., Lee, H. W. and Ra, S. W., 2009, "Simulation Based Process Design of Flat Die Thread Rolling for Micro Screw," Trans. Mater. Process, pp. 62-65.
- Song, J. H., Lee, J., Lee, H. J., Lee, G. A., Park, K. D., Ra, S. W. and Lee, H. W., 2011, "Analysis and Experiments on the Thread Rolling Process for Micro-Sized Screws (Part I: Process Parameter Analysis by Finite-Element Simulation)," Trans. Mater. Process, Vol. 20, No. 8, pp. 581-587. https://doi.org/10.5228/KSTP.2011.20.8.581
-
Song, J. H., Lee, J., Lee, H. J., Lee, G. A., Park, K. D., Ra, S. W. and Lee, H. W., 2012, "Numerical Analysis and Experimental Study of Thread Rolling Process for Micro-sized Screw (PartII: Application to a Microscrew with Diameter of
$800{\mu}m$ )," Trans. Mater. Process, Vol. 21, No. 3, pp. 179-185. https://doi.org/10.5228/KSTP.2012.21.3.179 - Jang, S. J., Lee, M. C., Shim, S. H., Son, Y. H., Yoon, D. J. and Joun, M. S., 2010, "Finite Element Analysis of Manufacturing Process of 12 Point Flange Head Bolt with Emphasis on Thread Rolling Process," Trans. Mater. Process, Vol. 19, No. 4, pp. 248-252. https://doi.org/10.5228/KSPP.2010.19.4.248
- Shin, M. S., Cha, S. H. and Kim, J. B., 2010, "Prediction of Crack Initiation and Its Application to the Design of Lead Screw Thread Rolling Process," Trans. Mater. Process, Vol. 19, No. 3, pp. 160-166. https://doi.org/10.5228/KSPP.2010.19.3.160
- Lee, H. W., Song, J. H., Lee, G. A., Lee, H. J., Park, K. D. and Bae, S. M., 2011, "Thread Forming of a Micro Screw for Storage Device using Finite Element Analysis," Adv. Mater. Research, Vol. 264, pp. 1613-1618.
- Kao, Y. C., Cheng, H. Y. and She, C. H., 2006, "Development of an Integrated CAD/CAE/CAM System on Taper-tipped Thread-rolling Die-plates," J. Mater. Process. Technol, Vol. 177, No. 1-3, pp. 98-103. https://doi.org/10.1016/j.jmatprotec.2006.04.082
- Peter, Z., Gontarz, A. and Weronski, W., 2004, "New Method of Thread Rolling," J. Mater. Process. Technol, Vol. 153-154, pp. 722-728. https://doi.org/10.1016/j.jmatprotec.2004.04.154
- Hwang, Y. M., Hwang, K. N. and Chang, C. Y., 2013, "Study on Heading and Thread-rolling Processes of Magnesium Alloy Screws," Key Engineering Materials, Vol. 535-536, pp. 322-325. https://doi.org/10.4028/www.scientific.net/KEM.535-536.322
- KS B 0211, Limits of Sizes and Tolerances for Metric Coarse Screw Threads, 2012
- ISO, 1984, ISO Standards Handbook 18 Fasteners and Screw Threads, ISO, Switzerland, pp. 72-76.