DOI QR코드

DOI QR Code

Developing a smart structure using integrated DDA/ISMP and semi-active variable stiffness device

  • Karami, Kaveh (Faculty of Department of Civil Engineering, University of Kurdistan) ;
  • Nagarajaiah, Satish (Faculty of Departments of Civil and Environmental Engineering, and Mechanical Engineering and Material Science, Rice University) ;
  • Amini, Fereidoun (Faculty of School of Civil Engineering, Iran University of Science & Technology)
  • 투고 : 2015.12.29
  • 심사 : 2016.08.23
  • 발행 : 2016.11.25

초록

Recent studies integrating vibration control and structural health monitoring (SHM) use control devices and control algorithms to enable system identification and damage detection. In this study real-time SHM is used to enhance structural vibration control and reduce damage. A newly proposed control algorithm, including integrated real-time SHM and semi-active control strategy, is presented to mitigate both damage and seismic response of the main structure under strong seismic ground motion. The semi-active independently variable stiffness (SAIVS) device is used as semi-active control device in this investigation. The proper stiffness of SAIVS device is obtained using a new developed semi-active control algorithm based on real-time damage tracking of structure by damage detection algorithm based on identified system Markov parameters (DDA/ISMP) method. A three bay five story steel braced frame structure, which is equipped with one SAIVS device at each story, is employed to illustrate the efficiency of the proposed algorithm. The obtained results show that the proposed control algorithm could significantly decrease damage in most parts of the structure. Also, the dynamic response of the structure is effectively reduced by using the proposed control algorithm during four strong earthquakes. In comparison to passive on and off cases, the results demonstrate that the performance of the proposed control algorithm in decreasing both damage and dynamic responses of structure is significantly enhanced than the passive cases. Furthermore, from the energy consumption point of view the maximum and the cumulative control force in the proposed control algorithm is less than the passive-on case, considerably.

키워드

참고문헌

  1. Amini, F. and Karami, K. (2011), "Capacity design by developed pole placement structural control", Struct. Eng. Mech., 39(1), 147-168. https://doi.org/10.12989/sem.2011.39.1.147
  2. Amini, F. and Karami, K. (2012), "Damage detection algorithm based on identified system Markov parameters (DDA/ISMP) in building structures with limited sensors", Smart Mater. Struct., 21(5), 055010. https://doi.org/10.1088/0964-1726/21/5/055010
  3. Amini, F., Mohajeri, S.A. and Javanbakht, M. (2015), "Semi-active control of isolated and damaged structures using online damage detection", Smart Mater. Struct., 24(10), 105002. https://doi.org/10.1088/0964-1726/24/10/105002
  4. Bitaraf, M., Barroso, L.R. and Hurlebaus, S. (2010), "Adaptive control to mitigate damage impact on structural response", J. Intel. Mat. Syst. Str., 21, 607-619. https://doi.org/10.1177/1045389X10361993
  5. Cha, Y.J. and Buyukozturk, O. (2015), "Structural damage detection using modal strain energy and hybrid multiobjective optimization", Comput. - Aided Civil Infrastruct. E., 30(5), 347-358. https://doi.org/10.1111/mice.12122
  6. Chen, B., Xu, Y. and Zhao, X. (2010), "Integrated vibration control and health monitoring of building structures: a time-domain approach", Smart Struct. Syst., 6(7), 811-833. https://doi.org/10.12989/sss.2010.6.7.811
  7. Chopra, A.K. (1995), Dynamics of Structures, Prentice Hall, New Jersey,USA.
  8. Chu, S.Y. and Lo, S.C. (2009), "Application of real-time adaptive identification technique on damage detection and structural health monitoring", Struct. Control Health Monit., 16(2), 154-177. https://doi.org/10.1002/stc.304
  9. Gattulli, V. and Romeo, F. (2000), "Integrated procedure for identification and control of MDOF structures", J. Eng. Mech. - ASCE, 126(7), 730-737. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(730)
  10. Huang, Q., Xu, Y.L., Li, J.C., Su, Z.Q. and Liu, H.J. (2012), "Structural damage detection of controlled building structures using frequency response functions", J. Sound Vib., 331(15), 3476-3492. https://doi.org/10.1016/j.jsv.2012.03.001
  11. Juang, J.N. (1994), Applied System Identification, Prentice Hall, Michigan,USA.
  12. Juang, J.N., Phan, M., Horta, L.G. and Longman, R.W. (1993), "Identification of observer/Kalman filter Markov parameters-Theory and experiments", J. Guid.Control Dynam., 16(2), 320-329. https://doi.org/10.2514/3.21006
  13. Karami, K. and Akbarabadi, S. (2016), "Developing a smart structure using integrated subspace-based damage detection and semi-active control", Comput. - Aided Civil Infrastruct. E., 31(11), November 2016. DOI: 10.1111/mice.12231
  14. Karami, K. and Amini, F. (2012), "Decreasing the damage in smart structures using integrated online DDA/ISMP and semi-active control", Smart Mater. Struct., 21(10), 105017. https://doi.org/10.1088/0964-1726/21/10/105017
  15. Kim, M.H. (2002), "Simultaneous structural health monitoring and vibration control of adaptive structures using smart materials", Shock Vib., 9(6), 329-339. https://doi.org/10.1155/2002/264158
  16. McGuire, W., Gallagher, R.H. and Ziemian, R.D. (2000), Matrix Structural Analysis, Wiley.
  17. Nagarajaiah, S. (2000), "Structural vibration damper with continuously variable stiffness", U.S. Patent 6098969.
  18. Nagarajaiah, S. and Sahasrabudhe, S. (2006), "Seismic response control of smart sliding isolated buildings using variable stiffness systems: an experimental and numerical study", Earthq. Eng. Struct. D., 35(2), 177-198. https://doi.org/10.1002/eqe.514
  19. Nagarajaiah, S. and Sonmez, E. (2007), "Structures with semiactive variable stiffness single/multiple tuned mass dampers", J. Struct. Eng. - ASCE, 133(1), 66-77.
  20. Nagarajaiah, S. and Varadarajan, N. (2005), "Short time Fourier transform algorithm for wind response control of buildings with variable stiffness TMD", Eng. Struct., 27(3), 431-441. https://doi.org/10.1016/j.engstruct.2004.10.015
  21. Narasimhan, S. and Nagarajaiah, S. (2005), "A STFT semiactive controller for base isolated buildings with variable stiffness isolation systems", Eng. Struct., 27(4), 514-523. https://doi.org/10.1016/j.engstruct.2004.11.010
  22. O'Byrne, M., Ghosh, B., Schoefs, F. and Pakrashi, V. (2014), "Regionally enhanced multiphase segmentation technique for damaged surfaces", Comput. -Aided Civil Infrastruct. E. 29(9), 644-658. https://doi.org/10.1111/mice.12098
  23. Ray, L.R., Koh, B.H. and Tian, L. (2000), "Damage detection and vibration control in smart plates: towards multifunctional smart structures", J. Intel. Mat. Syst. Str., 11(9), 725-739. https://doi.org/10.1177/104538900772663946
  24. Ray, L.R. and Tian, L. (1999), "Damage detection in smart structures through sensitivity-enhancing feedback control", Proceedings of the 1999 Symposium on Smart Structures and Materials. International Society for Optics and Photonics.
  25. Sun, D. and Tong, L. (2003), "Closed-loop based detection of debonding of piezoelectric actuator patches in controlled beams", Int. J. Solids Struct., 40(10), 2449-2471. https://doi.org/10.1016/S0020-7683(03)00080-5
  26. Sun, H., Feng, D., Liu, Y. and Feng, M.Q. (2015), "Statistical regularization for identification of structural parameters and external loadings using state space models", Comput. - Aided Civil Infrastruct, E., 30(11), 843-858. https://doi.org/10.1111/mice.12169
  27. Varadarajan, N. and Nagarajaiah, S. (2004), "Wind response control of building with variable stiffness tuned mass damper using empirical mode decomposition/Hilbert transform", J. Eng. Mech. - ASCE, 130(4), 451-458. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:4(451)
  28. Viscardi, M. and Lecce, L. (2002), "An integrated system for active vibro-acoustic control and damage detection on a typical aeronautical structure", Control Applications, 2002. Proceedings of the 2002 International Conference on. IEEE.
  29. Xu, Y. and Chen, B. (2008), "Integrated vibration control and health monitoring of building structures using semi-active friction dampers: Part I-methodology", Eng. Struct., 30(7), 1789-1801. https://doi.org/10.1016/j.engstruct.2007.11.013

피인용 문헌

  1. Realization of Artificial Nonlinear Spring with Controllable Stiffness vol.09, pp.08, 2017, https://doi.org/10.1142/S1758825117501198
  2. On‐line system identification of structures using wavelet‐Hilbert transform and sparse component analysis vol.35, pp.8, 2016, https://doi.org/10.1111/mice.12552
  3. Seismic motion control of structures using an adaptive optimal model-free controller vol.27, pp.19, 2021, https://doi.org/10.1177/1077546320960579