DOI QR코드

DOI QR Code

Confined concrete model of circular, elliptical and octagonal CFST short columns

  • Patel, Vipulkumar I. (School of Engineering and Mathematical Sciences, College of Science, Health and Engineering, La Trobe University) ;
  • Uy, Brian (School of Civil Engineering, The University of Sydney) ;
  • Prajwal, K.A. (Department of Civil Engineering, Indian Institute of Technology Bombay) ;
  • Aslani, Farhad (Centre for Infrastructure Engineering and Safety, School of Civil and Environmental Engineering, The University of New South Wales)
  • 투고 : 2016.02.23
  • 심사 : 2016.10.13
  • 발행 : 2016.10.30

초록

The confined concrete stress-strain curves utilised in computational models of concrete-filled steel tubular (CFST) columns can have a significant influence on the accuracy of the predicted behaviour. A generic model is proposed for predicting the stress-strain behaviour of confined concrete in short circular, elliptical and octagonal CFST columns subjected to axial compression. The finite element (FE) analysis is carried out to simulate the concrete confining pressure in short circular, elliptical and octagonal CFST columns. The concrete confining pressure relies on the geometric and material parameters of CFST columns. The post-peak behaviour of the concrete stress-strain curve is determined using independent existing experimental results. The strength reduction factor is derived for predicting the descending part of the confined concrete behaviour. The fibre element model is developed for the analysis of circular, elliptical and octagonal CFST short columns under axial loading. The FE model and fibre element model accounting for the proposed concrete confined model is verified by comparing the computed results with experimental results. The ultimate axial strengths and complete axial load-strain curves obtained from the FE model and fibre element model agree reasonably well with experimental results. Parametric studies have been carried out to examine the effects of important parameters on the compressive behaviour of short circular, elliptical and octagonal CFST columns. The design model proposed by Liang and Fragomeni (2009) for short circular, elliptical and octagonal CFST columns is validated by comparing the predicted results with experimental results.

키워드

참고문헌

  1. ACI-318-11 (2011), Building code requirements for structural concrete and commentary ACI Committee 318, Detroit, MI, USA.
  2. Aslani, F., Uy, B., Tao, Z. and Mashiri, F. (2015a), "Behaviour and design of composite columns incorporating compact high-strength steel plates", J. Constr. Steel Res., 107, 94-110. https://doi.org/10.1016/j.jcsr.2015.01.005
  3. Aslani, F., Uy, B., Tao, Z. and Mashiri, F. (2015b), "Predicting the axial load capacity of high-strength concrete filled steel tubular columns", Steel Compos. Struct., Int. J., 19(4), 967-993. https://doi.org/10.12989/scs.2015.19.4.967
  4. Dai, X. and Lam, D. (2010), "Numerical modelling of the axial compressive behaviour of short concretefilled elliptical steel columns", J. Constr. Steel Res., 66(7), 931-942. https://doi.org/10.1016/j.jcsr.2010.02.003
  5. Ellobody, E. (2013), "A consistent nonlinear approach for analysing steel, cold-formed steel, stainless steel and composite columns at ambient and fire conditions", Thin-Wall. Struct., 68, 1-17. https://doi.org/10.1016/j.tws.2013.02.016
  6. Furlong, R.W. (1967), "Strength of steel-encased concrete beam columns", J. Struct. Div., ASCE, 93(5), 113-124.
  7. Giakoumelis, G. and Lam, D. (2004), "Axial capacity of circular concrete-filled steel tube columns", J. Constr. Steel Res., 60(7), 1049-1068. https://doi.org/10.1016/j.jcsr.2003.10.001
  8. Han, L.H., Yao, G.H. and Zhao, X.L. (2005), "Tests and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (SCC)", J. Construct. Steel Res., 61(9), 1241-1269. https://doi.org/10.1016/j.jcsr.2005.01.004
  9. Han, L.H., Li, W. and Bjorhovde, R. (2014), "Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members", J. Constr. Steel Res., 100, 211-228. https://doi.org/10.1016/j.jcsr.2014.04.016
  10. Hu, H.T., Huang, C.S., Wu, M. and Wu, Y. (2003), "Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect", J. Struct. Eng. ASCE, 129(10), 1322-1329. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1322)
  11. Jamaluddin, N., Lam, D., Dai, X.H. and Ye, J. (2013), "An experimental study on elliptical concrete filled columns under axial compression", J. Construct. Steel Res., 87, 6-16. https://doi.org/10.1016/j.jcsr.2013.04.002
  12. Kloppel, V.K. and Goder, W. (1957), "An investigation of the load carrying capacity of concrete filled steel tubes and development of design formula", Der Stahlbau, 26(2), 44-50.
  13. Knowles, R.B. and Park, R. (1969), "Strength of concrete filled steel tubular columns", J. Struct. Div., ASCE, 95(12), 2565-2588.
  14. Liang, Q.Q. (2009), "Performance-based analysis of concrete-filled steel tubular beam-columns, Part I: Theory and algorithms", J. Constr. Steel Res., 65(2), 363-372. https://doi.org/10.1016/j.jcsr.2008.03.007
  15. Liang, Q.Q. (2014), Analysis and Design of Steel and Composite Structures, Boca Raton and London, CRC Press, Taylor and Francis Group.
  16. Liang, Q.Q. and Fragomeni, S. (2009), "Nonlinear analysis of circular concrete-filled steel tubular short columns under axial loading", J. Constr. Steel Res., 65(12), 2186-2196. https://doi.org/10.1016/j.jcsr.2009.06.015
  17. Mander, J.B., Priestly, M.N.J. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng. ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  18. O'Shea, M.D. and Bridge, R.Q. (1998), "Tests on circular thin-walled steel tubes filled with medium and high strength concrete", Austral. Civil Eng. Transact., 40, 15-27.
  19. Patel, V.I., Liang, Q.Q. and Hadi, M.N.S. (2014), "Nonlinear analysis of axially loaded circular concretefilled stainless steel tubular short columns", J. Constr. Steel Res., 101, 9-18. https://doi.org/10.1016/j.jcsr.2014.04.036
  20. Patel, V.I., Liang, Q.Q. and Hadi, M.N.S. (2015), Nonlinear Analysis of Concrete-Filled Steel Tubular Columns, Scholars' Press, Germany.
  21. Persson, P.O. and Strang, G. (2004), "A simple mesh generator in Matlab", SIAM Review, 46(2), 329-345. https://doi.org/10.1137/S0036144503429121
  22. Puri, G.M. (2011), Python Scripts for Abaqus Learn by Example, Dassault Systemes Simulia Corporation.
  23. Ren, Q.X., Han, L.H., Lam, D. and Hou, C. (2014), "Experiments on special-shaped CFST stub columns under axial compression", J. Constr. Steel Res., 98, 123-133. https://doi.org/10.1016/j.jcsr.2014.03.002
  24. Richart, F.E., Bradtzaeg, A. and Brown, R.L. (1928), "A study of the failure of concrete under combined compressive stresses", Bulletin 185, University of Illionis, Engineering Experimental Station, Champaign (III), IL, USA.
  25. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng. ASCE, 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  26. Schneider, S.P. (1998), "Axially loaded concrete-filled steel tubes", J. Struct. Eng. ASCE, 124(10), 1125-1138. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1125)
  27. Shams, M. and Saadeghvaziri, M.A. (1997), "State of the art of concrete-filled steel tubular columns", ACI Struct. J., 94(5), 558-571.
  28. Shanmugam, N.S. and Lakshmi, B. (2001), "State of the art report on steel-concrete composite columns", J. Constr. Steel Res., 57(10), 1041-1080. https://doi.org/10.1016/S0143-974X(01)00021-9
  29. Spacone, E. and El-Tawil, S. (2004), "Nonlinear analysis of steel-concrete composite structures: State of the art", J. Struct. Eng. ASCE, 130(2), 159-168. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(159)
  30. Susantha, K.A.S., Ge, H.B. and Usami, T. (2001), "Uniaxial stress-strain relationship of concrete confined by various shaped steel tubes", Eng. Struct., 23(10), 1331-1347. https://doi.org/10.1016/S0141-0296(01)00020-7
  31. Tang, J., Hino, S., Kuroda, I. and Ohta, T. (1996), "Modeling of stress-strain relationships for steel and concrete in concrete filled circular steel tubular columns", Steel Construct. Eng. JSSC, 3(11), 35-46.
  32. Tao, Z., Wang, Z.B. and Yu, Q. (2013), "Finite element modelling of concrete-filled steel stub columns under axial compression", J. Constr. Steel Res., 89, 121-131. https://doi.org/10.1016/j.jcsr.2013.07.001
  33. Tomii, M., Yoshimura, K. and Morishita, Y. (1977), "Experimental studies on concrete filled steel tubular stub columns under concentric loading", International Colloquium on Stability of Structures under Static and Dynamic Loads, Washington, D.C., USA, pp. 718-741.
  34. Uenaka, K. (2014), "Experimental study on concrete filled elliptical/oval steel tubular stub columns under compression", Thin-Wall. Struct., 78, 131-137. https://doi.org/10.1016/j.tws.2014.01.023
  35. Uy, B., Tao, Z. and Han, L.H. (2011), "Behaviour of short and slender concrete-filled stainless steel tubular columns", J. Constr. Steel Res., 67(3), 360-378. https://doi.org/10.1016/j.jcsr.2010.10.004
  36. Yang, H., Lam, D. and Gardner, L. (2008), "Testing and analysis of concrete-filled elliptical hollow sections", Eng. Struct., 30(12), 3771-3781. https://doi.org/10.1016/j.engstruct.2008.07.004
  37. Zhao, X.L. and Packer, J.A. (2009), "Tests and design of concrete-filled elliptical hollow section stub columns", Thin-Wall. Struct., 47(6-7), 617-628. https://doi.org/10.1016/j.tws.2008.11.004

피인용 문헌

  1. Finite element analysis of large diameter high strength octagonal CFST short columns vol.123, 2018, https://doi.org/10.1016/j.tws.2017.11.007
  2. Thin-Walled CFST Columns for Enhancing Seismic Collapse Performance of High-Rise Steel Frames vol.7, pp.12, 2017, https://doi.org/10.3390/app7010053
  3. Behaviour of axially loaded circular concrete-filled bimetallic stainless-carbon steel tubular short columns vol.147, 2017, https://doi.org/10.1016/j.engstruct.2017.05.064
  4. Behavior of fibre reinforced cementitious material-filled steel tubular columns vol.23, pp.4, 2017, https://doi.org/10.12989/scs.2017.23.4.465
  5. Composite action of hollow concrete-filled circular steel tubular stub columns vol.26, pp.6, 2016, https://doi.org/10.12989/scs.2018.26.6.693
  6. Experimental study on creep behavior of fly ash concrete filled steel tube circular arches vol.27, pp.2, 2016, https://doi.org/10.12989/scs.2018.27.2.185
  7. Structural behaviour and design of elliptical high-strength concrete-filled steel tubular short compression members vol.173, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.07.023
  8. Simulation of Performance of CFST Elements Containing Differentiated Profile Tubes Filled with Reinforced Concrete vol.968, pp.None, 2019, https://doi.org/10.4028/www.scientific.net/msf.968.281
  9. Behavior of an Innovative Square Composite Column Made of Four Steel Tubes at the Corners and Corrugated Steel Batten Plates on all Sides vol.2019, pp.None, 2016, https://doi.org/10.1155/2019/2971962
  10. Square CFST columns under cyclic load and acid rain attack: Experiments vol.30, pp.2, 2016, https://doi.org/10.12989/scs.2019.30.2.171
  11. Compressive strengths of concrete-filled double-skin (circular hollow section outer and square hollow section inner) aluminium tubular sections vol.22, pp.11, 2016, https://doi.org/10.1177/1369433219842381
  12. Compressive behaviours of circular concrete-filled steel tubes exposed to low-temperature environment vol.245, pp.None, 2016, https://doi.org/10.1016/j.conbuildmat.2020.118460
  13. The effects of cross-sectional shapes on the axial performance of concrete-filled steel tube columns vol.176, pp.None, 2021, https://doi.org/10.1016/j.jcsr.2020.106424
  14. Experimental and numerical analysis of circular concrete-filled double steel tubular stub columns with inner square hollow section vol.227, pp.None, 2021, https://doi.org/10.1016/j.engstruct.2020.111400
  15. Behavior of hexagonal multicell CFST columns under lateral cyclic loads: Experimental study vol.230, pp.None, 2016, https://doi.org/10.1016/j.engstruct.2020.111700
  16. Compressive strength of circular concrete filled steel tubular stubs strengthened with CFRP vol.39, pp.2, 2016, https://doi.org/10.12989/scs.2021.39.2.189
  17. Numerical analysis on concrete-filled wide rectangular steel tubular (CFWRST) stub columns under axial compression vol.34, pp.None, 2016, https://doi.org/10.1016/j.istruc.2021.10.074