DOI QR코드

DOI QR Code

Study on Integrated Workflow for Designing Sustainable Tall Building - With Parametric method using Rhino Grasshopper and DIVA for Daylight Optimization

  • Kim, Hyeong-ill (Dept. of Architecture, National University of Singapore)
  • 투고 : 2016.09.19
  • 심사 : 2016.10.24
  • 발행 : 2016.10.31

초록

Purpose: The Objective of this study is to explore the capabilities of an integrated modelling and simulation workflow when applied to an experiment-based research process, aimed at deriving daylight optimization strategies specific to tall buildings. Methods: Two methods were devised to apply this workflow with the help of DIVA and Rhino/Grasshopper. The first method is a multiple variant analysis by setting up an appropriate base case and analysing its daylight and energy performance, forming the basis of comparison for subsequent cases for design variants. The second method involved setting up the base case within a site context and conducting a solar irradiation study. An architectural variables such as overhang and shading device, were then defined as inputs in the parametric definition in Grasshopper to control the selected variable. Results: While the first method took advantage of the speed and efficiency of the integrated workflow, the second method was derived based on the ability to directly process simulation data within the integrated, single-software platform of the proposed workflow. Through these methods, different architectural strategies were explored, both to increase daylight penetration and to reduce radiant heat gain. The focus is on methods by which this workflow can be applied to facilitate the experimental derivation of daylight optimization strategies that are specific to tall building design.

키워드

참고문헌

  1. CTBUH, "2011: A Tall Building Review." CTBUH Journal, no.2012 (1), 2012
  2. Pank, W., et al., Tall Buildings and Sustainability, Corporation of London, 2002
  3. Ander, G., Daylighting Performance and Design. New York: Van Nostrand Reinhold. p.1, 1995
  4. Gonclaves, J., The Environmental Performance of Tall Buildings: Earthscan, 2010
  5. Niemasz, J., Diva for Rhino-Environmental analysis for buildings, Available from http://diva4rhino.com/
  6. Clair, P., The Climate of Tall Buildings: An Investigation of Building Height in Bio-climatic Design. p. 6, 2010
  7. Richman, E., "Requirements for Lighting Levels.", Toolbox, The Engineering. Illuminance-Recommended Light Levels, 2010, Available from http://www.engineeringtoolbox.com/
  8. Bechthold, M., et al., Integrated Environmental Design and Robotic Fabrication Workflow for Ceramic Shading Systems, the proceedings of ISAAC, 2010
  9. Lagios, K., et al., Animated Building Performance Simulation (ABPS)-Linking Rhinoceros/Grasshopper with Radiance/Daysim. the proceedings of SimBuild, New York, 2010
  10. Niemasz, Jeff. Diva for Rhino-Environmental analysis for buildings. Available from http://diva4rhino.com/
  11. UTO, Geco, 2012, Available at http://www.food4rhino.com/project/geco?ufh
  12. Marvin, M., et al., Gerilla: Grasshopper to EnergyPlus, 2011, Available at http://www.architexted.com/gerilla-grasshopper-to-energyplus/
  13. Lockyear, B., Heliotrope, 2012, Available at http://www.grasshopper3d.com/group/heliotrope