참고문헌
- S. P. Breton and G. Moe, Status, plans and technologies for offshore wind turbines in Europe and North America, Renew. Energ., 34 (2009) 646-654. https://doi.org/10.1016/j.renene.2008.05.040
- B. Snyder and M. J. Kaiser, Ecological and economic cost-benefit analysis of offshore wind energy, Renew. Energ., 34 (2009) 1567-1578. https://doi.org/10.1016/j.renene.2008.11.015
- X. Sun, D. Huang and G. Wu, The current state of offshore wind energy technology development, Energy, 41 (2012) 298-312. https://doi.org/10.1016/j.energy.2012.02.054
- S. J. Kim, Apparatus on corrosion protection and marine corrosion of ship, J. Kor. Inst. Surf. Eng., 44 (2011) 105-116. https://doi.org/10.5695/JKISE.2011.44.3.105
- Ministry of ocean and fisheries, Design standards for harbor and fishery port (2014) 402.
- S. K. Chang, Evaluation of atmospheric corrosion for metals, J. Kor. Inst. Surf. Eng., 30 (1997) 69-82.
- S. K. Jang, S. J. Lee, J. C. Park and S. J. Kim, Evaluation of corrosion tendency for S355ML steel with seawater temperature, Corros. Sci. Technol., 14 (2015) 232-238. https://doi.org/10.14773/cst.2015.14.5.232
-
B. Ingham, M. Ko, G. Kear, P. Kappen, N. Laycock, J. A. Kimpton and D. E. Williams, In situ synchrotron X-ray diffraction study of surface scale formation during
$CO_2$ corrosion of carbon steel at temperatures up to$90^{\circ}C$ , Corros. Sci., 52 (2010) 3052-3061. https://doi.org/10.1016/j.corsci.2010.05.025 - A. Poursaee and C. M. Hansson, Potential pitfalls in assessing chloride-induced corrosion of steel in concrete, Cement. Concrete Res., 39 (2009) 391-400. https://doi.org/10.1016/j.cemconres.2009.01.015
- Z. Shi, J. Jia and A. Atrens, Galvanostatic anodic polarisation of WE43, J. Magnesium Alloys, 2 (2014) 197-202. https://doi.org/10.1016/j.jma.2014.09.002
- R. W. Revie and H. H. Uhlig, Corrosion and corrosion control, John Wiley & Sons, Hoboken, New Jersey (2008) 68.
- E. S. M. Sherif, A comparative study on the electrochemical corrosion behavior of iron and X-65 steel in 4.0 wt% sodium chloride solution after different exposure intervals, Molecules, 19 (2014) 9962-9974. https://doi.org/10.3390/molecules19079962
- P. K. Srivastava, R. Srivastava and P. K. Barhai, High rate of anodic dissolution of iron work piece during electrochemical machining, Int. J. Mech. Eng., 41 (2013) 1110-1116.
- I. M. Dmytrakh and O. A. Ezers'ka, Mechanism and stages of the electrochemical dissolution of metals in the vicinity of the crack tip, Mater. Sci., 31 (1996) 337-342. https://doi.org/10.1007/BF00558556
- C. Alonso, C. Andrade, J. Rodriguez and J. M. Diez, Factors controlling cracking of concrete affected by reinforcement corrosion, Mater. Struct., 31 (1998) 435-441. https://doi.org/10.1007/BF02480466
- K. Videm, A. Dugstad and L. Lunde, Parametric study of CO2 corrosion of carbon steel, Corrosion/94, paper no. 14 (1994).
- T. D. Clark, An analysis of microstructure and corrosion resistance in underwater friction stir welded 304L stainless steel, Brigham Young University, (2005).