참고문헌
- Haralur SB, Al-Dowah OS, Gana NS, Al-Hytham A. Effect of alginate chemical disinfection on bacterial count over gypsum cast. J Adv Prosthodont 2012;4:84-8. https://doi.org/10.4047/jap.2012.4.2.84
- Doubleday B. Impression materials. Br J Orthod 1998;25:133-40. https://doi.org/10.1093/ortho/25.2.133
- Cook W. Alginate dental impression materials: chemistry, structure, and properties. J Biomed Mater Res 1986;20:1-24. https://doi.org/10.1002/jbm.820200103
- Inoue K, Song YX, Kamiunten O, Oku J, Terao T, Fujii K. Effect of mixing method on rheological properties of alginate impression materials. J Oral Rehabil 2002;29:615-9. https://doi.org/10.1046/j.1365-2842.2002.00726.x
- Re D, De Angelis F, Augusti G, Augusti D, Caputi S, D'Amario M, D'Arcangelo C. Mechanical properties of elastomeric impression materials: An in vitro comparison. Int J Dent 2015;2015:428286.
- American National Standard/American Dental Association Specification No. 18. Alginate Impression Materials, 1992.
- Vrijhoef MM, Battistuzzi PG. Tear energy of impression materials. J Dent 1986;14:175-7. https://doi.org/10.1016/0300-5712(86)90021-7
- Wilson HJ. Some properties of alginate impression materials relevant to clinical practice. Br Dent J 1966;121:463-7.
- Jorgensen KD. A new method of recording the elastic recovery of dental impression materials. Scand J Dent Res 1976;84:175-82.
- Frey G, Lu H, Powers J. Effect of mixing methods on mechanical properties of alginate impression materials. J Prosthodont 2005;14:221-5. https://doi.org/10.1111/j.1532-849X.2005.00047.x
- Caswell CW, von Gonten AS, Meng TR. Volumetric proportioning techniques for irreversible hydrocolloids: a comparative study. J Am Dent Assoc 1986;112:859-61. https://doi.org/10.14219/jada.archive.1986.0099
- Tufekci K, Kayacan R, Kurbanoglu C. Effects of gamma radiation sterilization and strain rate on compressive behavior of equine cortical bone. J Mech Behav Biomed Mater 2014;34:231-42. https://doi.org/10.1016/j.jmbbm.2014.02.004
- Sneed WD, Miller R, Olson J. Tear strength of ten elastomeric impression materials. J Prosthet Dent 1983;49:511-3. https://doi.org/10.1016/0022-3913(83)90313-X
- Hondrum SO. Tear and energy properties of three impression materials. Int J Prosthodont 1994;7:517-21.
- Chai J, Takahashi Y, Lautenschlager EP. Clinically relevant mechanical properties of elastomeric impression materials. Int J Prosthodont 1998;11:219-23.
- Webber RL, Ryge G. The determination of tear energy of extensible materials of dental interest. J Biomed Mater Res 1968;2:281-96. https://doi.org/10.1002/jbm.820020302
- ADA, Specification no. 19 for dental elastomeric impression material. Revised ANSI/ADA Specification no. 18-2004, Council on Dental Materials, Instruments, and Equipment.
- Lee YK, Lim BS, Kim CW. Effect of fluoride addition on the properties of dental alginate impression materials. J Mater Sci Mater Med 2004;15:219-24.
- Nallamuthu NA, Braden M, Patel MP. Some aspects of the formulation of alginate dental impression materials-setting characteristics and mechanical properties. Dent Mater 2012;28:756-62. https://doi.org/10.1016/j.dental.2012.03.012
- Gent AN. On the Relation Between Indentation Hardness and Young's Modulus. Transactions of The Institute of the Rubber Industry 1958;34:47-57.
피인용 문헌
- A Promising Potential of Brown Algae Sargassum polycystum as Irreversible Hydrocolloid Impression Material vol.20, pp.1, 2016, https://doi.org/10.3390/md20010055