DOI QR코드

DOI QR Code

Numerical analysis on foam reaction injection molding of polyurethane, Part A: Considering re-condensation of physical foam agent

  • Han, HyukSu (Korea Institute of Industrial Technology, Korea Creative Industry & Engineering Center) ;
  • Nam, Hyun Nam (S&WISE Co. Ltd.) ;
  • Eun, Youngkee (Korea Institute of Industrial Technology, Korea Creative Industry & Engineering Center) ;
  • Lee, Su Yeon (Korea Institute of Industrial Technology, Korea Creative Industry & Engineering Center) ;
  • Nam, Jeongho (Korea Institute of Industrial Technology) ;
  • Ryu, Jeong Ho (Department of Materials Science and Engineering, Korea National University of Transportation) ;
  • Lee, Sung Yoon (S&WISE Co. Ltd.) ;
  • Kim, Jungin (Korea Institute of Industrial Technology, Korea Creative Industry & Engineering Center)
  • 투고 : 2016.10.06
  • 심사 : 2016.10.17
  • 발행 : 2016.10.31

초록

Foam reaction injection molding (FRIM) is a widely used process for manufacturing polyurethane foam with complex shapes. Numerical model for polyurethane foam forming reaction during FRIM process has been intensively investigated by a number of researchers to precisely predict final shapes of polyurethane foams. In this study, we have identified a problem related with a previous theoretical model for polyurethane foam forming reaction. Thus, previous theoretical model was modified based on experimental and computational results.

키워드

참고문헌

  1. C. Kim and J.R. Youn, "Environmentally friendly processing of polyurethane foam for thermal insulation", Polymer-Plastics Technology and Engineering 39 (2000) 163. https://doi.org/10.1081/PPT-100100022
  2. M.S. Koo, K. Chung and J.R. Youn, "Reaction injection molding of polyurethane foam for improved thermal insulation", Polymer Engineering and Science 41 (2001) 1177. https://doi.org/10.1002/pen.10819
  3. W.H. Lee, S.W. Lee, T.J. Kang, K. Chung and J.R. Youn, "Processing of polyurethane/polystyrene hybrid foam and numerical simulation", Fibers and Polymers 3 (2002) 159. https://doi.org/10.1007/BF02912661
  4. S.A. Baser and D.V. Khakhar, "Modeling of the dynamics of R-11 blown polyurethane foam formation", Polymer Engineering & Science 34 (1994) 632. https://doi.org/10.1002/pen.760340804
  5. S.A. Baser and D.V. Khakhar, "Modeling of the dynamics of water and R-11 blown polyurethane foam formation" Polymer Engineering & Science 34 (1994) 642. https://doi.org/10.1002/pen.760340805
  6. D. Seo and J.R. Youn, "Numerical analysis on reaction injection molding of polyurethane foam by using a finite volume method", Polymer 46 (2005) 6482. https://doi.org/10.1016/j.polymer.2005.03.126
  7. S.V. Patankar, "Numerical heat transfer and fuild flow", Heisphere, Washington D.C. (1980).
  8. S.R. Mathur and J.Y. Murthy, "A pressure-based method for unstructured meshes" Numerical Heat Transfer Part B-Fundamentals 31 (1997) 195. https://doi.org/10.1080/10407799708915105
  9. C.W. Hirt and B.D. Nichols, "Volume of fluid (VOF) method for the dynamics of free boundaries", Journal of Computational Physics 39 (1981) 201. https://doi.org/10.1016/0021-9991(81)90145-5
  10. R. Tesser, M. Di Serio, A. Sclafani and E. Santacesaria, "Modeling of polyurethane foam formation" Journal of Applied Polymer Science 92 (2004) 1875. https://doi.org/10.1002/app.20170

피인용 문헌

  1. Effects of air vents on the flow of reacting polyurethane foam in a refrigerator cavity pp.07306679, 2017, https://doi.org/10.1002/adv.21916