DOI QR코드

DOI QR Code

The Design of Fault Tolerant Dual System and Real Time Fault Detection for Countdown Time Generating System

  • Kim, Jeong-Seok (Dept. of Computer Engineering, Chung-Nam National University / Dept. of Flight Safety Technology Team, KARI) ;
  • Han, Yoo-Soo (Dept. of Electronic Engineering, Kyungpook National University / Dept. of Flight Safety Technology Team, KARI)
  • Received : 2016.09.24
  • Accepted : 2016.10.08
  • Published : 2016.10.31

Abstract

In this paper, we propose a real-time fault monitoring and dual system design of the countdown time-generating system, which is the main component of the mission control system. The countdown time-generating system produces a countdown signal that is distributed to mission control system devices. The stability of the countdown signal is essential for the main launch-related devices because they perform reserved functions based on the countdown time information received from the countdown time-generating system. Therefore, a reliable and fault-tolerant design is required for the countdown time-generating system. To ensure system reliability, component devices should be redundant and faults should be monitored in real time to manage the device changeover from Active mode to Standby mode upon fault detection. In addition, designing different methods for mode changeover based on fault classification is necessary for appropriate changeover. This study presents a real-time fault monitoring and changeover system, which is based on the dual system design of countdown time-generating devices, as well as experiment on real-time fault monitoring and changeover based on fault inputs.

Keywords

References

  1. Jong-Ho Kim, Seok-Young Youn, "Description of Lauch Control System in Space Center", Current Industrial and Technological Trends in Aerospace, Vol. 3, No. 1, pp.108-120, July 2005.
  2. Yoo-Soo Han, Yong-Tae Choi, "Technical Trend of Time Syncronization Equipment in Naro Space Center", Current Industrial and Technological Trends in Aerospace, Vol. 6, No. 1, pp.114-121, July 2008.
  3. Yoo-Soo Han, Yong-Tae Choi, Hyo-Keun Lee, "An Introduction to the Launch Vehicle Lift-off Signal Processing Equipment at Naro Space Center," The Korean Society For Aeronautical and Space Science, Vol. 85, No. 2, pp. 1112-1115, November 2008.
  4. Jeong-Seok Kim, Seung-Yul Yang, Jong-Pyo Han, "The BIT Design for Identifying Malfunction in Avionics", The Korea Society For Aeronautical And Space Sciences, pp. 1711-1714, November 2014.
  5. Hae-Dong Park, Jong-Hyun Ha, Hun-Chang Park, Se-Hoon Lee, "Design and Implementation of Embedded Based DCS Terminal Remote Monitoring System", The Korean Society of Computer and Information, pp. 219-223, June 2007.
  6. Jeong-Seok Kim, Yoo-Soo Han, "Research on the Changeover Software for Duplicated Countdown Time Generating Device of the Mission Control System", The Korea Society of Computer and Information, Vol. 24, No. 2, pp. 33-36, July 2016.
  7. Sung-Woo Kim, Byung-Hwa Lee, Won-Hong Chang, Woo-Seop Oh, "Design and Verification of Built In Test For KUH", Journal of The Korea Society for Aeronautical and Space Sciences, Vol. 40, No. 7, pp. 623-628, July 2012. https://doi.org/10.5139/JKSAS.2012.40.7.623
  8. Sang-June Park, Dae-Seong Kang, "Implementation of Real-time Monitoring System using the Neural Network for Automatic Failure Diagnosis of Offshore Wind Turbine", Journal of Korean Institute of Information Technology, Vol. 10, No. 7, pp. 193-198, July 2012.
  9. Do-Yeon Hwang, Doo-Young Kim, Sung-Ju Park, "Design of Defect Diagnosis Platform based on CAN Network for Reliability Improvement of Vehicle SoC", Journal of the Institute of Electronics and Information Engineers, Vol 52, No. 10, pp. 47-55, October 2015. https://doi.org/10.5573/ieie.2015.52.10.047
  10. Jeong-Won Park, Seong-Jin Park, "Implementation of a redundant network protocol based on VMEbus", The Korea Institute of Information and Communication Enginerring, Vol. 15, No. 3. pp. 753-758, March 2011. https://doi.org/10.6109/jkiice.2011.15.3.753
  11. Young-Mi Jeon, Jeong-Hui Jo, Ji-Hoon Kim, "Ground Control Equipment Redundancy for Reliable Operation of UAV", The Korean Society For Aeronautical And Space Sciences, pp. 716-719, April 2014.
  12. Jin-Wook Shin, Dong-Sun Park, "The Implementation of Fault-Tolerant Dual System Using the Hot-Standby Sparing Technique", Korea Institute of Communication Sciences, Vol. 29, No. 10, pp. 1113-1122, October 2004.