DOI QR코드

DOI QR Code

아크릴로나이트릴·뷰타다이엔·스타이렌 수지와 용융적층조형 방식의 3차원 프린팅 기술로 제작된 전산화단층영상장치 팬톰에서 영상 균일성 및 X선 투과성 평가

Evaluation of Image Uniformity and Radiolucency for Computed Tomography Phantom Made of 3-Dimensional Printing of Fused Deposition Modeling Technology by Using Acrylonitrile Butadiene Styrene Resin

  • 성열훈 (청주대학교 방사선학과)
  • 투고 : 2016.08.15
  • 심사 : 2016.09.07
  • 발행 : 2016.09.30

초록

본 연구에서는 3차원(3-dimensional, 3D) 프린팅 기술로 출력된 팬톰에 대한 X선 투과성을 평가하고자 하였다. 3D 프린팅 방식은 용융적층조형(fused deposition modeling, FDM) 방식을 이용했으며 소재는 아크릴로나이트릴 뷰타다이엔 스타이렌(acrylonitrile butadiene styrene, ABS)을 사용하였다. 팬톰은 원통 모양으로 설계하였으며 전산화단층영상장비(computed tomography, CT)에서 획득한 단면영상으로 균일도를 측정하였다. X선 투과성 평가는 3D 출력된 팬톰 내부에 이온챔버를 삽입하여 실시하였다. 그 결과, 평균 균일도가 2.70 HU이었으며 기존 폴리메틸 메타크릴레이트(poly methyl methacrylate, PMMA) CT 팬톰과 3D 프린터로 출력된 팬톰에서 측정된 X선 투과성의 상관관계는 0.976로 높은 상관관계가 있는 것으로 나타났다. 향후 3D 프린팅 기술을 이용한 방사선정도관리 팬톰 제작에 기초자료로 활용할 수 있으리라 기대한다.

The purpose of this study was to evaluate the radiolucency for the phantom output to the 3D printing technology. The 3D printing technology was applied for FDM (fused deposition modeling) method and was used the material of ABS (acrylonitrile butadiene styrene) resin. The phantom was designed in cylindrical uniformity. An image uniformity was measured by a cross-sectional images of the 3D printed phantom obtained from the CT equipment. The evaluation of radiolucency was measured exposure dose by the inserted ion-chamber from the 3D printed phantom. As a results, the average of uniformity in the cross-sectional CT image was 2.70 HU and the correlation of radiolucency between PMMA CT phantom and 3D printed ABS phantom is found to have a high correlation to 0.976. In the future, this results will be expected to be used as the basis for the phantom production of the radiation quality control by used 3D printing technology.

키워드

참고문헌

  1. Reeves P., Mendis D.: The Current Status and Impact of 3D Printing Within the Industrial Sector: An Analysis of Six Case Studies, Bournemouth university, 1-68, 2015
  2. Wohlers T.: Additive Manufacturing and 3D Printing State of the Industry, Wohlers Associates, Inc. 2013.
  3. Julian R.P., Steven L., Arta M.M., Jian J.L.: Anthropomorphic Phantoms for Confirmation of Linear Accelerator-Based Small Animal Irradiation, Cureus, 7(3), e254, 2015
  4. Oh W.K.: Evaluation of Usefulness and Availability for Orthopedic Surgery using Clavicle Fracture Model Manufactured by Desktop 3D Printer, Journal of Radiological Science and Technology, 37(3), 203-209, 2013
  5. Seoung Y.H.: A Study of 3D Printing of Self Customization Cast by Using Fused Deposition Modeling Technique of ABS Resin, Journal of Korea Academia-Industrial cooperation Society, 16(9), 6019-6026, 2015 https://doi.org/10.5762/KAIS.2015.16.9.6019
  6. Yayue P., Xuejin Z., Chi Z., Yong C.: Smooth surface fabrication in mark projection based stereolithography, Journal of Manufacturing Processes, 14(4), 460-470, 2012 https://doi.org/10.1016/j.jmapro.2012.09.003
  7. Katal G., Tyagi N., Joshi A.: Digital Light Processing and its Future Applications, Int. J. of Scientific and Research Publication, 3(4), 1-8, 2013
  8. Ruban W., George G.J., Chockalingam H.: process parameters optimization in selective laser sintering, ISR National Journal, 1(1), 42-55, 2014
  9. Ahn S.H., Montero M., Odell D., Roundy S., Wright P.K.: Anisotropic material properties of fused deposition modeling ABS, Rapid Prototyping Journal, 8(4), 248-257, 2002 https://doi.org/10.1108/13552540210441166
  10. Jo P.K., Kim Y.H., Choi I.J. et al.: Assessment of the Eye Lens Dose Reduction by Bismuth Shields in Rando Phantom Undergoing CT of the Head, Journal of Radiological Science and Technology, 31(2), 171-175, 2008
  11. Park S.H., Park J.H., Lee H.J., N. K. Lee N.K.: Current Status of Biomedical Applications using 3D Printing Technology, Journal of the Korean Society of Precision Engineering, 31(12), 1067-1076, 2014 https://doi.org/10.7736/KSPE.2014.31.12.1067
  12. Miller J.S., Stevens K.R., Yang M.T., et al.: Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues, Nat Mater. 11(9), 768-774, 2012 https://doi.org/10.1038/nmat3357
  13. Seoung Y.H.: 3-Dimension Printing for Mesh Types of Short Arm Cast by Using Computed Tomography, J Korean Conten Soc, 15(1), 308-315, 2015
  14. Seoung Y.H.: Comparison of Hounsfield Units by Changing in Size of Physical Area and Setting Size of Region of Interest by Using the CT Phantom Made with a 3D Printer, Journal of Radiological Science and Technology, 38(4), 421-427, 2015 https://doi.org/10.17946/JRST.2015.38.4.12
  15. Ionita C.N., Mokin M., Varble N., et al.: Challenges and Limitations of Patient-Specific Vascular Phantom Fabrication Using 3D Polyjet Printing, Proc SPIE Int Soc Opt Eng, 9038:90380M, 13, 2014
  16. Russ M, O'Hara R, Setlur Nagesh S.V., et al.: Treatment Planning for Image-Guided Neuro-Vascular Interventions Using Patient-Specific 3D Printed Phantoms, Proc SPIE Int Soc Opt Eng 9417:941726-1-941726-11, 19, 2015
  17. Leigh, Simon J., Purssell, C. P., Billson, D. R., Hutchins, D. A.: A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors, Plus One, 2012