DOI QR코드

DOI QR Code

Reliability-based design of semi-rigidly connected base-isolated buildings subjected to stochastic near-fault excitations

  • 투고 : 2016.04.02
  • 심사 : 2016.10.05
  • 발행 : 2016.10.25

초록

Base isolation is a well-established passive strategy for seismic response control of buildings. In this paper, an efficient framework is proposed for reliability-based design optimization (RBDO) of isolated buildings subjected to uncertain earthquakes. The framework uses reduced function evaluations method, as an efficient tool for structural reliability analysis, and an efficient optimization algorithm for optimal structural design. The probability of failure is calculated considering excessive base displacement, superstructure inter-storey drifts, member stress ratios and absolute accelerations of floors of the isolated building as failure events. The behavior of rubber bearing isolators is modeled using nonlinear hysteretic model and the variability of future earthquakes is modeled by applying a probabilistic approach. The effects of pulse component of stochastic near-fault ground motions, fixity-factor of semi-rigid beam-to-column connections, values of isolator parameters, earthquake magnitude and epicentral distance on the performance and safety of semi-rigidly connected base-isolated steel framed buildings are studied. Suitable RBDO examples are solved to illustrate the results of investigations.

키워드

참고문헌

  1. AISC (2010), Specification for structural steel buildings, American Institute of Steel Construction, ANSI/AISC 360-10, Chicago, USA.
  2. Alhan, C. and Davas, S.O. (2016), "Performance limits of seismically isolated buildings under near-field earthquakes", Eng. Struct., 116, 83-94. https://doi.org/10.1016/j.engstruct.2016.02.043
  3. Alhan, C. and Gavin, H.P. (2005), "Reliability of base isolation for the protection of critical equipment from earthquake hazards", Eng. Struct., 27(9), 1435-1449. https://doi.org/10.1016/j.engstruct.2005.04.007
  4. Alhan, C. and Ozgur, M. (2015), "Seismic responses of base-isolated buildings: efficacy of equivalent linear modeling under near-fault earthquakes", Smart Struct. Syst., 15(6), 1439-1461. https://doi.org/10.12989/sss.2015.15.6.1439
  5. Artar, M. and Daloglu, A.T. (2015), "Optimum design of steel frames with semi-rigid connections and composite beams", Struct. Eng. Mech., 55(2), 299-313. https://doi.org/10.12989/sem.2015.55.2.299
  6. Azar, B.F., Hadidi, A. and Rafiee, A. (2015), "An efficient simulation method for reliability analysis of systems with expensive-to-evaluate performance functions", Struct. Eng. Mech., 55(5), 979-999. https://doi.org/10.12989/sem.2015.55.5.979
  7. Boore, D.M. (2003), "Simulation of ground motion using the stochastic method", Pure. Appl. Geophys., 160(3-4), 635-676. https://doi.org/10.1007/PL00012553
  8. Bray, J.D. and Rodriguez-Marek, A. (2004), "Characterization of forward-directivity ground motions in the near-fault region", Soil. Dyn. Earthq. Eng., 24(11), 815-828. https://doi.org/10.1016/j.soildyn.2004.05.001
  9. Cavdar, O. (2013), "Probabilistic sensitivity analysis of suspension bridges to near-fault ground motion", Steel Compos. Struct., 15(1), 15-39. https://doi.org/10.12989/scs.2013.15.1.15
  10. Ceccoli, C., Mazzotti, C. and Savoia, M. (1999), "Non-linear seismic analysis of base-isolated RC frame structures", Earthq. Eng. Struct. Dyn., 28(6), 633-653. https://doi.org/10.1002/(SICI)1096-9845(199906)28:6<633::AID-EQE832>3.0.CO;2-3
  11. Chen, S.H., Song, M. and Chen, Y.D. (2007), "Robustness analysis of responses of vibration control structures with uncertain parameters using interval algorithm", Struct. Saf., 29(2), 94-111. https://doi.org/10.1016/j.strusafe.2006.03.001
  12. Chen, J., Weiqing, L., Peng, Y. and Li, J. (2007), "Stochastic seismic response and reliability analysis of base-isolated structures", J. Earthq. Eng., 11(6), 903-924. https://doi.org/10.1080/13632460701242757
  13. Cheng, F.Y., Jiang, H. and Lou, K. (2008), Smart Structures: Innovative Systems for Seismic Response Control, CRC Press, New York, NY, USA.
  14. Chopra, A.K. (2007), Dynamics of Structures: Theory and Applications to Earthquake Engineering, (3rd Edition), Prentice Hall, New Jersey, NJ, USA.
  15. Chopra, A.K. and Chintanapakdee, C. (2001), "Comparing response of SDF systems to near-fault earthquake motions in the context of spectral regions", Earthq. Eng. Struct. Dyn., 30(12), 1769-1789. https://doi.org/10.1002/eqe.92
  16. Degertekin, S.O. and Hayalioglu, M.S. (2010), "Harmony search algorithm for minimum cost design of steel frames with semi-rigid connections and column bases", Struct. Multidisc. Optim., 42(5),755-768. https://doi.org/10.1007/s00158-010-0533-7
  17. DeLuca, A., Mele, E., Molina, J., Verzeletti, G. and Pinto, A.V. (2001), "Base isolation for retrofitting historic buildings: evaluation of seismic performance through experimental investigation", Earthq. Eng. Struct. Dyn., 30(8), 1125-1145. https://doi.org/10.1002/eqe.54
  18. Domizio, M., Ambrosini, D. and Curadelli, O. (2015), "Performance of TMDs on nonlinear structures subjected to near-fault earthquakes", Smart Struct. Syst., 16(4), 725-742. https://doi.org/10.12989/sss.2015.16.4.725
  19. Hadidi, A. and Rafiee, A. (2014), "Harmony search based, improved particle swarm optimizer for minimum cost design of semi-rigid steel frames", Struct. Eng. Mech., 50(3), 323-347. https://doi.org/10.12989/sem.2014.50.3.323
  20. Hadidi, A. and Rafiee, A. (2015), "A new hybrid algorithm for simultaneous size and semi-rigid connection type optimization of steel frames", Int. J. Steel Struct., 15(1), 89-102. https://doi.org/10.1007/s13296-015-3006-4
  21. Hayalioglu, M.S. and Degertekin, S.O. (2005), "Minimum cost design of steel frames with semi-rigid connections and column bases via genetic optimization", Comput. Struct., 83(21-22), 1849-1863. https://doi.org/10.1016/j.compstruc.2005.02.009
  22. Jangid, R.S. and Kelly, J.M. (2001), "Base isolation for near-fault motions", Earthq. Eng. Struct. Dyn., 30(5), 691-707. https://doi.org/10.1002/eqe.31
  23. Jensen, H.A. and Kusanovic, D.S. (2014), "On the effect of near-field excitations on the reliability-based performance and design of base-isolated structures", Probab. Eng. Mech., 36(2), 28-44. https://doi.org/10.1016/j.probengmech.2014.03.003
  24. Jensen, H.A., Kusanovic, D.S. and Papadrakakis, M. (2012), "Reliability-based characterization of baseisolated structural systems", Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, Vienna, Austria, September.
  25. Jensen, H.A. and Sepulveda, J.G. (2012), "On the reliability-based design of structures including passive energy dissipation systems", Struct. Saf., 34(1), 390-400. https://doi.org/10.1016/j.strusafe.2011.09.005
  26. Jian, F., Xiaohong, L. and Yanping, Z. (2015), "Optimum design of lead-rubber bearing system with uncertainty parameters", Struct. Eng. Mech., 56(6), 959-982. https://doi.org/10.12989/sem.2015.56.6.959
  27. Juhn, G. and Manolis, G.D. (1992), "Stochastic sensitivity and uncertainty of secondary systems in baseisolated structures", J. Sound. Vib., 159(2), 207-222. https://doi.org/10.1016/0022-460X(92)90032-S
  28. Kawano, K., Arakawa, K., Thwe, M. and Venkastaramana, K. (2002), "Seismic response evaluation of baseisolated structures with uncertainties", Proceedings of the Second International Conference on Structural Stability and Dynamics, Singapore, December.
  29. Kelly, J.M. (1986), "Aseismic base isolation: review and bibliography", Soil. Dyn. Earthq. Eng., 5(4), 202-216. https://doi.org/10.1016/0267-7261(86)90006-0
  30. Kennedy, J. and Eberhart, R. (1995), "Particle swarm optimization", Proceedings of the IEEE International Conference Neural Networks, Perth, Australia, IV, 1942-1948.
  31. Lee, K.S. and Geem, Z.W. (2005), "A new meta-heuristic algorithm for continuous engineering optimization: harmony search theory and practice", Comput. Meth. Appl. Mech. Eng., 194(36-38), 3902- 3933. https://doi.org/10.1016/j.cma.2004.09.007
  32. Macrae, G.A., Morrow, D.V. and Roeder, C.W. (2001), "Near-fault ground motions effects on simple structures", J. Struct. Eng., ASCE, 127(9), 996-1004. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(996)
  33. Makris, N. and Chang, S. (1998), Effects of damping mechanisms on the response of seismically isolated structures. PEER Report 1998/06, Berkeley (CA): Pacific Earthquake Engineering Research Center, College of Engineering, University of California.
  34. Mavroeidis, G.P. and Papageorgiou, A.S. (2003), "A mathematical representation of near-fault ground motions", Bull. Seismol. Soc. Am., 93(3), 1099-1131. https://doi.org/10.1785/0120020100
  35. Mazza, F. (2015), "Comparative study of the seismic response of RC framed buildings retrofitted using modern techniques", Earthq. Struct., 9(1), 29-48. https://doi.org/10.12989/eas.2015.9.1.029
  36. Minewaki, S., Yamamoto, M., Higashino, M., Hamaguchi, H., Kyuke, H., Sone, T. and Wada, A. (2009), "Performance tests of full size isolators for super high-rise isolated buildings", J. Struct. Eng. AIJ, 55(B), 469-477.
  37. Mishra, S.K., Roy, B.K. and Chakraborty, S. (2013), "Reliability-based-design-optimization of base isolated buildings considering stochastic system parameters subjected to random earthquakes", Int. J. Mech. Sci., 75, 123-133. https://doi.org/10.1016/j.ijmecsci.2013.06.012
  38. Mokha, A.S., Amin, N., Constantinou, M.C. and Zayas, V. (1996), "Seismic isolation retrofit of large historic building", J. Struct. Eng., ASCE, 122(3), 298-308. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(298)
  39. Monforton, G.R. and Wu, T.S. (1963), "Matrix analysis of semi-rigidly connected frames", J. Struct. Eng., ASCE, 89(6), 13-42.
  40. Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures: From Theory to Practice, John Wiley & Sons, Inc., New York, NY, USA.
  41. Nigdeli, S.M., Bekdas, G. and Alhan, C. (2014), "Optimization of seismic isolation systems via harmony search", Eng. Optim., 46(11), 1553-1569. https://doi.org/10.1080/0305215X.2013.854352
  42. Providakis, C.P. (2008), "Effect of LRB isolators and supplemental viscous dampers on seismic isolated buildings under near-fault excitations", Eng. Struct., 30(5), 1187-1198. https://doi.org/10.1016/j.engstruct.2007.07.020
  43. Rafiee, A., Talatahari, S. and Hadidi, A. (2013), "Optimum design of steel frames with semi-rigid connections using big bang-big crunch method", Steel Compos. Struct., 14(5), 431-451. https://doi.org/10.12989/scs.2013.14.5.431
  44. Roy, B.K. and Chakraborty, S. (2013), "Optimal design of base isolation system considering uncertain bounded system parameters", Struct. Eng. Mech., 46(1), 19-37. https://doi.org/10.12989/sem.2013.46.1.019
  45. Shi, Y. and Eberhart, R. (1998), "A modified particle swarm optimizer", Proc. IEEE Int. Conf. Evolutionary Computation, Piscataway, IEEE Press, 69-73.
  46. Su, L., Ahmadi, G. and Tadjbakhsh, J.G. (1990), "A comparative study of performances of various base isolation systems, part II: sensitivity analysis", Earthq. Eng. Struct. Dyn., 19(1), 21-33. https://doi.org/10.1002/eqe.4290190104
  47. Taflanidis, A. (2007), "Stochastic system design and applications to stochastically robust structural control", Ph.D. Dissertation, California Institute of Technology, California, USA.
  48. Vasiliadis, L.K. (2016), "Seismic evaluation and retrofitting of reinforced concrete buildings with base isolation systems", Earthq. Struct., 10(2), 293-311. https://doi.org/10.12989/eas.2016.10.2.293
  49. Yamamoto, M., Minewaki, S., Higashino, M., Hamaguchi, H., Kyuke, H., Sone, T. and Yoneda, H. (2009), "Performance tests of fully size rubber bearings for isolated super high-rise buildings", Proceedings of International Symposium on Seismic Response Controlled Buildings for Sustainable Society, Tokyo, Japan, September.
  50. Yamamoto, M., Minewaki, S., Yoneda, H. and Higashino, M. (2012), "Nonlinear behavior of high-damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling", Earthq. Eng. Struct. Dyn., 41(13), 1845-1860. https://doi.org/10.1002/eqe.2161
  51. Zhang, Y., Web, B. and Liu, Q. (1998), "First passage of uncertain single degree-of-freedom nonlinear oscillations", Comput. Meth. Appl. Mech. Eng., 165(1), 223-231. https://doi.org/10.1016/S0045-7825(98)00042-5
  52. Zou, X-K., Wang, Q., Li, G. and Chan, C-M. (2010), "Integrated reliability-based seismic drift design optimization of base-isolated concrete buildings", J. Struct. Eng., ASCE, 136(10), 1282-1295. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000216

피인용 문헌

  1. Opposition based charged system search for parameter identification problem in a simplified Bouc-Wen model vol.18, pp.4, 2016, https://doi.org/10.12989/eas.2020.18.4.493
  2. Minimum cost strengthening of existing masonry arch railway bridges vol.75, pp.2, 2016, https://doi.org/10.12989/sem.2020.75.2.271
  3. Seismic poundings of multi-story buildings isolated by TFPB against moat walls vol.20, pp.3, 2021, https://doi.org/10.12989/eas.2021.20.3.295
  4. Reliability-based optimal control of semi-rigid steel frames under simulated earthquakes using liquid column vibration absorbers vol.53, pp.4, 2016, https://doi.org/10.1080/0305215x.2020.1743987