References
- AISC (2010), Specification for structural steel buildings, American Institute of Steel Construction, ANSI/AISC 360-10, Chicago, USA.
- Alhan, C. and Davas, S.O. (2016), "Performance limits of seismically isolated buildings under near-field earthquakes", Eng. Struct., 116, 83-94. https://doi.org/10.1016/j.engstruct.2016.02.043
- Alhan, C. and Gavin, H.P. (2005), "Reliability of base isolation for the protection of critical equipment from earthquake hazards", Eng. Struct., 27(9), 1435-1449. https://doi.org/10.1016/j.engstruct.2005.04.007
- Alhan, C. and Ozgur, M. (2015), "Seismic responses of base-isolated buildings: efficacy of equivalent linear modeling under near-fault earthquakes", Smart Struct. Syst., 15(6), 1439-1461. https://doi.org/10.12989/sss.2015.15.6.1439
- Artar, M. and Daloglu, A.T. (2015), "Optimum design of steel frames with semi-rigid connections and composite beams", Struct. Eng. Mech., 55(2), 299-313. https://doi.org/10.12989/sem.2015.55.2.299
- Azar, B.F., Hadidi, A. and Rafiee, A. (2015), "An efficient simulation method for reliability analysis of systems with expensive-to-evaluate performance functions", Struct. Eng. Mech., 55(5), 979-999. https://doi.org/10.12989/sem.2015.55.5.979
- Boore, D.M. (2003), "Simulation of ground motion using the stochastic method", Pure. Appl. Geophys., 160(3-4), 635-676. https://doi.org/10.1007/PL00012553
- Bray, J.D. and Rodriguez-Marek, A. (2004), "Characterization of forward-directivity ground motions in the near-fault region", Soil. Dyn. Earthq. Eng., 24(11), 815-828. https://doi.org/10.1016/j.soildyn.2004.05.001
- Cavdar, O. (2013), "Probabilistic sensitivity analysis of suspension bridges to near-fault ground motion", Steel Compos. Struct., 15(1), 15-39. https://doi.org/10.12989/scs.2013.15.1.15
- Ceccoli, C., Mazzotti, C. and Savoia, M. (1999), "Non-linear seismic analysis of base-isolated RC frame structures", Earthq. Eng. Struct. Dyn., 28(6), 633-653. https://doi.org/10.1002/(SICI)1096-9845(199906)28:6<633::AID-EQE832>3.0.CO;2-3
- Chen, S.H., Song, M. and Chen, Y.D. (2007), "Robustness analysis of responses of vibration control structures with uncertain parameters using interval algorithm", Struct. Saf., 29(2), 94-111. https://doi.org/10.1016/j.strusafe.2006.03.001
- Chen, J., Weiqing, L., Peng, Y. and Li, J. (2007), "Stochastic seismic response and reliability analysis of base-isolated structures", J. Earthq. Eng., 11(6), 903-924. https://doi.org/10.1080/13632460701242757
- Cheng, F.Y., Jiang, H. and Lou, K. (2008), Smart Structures: Innovative Systems for Seismic Response Control, CRC Press, New York, NY, USA.
- Chopra, A.K. (2007), Dynamics of Structures: Theory and Applications to Earthquake Engineering, (3rd Edition), Prentice Hall, New Jersey, NJ, USA.
- Chopra, A.K. and Chintanapakdee, C. (2001), "Comparing response of SDF systems to near-fault earthquake motions in the context of spectral regions", Earthq. Eng. Struct. Dyn., 30(12), 1769-1789. https://doi.org/10.1002/eqe.92
- Degertekin, S.O. and Hayalioglu, M.S. (2010), "Harmony search algorithm for minimum cost design of steel frames with semi-rigid connections and column bases", Struct. Multidisc. Optim., 42(5),755-768. https://doi.org/10.1007/s00158-010-0533-7
- DeLuca, A., Mele, E., Molina, J., Verzeletti, G. and Pinto, A.V. (2001), "Base isolation for retrofitting historic buildings: evaluation of seismic performance through experimental investigation", Earthq. Eng. Struct. Dyn., 30(8), 1125-1145. https://doi.org/10.1002/eqe.54
- Domizio, M., Ambrosini, D. and Curadelli, O. (2015), "Performance of TMDs on nonlinear structures subjected to near-fault earthquakes", Smart Struct. Syst., 16(4), 725-742. https://doi.org/10.12989/sss.2015.16.4.725
- Hadidi, A. and Rafiee, A. (2014), "Harmony search based, improved particle swarm optimizer for minimum cost design of semi-rigid steel frames", Struct. Eng. Mech., 50(3), 323-347. https://doi.org/10.12989/sem.2014.50.3.323
- Hadidi, A. and Rafiee, A. (2015), "A new hybrid algorithm for simultaneous size and semi-rigid connection type optimization of steel frames", Int. J. Steel Struct., 15(1), 89-102. https://doi.org/10.1007/s13296-015-3006-4
- Hayalioglu, M.S. and Degertekin, S.O. (2005), "Minimum cost design of steel frames with semi-rigid connections and column bases via genetic optimization", Comput. Struct., 83(21-22), 1849-1863. https://doi.org/10.1016/j.compstruc.2005.02.009
- Jangid, R.S. and Kelly, J.M. (2001), "Base isolation for near-fault motions", Earthq. Eng. Struct. Dyn., 30(5), 691-707. https://doi.org/10.1002/eqe.31
- Jensen, H.A. and Kusanovic, D.S. (2014), "On the effect of near-field excitations on the reliability-based performance and design of base-isolated structures", Probab. Eng. Mech., 36(2), 28-44. https://doi.org/10.1016/j.probengmech.2014.03.003
- Jensen, H.A., Kusanovic, D.S. and Papadrakakis, M. (2012), "Reliability-based characterization of baseisolated structural systems", Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, Vienna, Austria, September.
- Jensen, H.A. and Sepulveda, J.G. (2012), "On the reliability-based design of structures including passive energy dissipation systems", Struct. Saf., 34(1), 390-400. https://doi.org/10.1016/j.strusafe.2011.09.005
- Jian, F., Xiaohong, L. and Yanping, Z. (2015), "Optimum design of lead-rubber bearing system with uncertainty parameters", Struct. Eng. Mech., 56(6), 959-982. https://doi.org/10.12989/sem.2015.56.6.959
- Juhn, G. and Manolis, G.D. (1992), "Stochastic sensitivity and uncertainty of secondary systems in baseisolated structures", J. Sound. Vib., 159(2), 207-222. https://doi.org/10.1016/0022-460X(92)90032-S
- Kawano, K., Arakawa, K., Thwe, M. and Venkastaramana, K. (2002), "Seismic response evaluation of baseisolated structures with uncertainties", Proceedings of the Second International Conference on Structural Stability and Dynamics, Singapore, December.
- Kelly, J.M. (1986), "Aseismic base isolation: review and bibliography", Soil. Dyn. Earthq. Eng., 5(4), 202-216. https://doi.org/10.1016/0267-7261(86)90006-0
- Kennedy, J. and Eberhart, R. (1995), "Particle swarm optimization", Proceedings of the IEEE International Conference Neural Networks, Perth, Australia, IV, 1942-1948.
- Lee, K.S. and Geem, Z.W. (2005), "A new meta-heuristic algorithm for continuous engineering optimization: harmony search theory and practice", Comput. Meth. Appl. Mech. Eng., 194(36-38), 3902- 3933. https://doi.org/10.1016/j.cma.2004.09.007
- Macrae, G.A., Morrow, D.V. and Roeder, C.W. (2001), "Near-fault ground motions effects on simple structures", J. Struct. Eng., ASCE, 127(9), 996-1004. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(996)
- Makris, N. and Chang, S. (1998), Effects of damping mechanisms on the response of seismically isolated structures. PEER Report 1998/06, Berkeley (CA): Pacific Earthquake Engineering Research Center, College of Engineering, University of California.
- Mavroeidis, G.P. and Papageorgiou, A.S. (2003), "A mathematical representation of near-fault ground motions", Bull. Seismol. Soc. Am., 93(3), 1099-1131. https://doi.org/10.1785/0120020100
- Mazza, F. (2015), "Comparative study of the seismic response of RC framed buildings retrofitted using modern techniques", Earthq. Struct., 9(1), 29-48. https://doi.org/10.12989/eas.2015.9.1.029
- Minewaki, S., Yamamoto, M., Higashino, M., Hamaguchi, H., Kyuke, H., Sone, T. and Wada, A. (2009), "Performance tests of full size isolators for super high-rise isolated buildings", J. Struct. Eng. AIJ, 55(B), 469-477.
- Mishra, S.K., Roy, B.K. and Chakraborty, S. (2013), "Reliability-based-design-optimization of base isolated buildings considering stochastic system parameters subjected to random earthquakes", Int. J. Mech. Sci., 75, 123-133. https://doi.org/10.1016/j.ijmecsci.2013.06.012
- Mokha, A.S., Amin, N., Constantinou, M.C. and Zayas, V. (1996), "Seismic isolation retrofit of large historic building", J. Struct. Eng., ASCE, 122(3), 298-308. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(298)
- Monforton, G.R. and Wu, T.S. (1963), "Matrix analysis of semi-rigidly connected frames", J. Struct. Eng., ASCE, 89(6), 13-42.
- Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures: From Theory to Practice, John Wiley & Sons, Inc., New York, NY, USA.
- Nigdeli, S.M., Bekdas, G. and Alhan, C. (2014), "Optimization of seismic isolation systems via harmony search", Eng. Optim., 46(11), 1553-1569. https://doi.org/10.1080/0305215X.2013.854352
- Providakis, C.P. (2008), "Effect of LRB isolators and supplemental viscous dampers on seismic isolated buildings under near-fault excitations", Eng. Struct., 30(5), 1187-1198. https://doi.org/10.1016/j.engstruct.2007.07.020
- Rafiee, A., Talatahari, S. and Hadidi, A. (2013), "Optimum design of steel frames with semi-rigid connections using big bang-big crunch method", Steel Compos. Struct., 14(5), 431-451. https://doi.org/10.12989/scs.2013.14.5.431
- Roy, B.K. and Chakraborty, S. (2013), "Optimal design of base isolation system considering uncertain bounded system parameters", Struct. Eng. Mech., 46(1), 19-37. https://doi.org/10.12989/sem.2013.46.1.019
- Shi, Y. and Eberhart, R. (1998), "A modified particle swarm optimizer", Proc. IEEE Int. Conf. Evolutionary Computation, Piscataway, IEEE Press, 69-73.
- Su, L., Ahmadi, G. and Tadjbakhsh, J.G. (1990), "A comparative study of performances of various base isolation systems, part II: sensitivity analysis", Earthq. Eng. Struct. Dyn., 19(1), 21-33. https://doi.org/10.1002/eqe.4290190104
- Taflanidis, A. (2007), "Stochastic system design and applications to stochastically robust structural control", Ph.D. Dissertation, California Institute of Technology, California, USA.
- Vasiliadis, L.K. (2016), "Seismic evaluation and retrofitting of reinforced concrete buildings with base isolation systems", Earthq. Struct., 10(2), 293-311. https://doi.org/10.12989/eas.2016.10.2.293
- Yamamoto, M., Minewaki, S., Higashino, M., Hamaguchi, H., Kyuke, H., Sone, T. and Yoneda, H. (2009), "Performance tests of fully size rubber bearings for isolated super high-rise buildings", Proceedings of International Symposium on Seismic Response Controlled Buildings for Sustainable Society, Tokyo, Japan, September.
- Yamamoto, M., Minewaki, S., Yoneda, H. and Higashino, M. (2012), "Nonlinear behavior of high-damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling", Earthq. Eng. Struct. Dyn., 41(13), 1845-1860. https://doi.org/10.1002/eqe.2161
- Zhang, Y., Web, B. and Liu, Q. (1998), "First passage of uncertain single degree-of-freedom nonlinear oscillations", Comput. Meth. Appl. Mech. Eng., 165(1), 223-231. https://doi.org/10.1016/S0045-7825(98)00042-5
- Zou, X-K., Wang, Q., Li, G. and Chan, C-M. (2010), "Integrated reliability-based seismic drift design optimization of base-isolated concrete buildings", J. Struct. Eng., ASCE, 136(10), 1282-1295. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000216
Cited by
- Opposition based charged system search for parameter identification problem in a simplified Bouc-Wen model vol.18, pp.4, 2016, https://doi.org/10.12989/eas.2020.18.4.493
- Minimum cost strengthening of existing masonry arch railway bridges vol.75, pp.2, 2016, https://doi.org/10.12989/sem.2020.75.2.271
- Seismic poundings of multi-story buildings isolated by TFPB against moat walls vol.20, pp.3, 2021, https://doi.org/10.12989/eas.2021.20.3.295
- Reliability-based optimal control of semi-rigid steel frames under simulated earthquakes using liquid column vibration absorbers vol.53, pp.4, 2016, https://doi.org/10.1080/0305215x.2020.1743987