Geomechanics and Engineering

  • 제11권4호
  • /
  • Pages.471-492
  • /
  • 2016
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Stability assessment of tunnel face in a layered soil using upper bound theorem of limit analysis

  • Khezri, Nima (UTM Construction Research Centre (UTM CRC), Institute of Smart Infrastructure and Innovative Construction, Universiti Teknologi Malaysia) ;
  • Mohamad, Hisham (Civil and Environmental Engineering Department, Universiti Teknologi PETRONAS) ;
  • Fatahi, Behzad (School of Civil and Environmental Engineering, University of Technology)
  • 투고 : 2015.04.02
  • 심사 : 2016.05.17
  • 발행 : 2016.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Underground tunnelling is one of the sustainable construction methods which can facilitate the increasing passenger transportation in the urban areas and benefit the community in the long term. Tunnelling in various ground conditions requires careful consideration of the stability factor. This paper investigates three dimensional stability of a shallow circular tunnel in a layered soil. Upper bound theorem of limit analysis was utilised to solve the tunnel face stability problem. A three dimensional kinematic admissible failure mechanism was improved to model a layered soil and limiting assumptions of the previous studies were resolved. The study includes calculation of the minimum support pressure acting on the face of the excavation in closed-face excavations. The effects of the characteristics of the layers on the minimum support pressure were examined. It was found that the ratio of the thickness of cover layers particularly when a weak layer is overlying a stronger layer, has the most significant influence on the minimum tunnel support pressure. Comparisons have been made with the results of the numerical modelling using FLAC3D software. Results of the current study were in a remarkable agreement with those of numerical modelling.

키워드

참고문헌

  1. Anagnostou, G. and Kovari, K. (1994), "The face stability of slurry-shield driven tunnels", Tunn. Undergr. Space Technol., 9(2), 165-174. https://doi.org/10.1016/0886-7798(94)90028-0
  2. Anagnostou, G. and Kovari, K. (1996), "Face stability conditions with earth-pressure-balanced shields", Tunn. Undergr. Space Technol., 11(2), 165-173. https://doi.org/10.1016/0886-7798(96)00017-X
  3. Broere, W. (1998), "Face stability calculation for a slurry shield in heterogeneous soft soils", Proceedings of World Tunnel Congress 98 on Tunnels and Metropolises, Volume 1, Balkema, Rotterdam, The Netherlands, pp. 215-218.
  4. Broere, W. (2001), "Tunnel face stability and new CPT applications", Ph.D. Thesis; Geotechnical Laboratory, Delft University of Technology, The Netherlands.
  5. Chambon, P. and Corte, J.F. (1989), "Stabilite du front de taille d'un tunnel faiblement enterre: modelisation en centrifugeuse", Proceedings of the International Conference on Tunnelling and Microtunneling in Soft Ground: From Field to Theory, Paris, France, pp. 307-315.
  6. Chambon, P. and Corte, J.F. (1994), "Shallow tunnels in cohesionless soil: Stability of tunnel face", J. Geotech. Eng., 120(7), 1148-1165. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:7(1148)
  7. Ding, W.Q., Peng, Y.C., Yan, Z.G., Shen, B.W., Zhu, H.H. and Wei, X.X. (2013), "Full-scale testing and modeling of the mechanical behavior of shield TBM tunnel joints", Struct. Eng. Mec., Int. J., 45(3), 337-354. https://doi.org/10.12989/sem.2013.45.3.337
  8. Hassanpour, J., Rostami, J., Khamehchiyan, M. and Bruland, A. (2009), "Developing new equations for TBM performance prediction in carbonate-argillaceous rocks: A case history of Nowsood water conveyance tunnel", Geomech. Geoeng.: Int. J., 4(4), 287-297. https://doi.org/10.1080/17486020903174303
  9. Horn, M. (1961), "Horizontal earth pressure on perpendicular tunnel face", Proceedings of the Hungarian National Conference of the Foundation Engineer Industry, Budapest, Hungary, pp. 7-16. [In Hungarian]
  10. Ibrahim, E., Soubra, A.H., Mollon, G., Raphael, W., Dias, D. and Reda, A. (2015), "Three-dimensional face stability analysis of pressurized tunnels driven in a multilayered purely frictional medium", Tunn. Undergr. Space Technol., 49, 18-34. https://doi.org/10.1016/j.tust.2015.04.001
  11. Itasca Consulting Group, Inc. (1993), Fast Lagrangian Analysis of Continua, User's Manual.
  12. Jancsecz, S. and Steiner, W. (1994), "Face support for a large mix-shield in heterogenous ground conditions", In: Tunneling '94, Springer US, pp. 531-550.
  13. Janssen, H.A. (1895), "Versuche uber Getreidedruck in Silozellen (Texts on grain pressure in silos)", Zeitschr. d. Vereines deutscher Ingenieure, 39, 1045-1049.
  14. Khezri, E., Mohamad, H., HajiHassani, M. and Fatani, B. (2015), "The stability of shallow circular tunnels in soil considering variations in cohesion with depth", Tunn. Undergr. Space Technol., 49, 230-240. https://doi.org/10.1016/j.tust.2015.04.014
  15. Kirsch, A. (2010), "Experimental investigation of the face stability of shallow tunnels in sand", Acta Geotechnica, 5(1), 43-62. https://doi.org/10.1007/s11440-010-0110-7
  16. Leca, E. and Dormieux, L. (1990), "Upper and lower bound solutions for the face stability of shallow circular tunnels in frictional material", Geotechnique, 40(4), 581-606. https://doi.org/10.1680/geot.1990.40.4.581
  17. Mazek, S.A. (2014), "Evaluation of surface displacement equation due to tunnelling in cohesionless soil", Geomech. Eng., Int. J., 7(1), 55-73. https://doi.org/10.12989/gae.2014.7.1.055
  18. Mollon, G., Dias, D. and Soubra, A.H. (2009), "Probabilistic analysis and design of circular tunnels against face stability", Int. J. Geomech., 9(6), 237-249. https://doi.org/10.1061/(ASCE)1532-3641(2009)9:6(237)
  19. Mollon, G., Dias, D. and Soubra, A.H. (2010), "Face stability analysis of circular tunnels driven by a pressurized shield", J. Geotech. Geoenviron. Eng., 136(1), 215-229. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000194
  20. Mollon, G., Dias, D. and Soubra, A.H. (2011), "Rotational failure mechanisms for the face stability analysis of tunnels driven by a pressurized shield", Int. J. Numer. Anal. Meth. Geomech., 35(12), 1363-1388. https://doi.org/10.1002/nag.962
  21. Senent, S. and Jimenez, R. (2015), "A tunnel face failure mechanism for layered ground, considering the possibility of partial collapse", Tunn. Undergr. Space Technol., 47, 182-192. https://doi.org/10.1016/j.tust.2014.12.014
  22. Takano, D., Otani, J., Nagatani, H. and Mukunoki, T. (2006), "Application of X-ray CT boundary value problems in geotechnical engineering-Research on tunnel face failure", Proceedings of Geocongress 2006, ASCE, Reston, VA, USA.
  23. Tang, X.W., Liu, W. and Albers, B. (2014), "Upper bound of tunnel face stability in layered soils", Acta Geotechnica, 9(4), 661-671. https://doi.org/10.1007/s11440-013-0256-1

피인용 문헌

  1. Limit Support Pressure of Tunnel Face in Multi-Layer Soils Below River Considering Water Pressure vol.10, pp.1, 2016, https://doi.org/10.1515/geo-2018-0074
  2. Limit Support Pressure of Tunnel Face in Multi-Layer Soils Below River Considering Water Pressure vol.10, pp.1, 2016, https://doi.org/10.1515/geo-2018-0074
  3. Flow characteristics after water inrush from the working face in karst tunneling vol.14, pp.5, 2018, https://doi.org/10.12989/gae.2018.14.5.407
  4. Roof failure of shallow tunnel based on simplified stochastic medium theory vol.14, pp.6, 2016, https://doi.org/10.12989/gae.2018.14.6.571
  5. An improved collapse analysis mechanism for the face stability of shield tunnel in layered soils vol.17, pp.1, 2019, https://doi.org/10.12989/gae.2019.17.1.097
  6. Stability evaluation for the excavation face of shield tunnel across the Yangtze River by multi-factor analysis vol.19, pp.3, 2016, https://doi.org/10.12989/gae.2019.19.3.283
  7. Assessment of the Stability of an Unlined Rectangular Tunnel with an Overload on the Ground Surface vol.2020, pp.None, 2016, https://doi.org/10.1155/2020/6616067
  8. A Theoretical Calculation Method of the Unsupported Span for the Shallow Tunnel in the Soft Stratum vol.2020, pp.None, 2016, https://doi.org/10.1155/2020/7989036
  9. A set of failure variables for analyzing stability of slopes and tunnels vol.20, pp.3, 2016, https://doi.org/10.12989/gae.2020.20.3.175
  10. Experimental verification for prediction method of anomaly ahead of tunnel face by using electrical resistivity tomography vol.20, pp.6, 2016, https://doi.org/10.12989/gae.2020.20.6.475
  11. Deterministic and reliability-based design of necessary support pressures for tunnel faces vol.22, pp.1, 2016, https://doi.org/10.12989/gae.2020.22.1.035
  12. Calculation Model and Influencing Factors of Surrounding Rock Loosening Pressure for Tunnel in Fold Zone vol.2021, pp.None, 2016, https://doi.org/10.1155/2021/6678511
  13. Probabilistic tunnel face stability analysis: A comparison between LEM and LAM vol.24, pp.4, 2021, https://doi.org/10.12989/gae.2021.24.4.399
  14. Deterministic and probabilistic analysis of tunnel face stability using support vector machine vol.25, pp.1, 2021, https://doi.org/10.12989/gae.2021.25.1.017
  15. Three-dimensional finite element analysis of urban rock tunnel under static loading condition: Effect of the rock weathering vol.25, pp.2, 2016, https://doi.org/10.12989/gae.2021.25.2.099
  16. A cross-river tunnel excavation considering the water pressure effect based on DEM vol.25, pp.11, 2016, https://doi.org/10.1080/19648189.2019.1615555
  17. Three-Dimensional Face Stability Analysis of Deep and Shallow Tunnels in Rock Masses vol.21, pp.10, 2021, https://doi.org/10.1061/(asce)gm.1943-5622.0002152