초록
LNG 선박용 성형 벨로우즈의 성형방법에 따른 특성을 파악하기 위하여 정적시험과 저주기 피로시험을 실시하였다. 벨로우즈의 규정된 수명 사이클인 8,000회를 실시하여 시험전후의 벨로우즈의 각 산에 걸리는 변형률과 응력을 측정하여 성형방법에 따른 벨로우즈간의 차이를 분석하고 산 별 응력분포를 살펴보았다. 본 저주기 피로시험은 x-y방향의 변위가 가능한 유압시스템의 구조시험장비에 성형 벨로우즈를 장착하고 벨로우즈의 각 산에는 스트레인게이지를 장착하고 멀티레코더를 통하여 데이터를 처리하였다. 이를 통하여 벨로우즈가 성형방법에 따른 수명의 차이가 있는지 살펴보았고, 성형방법에 따른 수명의 차이를 주는 원인을 분석하였다.
Static tests and low-cycle fatigue tests were conducted to analyze the characteristics of the bellows for LNG vessels according to the forming methods. The cycle life of bellows was tested based on the specified cyclic life, 80000 cycles, to analyze the difference in characteristics between pre-and post-test data by measuring the strain and stress of each convolution of formed bellows. The low-cycle fatigue test was conducted using a strain gauge that was attached to the convolution of bellows. Formed bellows were placed on the structural test device which was equipped with a hydraulic system and was capable of moving in the x-y direction. Data was measured and processed by a multi recorder. Through the static test and low-cycle fatigue tests results, the difference between the cycle life of bellows formed by mechanical methods and of those formed by hydraulic methods was investigated. Moreover, the cause of difference in cyclic life according to forming methods was performed.