References
- J. H. Yoo, Y. U. Kim, and G. J. Lee, "Mineralogical Characteristics and Designation of Key Beds for the Effective Surveys of the Jeonnam Pyrophyllite Deposits (in Koran)," J. Miner. Soc. Kor., 22 [4] 297-305 (2009).
- S. M. Koh, "Suggestion on Quality Specifications of Domestic Pyrophyllite according to Utilization," J. Miner. Soc. Kor., 20 [1] 61-70 (2007).
- S. H. Lee, C. K. Cho, and W. T. Bac, "A Study on the Preparation of Alumina Powders from Bauxite by Wet Acid Process and Their Utilization (II) : Mullitization of Pyrophyllite- Aluminum Hydrate Gel Mixture (in Koran)," J. Korean Ceram. Soc., 27 [8] 1011-19 (1990).
- D. M. Choi, J. S. Lee, N. H. Kim, and S. C. Choi, "High Temperature Reaction Behaviors of Oxide Materials with Carbon for Refractory Application (in Koran)," J. Korean Ceram. Soc., 44 [6] 331-37 (2007). https://doi.org/10.4191/KCERS.2007.44.6.331
- H. S. Park, K. S. Cho, and C. S. Mun, "The Study on Fabrication of LAS System Ceramics for Thermal Shock Resistance from Silicate Minerals : (II) Preparation of Spodumene Powders with Sillimanite, Kaolin and Pyrophyllite Group Minerals," J. Miner. Soc. Kor., 31 [7] 784-94 (1994).
- D. M. Kim, S. I. Jung, H. C. Lee, and S. J. Lee, "Synthesis of Low-Thermal-Expansion Cordierite Ceramics Prepared from Pyrophyllite," J. Mater. Res. Kor., 25 [7] 330-35 (2015). https://doi.org/10.3740/MRSK.2015.25.7.330
- P. Fauchais, "Understanding Plasma Spraying," J. Phys. D. Appl. Phys., 37 [9] 86-108 (2004). https://doi.org/10.1088/0022-3727/37/1/014
- S. W. Myoung, J. H. Kim, W. R. Lee, Y. G. Jung, K. S. Lee, and U. Paik, "Microstructure Design and Mechanical Properties of Thermal Barrier Coatings with Layered Top and Bond Coats," J. Surf. Coat. Technol., 205 [5] 1229-35 (2010). https://doi.org/10.1016/j.surfcoat.2010.08.063
- A. Vaidya, V. Srinivasan, T. Streibl, M. Friis, W. Chi, and S. Sampath, "Process Maps for Plasma Spraying of Yttria-Stabilized Zirconia: An Integrated Approach to Design, Optimization and Reliability," Mater. Sci. Eng. A, 497 239-53 (2008). https://doi.org/10.1016/j.msea.2008.07.058
- D. H. Lee and K. S. Lee, "Mechanical Behavior of Layered YSZ Thermal Barrier Coatings using Indentation Test (in Koran)," J. Korean Ceram. Soc., 48 [5] 396-403 (2011). https://doi.org/10.4191/kcers.2011.48.5.396
- S. C. Byeon, H. J. Je, and K. S. Hong, "Spray Drying of Ferrite Powders and the Characteristics of the Granule (in Koran)," J. Korean Ceram. Soc., 32 [5] 549-58 (1995).
- X. Q. Cao, R. Vassen, S. Schwartz, W. Jungen, F. Tietz, and D. Stever, "Spray-drying of Ceramics for Plasma-Spray Coating," J. Eur. Ceram. Soc., 20 2433-39 (2000). https://doi.org/10.1016/S0955-2219(00)00112-6
- G. Bertrand, P. Bertrand, P. Roy, C. Rio, and R. Mevrel, "Low Conductivity Plasma Sprayed Thermal Barrier Coatings Using Hollow PSZ Spheres: Correlation between Thermophysical Properties and Microstructure," Surf. Coat. Technol., 202 1994-2001 (2008). https://doi.org/10.1016/j.surfcoat.2007.08.042
-
B. Ercan, K. J. Bowman, R. W. Trice, H. Wang, and W. Porter, "Effect of Initial Powder Morphology on Thermal and Mechanical Properties of Stand-alone Plasma-Sprayed 7 wt%
$Y_2O_3-ZrO_2$ Coatings," Mater. Sci. Eng. A, 435 212-20 (2006). -
Schrijnemakers, S. Andr, G. Lumay, N. Vandwalle, F. Boschini, R. Cloots, and B. Vertruyen, "Mullite Coatings on Ceramic Substrates: Stabilization of
$Al_2O_3-SiO_2$ Suspensions for Spray Drying of Composite Granules Suitable for Reactive Plasma Spraying," J. Eur. Ceram. Soc., 29 2169-75 (2009). https://doi.org/10.1016/j.jeurceramsoc.2009.01.031 -
L. Wang, Y. Wang, X. G. Sun, J. Q. He, Z. Y. Pan, and L. L. Yu, "Preparation and Characterization of Nanostructured
$La_2Zr_2O_7$ Feedstock Used for Plasma Spraying," Powder Technol., 212 267-77 (2011). https://doi.org/10.1016/j.powtec.2011.06.001 - Y. Bai, J. J. Tang, Y. M. Qu, S. Q. Ma, C. H. Ding, J. F. Yang, L. Yu, and Z. H. Han, "Influence of Original Powders on the Microstructure and Properties of Thermal Barrier Coatings Deposited by Supersonic Atmospheric Plasma Spraying, Part I: Microstructure," Ceram. Int., 39 5113-24 (2013). https://doi.org/10.1016/j.ceramint.2012.12.007
- S. J. Lukasiewicz, "Spray-Drying Ceramic Powder," J. Am. Ceram. Soc., 72 [4] 617-24 (1989). https://doi.org/10.1111/j.1151-2916.1989.tb06184.x
- H. Zhang, Y. Xie, L. Huang, S. Huang, X. Zheng, and G. Chen, "Effect of Feedstock Particle Sizes on Wear Resistance of Plasma Sprayed Fe-based Amorphous Coatings," J. Surf. Coat. Technol., 258 495-502 (2014). https://doi.org/10.1016/j.surfcoat.2014.08.050
- C. Kim, Y. S Heo, T. W. Kim, and K. S. Lee, "Fabrication and Characterization of Zirconia Thermal Barrier Coatings by Spray Drying and Atmospheric Plasma Spraying (in Koran)," J. Korean Ceram. Soc., 50 [5] 326-32 (2013). https://doi.org/10.4191/kcers.2013.50.5.326