과제정보
연구 과제번호 : BK21플러스
연구 과제 주관 기관 : 서울대학교
참고문헌
- ACI 318 (2014), Building code requirements for structural concrete and commentary, American Concrete Institute, Farmington Hills, MI, USA.
- AISC (2011), Steel construction manual, American Institute of Steel Construction, Chicago, IL, USA.
- AISC (2011), Design examples V14.2, American Institute of Steel Construction, Chicago, IL, USA.
- Eurocode 2 (2004), Design of concrete structures, Part 1.1: General rules and rules for building, European Committee for Standardization, Brussels, Belgium.
- Eurocode 4 (2004), Design of composite steel and concrete structures, Part 1.1: General rules and rules for building, European Committee for Standardization, Brussels, Belgium.
- Geschwindner, L.F. (2010), "Discussion of reinforced concrete members under flexure and combined flexure and direct compression", Eng. J., 47(2), 483-498.
- Leon, R.T. and Hajjar, J.F. (2008), "Limit state response of composite columns and beam-columns part II: Application of design provisions for the 2005 AISC specification", Eng. J., 45(1), 21-46.
- Lee, C.-H., Kang, T.H.-K., Kim, S.-Y. and Kang, K. (2016), "Strain compatibility method for the design of short rectangular concrete-filled tube columns under eccentric axial loads", Constr. Bldg. Mat., 121, 143-153. https://doi.org/10.1016/j.conbuildmat.2016.05.145
- Lee, J.D., Yoon, J.K. and Kang, T.H.-K. (2016), "Combined half precast concrete slab and post-tensioned slab topping system for basement parking structures", J. Struct. Integr. Maint., 1(1), 1-9. https://doi.org/10.1080/24705314.2016.1153281
- Kang T.H.-K., Wallace, J.W. and Elwood, K.J. (2008), "Nonlinear modeling of flat-plate systems", J. Struct. Eng., 135(2), 147-158.
- Kim, J.-W., Lee, C.-H. and Kang, T.H.-K. (2014), "Shearhead reinforcement for concrete slab to concretefilled tube column connection", ACI Struct. J., 111(3), 629-638.
- Probst, A.D., Kang, T.H.-K., Ramseyer, C. and Kim, U. (2010), "Composite flexural behavior of full-scale concrete-filled tubes without axial loads", J. Struct. Eng., 136(11), 1401-1412. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000241
- Yang, K.-H. and Kang, T.H.-K. (2011), "Equivalent strain distribution factor for unbonded tendon stress at ultimate", ACI Struct. J., 108(2), 217-226.
- Kang, L., Leon, R.T. and Lu, X. (2015), "Shear strength analyses of internal diaphragm connections to CFT columns", Steel Compos. Struct., 18(5), 1083-1101. https://doi.org/10.12989/scs.2015.18.5.1083
- Manikandan, P. and Sukuma, S. (2016), "Effect of stiffened element and edge stiffener in strength and behaviour of cold formed steel built-up beams", Adv. Comput. Des., 1(2), 207-220. https://doi.org/10.12989/ACD.2016.1.2.207
피인용 문헌
- Flexural Testing of Circular Concrete-Filled Tubes without Axial Forces vol.115, pp.2, 2018, https://doi.org/10.14359/51701134
- Bending and Shear Behaviour of Waste Rubber Concrete-Filled FRP Tubes with External Flanges vol.13, pp.15, 2021, https://doi.org/10.3390/polym13152500