DOI QR코드

DOI QR Code

지대주 경사각이 지르코니아 전부도재관의 변연적합도에 미치는 영향

The Effect of Abutment Inclined Angle on the Marginal Fit of Zirconia All-ceramic Crown

  • 이서연 (부산가톨릭대학교 보건과학대학 치기공학과) ;
  • 정인성 (부산가톨릭대학교 보건과학대학 치기공학과) ;
  • 전병욱 (부산가톨릭대학교 보건과학대학 치기공학과)
  • Lee, Seo-Yeon (Department of Dental Laboratory Science, College of Health Science, Catholic University of Pusan) ;
  • Chung, In-Sung (Department of Dental Laboratory Science, College of Health Science, Catholic University of Pusan) ;
  • Jeon, Byung-Wook (Department of Dental Laboratory Science, College of Health Science, Catholic University of Pusan)
  • 투고 : 2016.05.01
  • 심사 : 2016.09.09
  • 발행 : 2016.09.30

초록

Purpose: The present study was performed to investigate the effect of abutment inclined angle on the marginal fit of zirconia all-ceramic crown. Methods: The Ti abutments with 3 different inclined angle($2^{\circ}$, $4^{\circ}$ and $6^{\circ}$) were fabricated. The zirconia copings were fabricated for each abutment by using dental CAD/CAM system. The manufactured zirconia copings were duplicated through silicone replica technique, and a replicated specimen was sectioned in the center of bucco-lingual and mesio-distal axial to measure the marginal fit by using a stereo microscope. The results were analyzed using a one-way ANOVA with SPSS 22.0 for Windows(${\alpha}=0.05$). Results: On the bucco-lingual axial, marginal fit was the RL3($41.5{\pm}3.4{\mu}m$), RL2($44.3{\pm}4.3{\mu}m$) and RL1($47.5{\pm}5.7{\mu}m$), respectively. On the mesio-distal axial, marginal fit was the RL3($41.1{\pm}3.7{\mu}m$), RL2($45.7{\pm}5.3{\mu}m$) and RL1($46.2{\pm}4.5{\mu}m$), respectively. One-way ANOVA showed statistically significant difference between groups for marginal fit(p<0.05). Conclusion: For marginal fit of the abutments inclined angle, RL3 specimen was superior. The abutment inclined angle had influence on marginal fit of the zirconia copings. The marginal fit of each group were within clinically acceptable range.

키워드

참고문헌

  1. Al-Amleh B, Lyons K, Swain M. Clinical trials in zirconia: a systematic review. J Oral Rehabil, 37(8), 641-652, 2010. https://doi.org/10.1111/j.1365-2842.2010.02094.x
  2. Annerstedt AL, Engstroma U, Hanssona A, Janssona T, Karlssona S, Liljhagena H, Lindquista E, Rydhammara E, Tyreman-Bandhedea M, Svenssona P, Wandela U. Axial wall convergence of full veneer crown preparations. Documented for dental students and general practitioners. Acta Odontol Scand, 54(2), 109-112, 1996. https://doi.org/10.3109/00016359609006014
  3. An SY, Kim ST, Choi HM, Lee JH, Moon HS. Evaluating the marginal fit of zirconia copings with digital impressions with an intraoral digital scanner. J Prosthet Dent, 112(5), 1171-1175, 2014. https://doi.org/10.1016/j.prosdent.2013.12.024
  4. Bader JD, Rozier RG, McFall WT, Ramsey DL. Effect of crown margins on periodontal conditions in regularly attending patients. J Prosthet Dent, 65(1), 75-79, 1991. https://doi.org/10.1016/0022-3913(91)90053-Y
  5. Besimo C, Jeger C, Guggenheim R. Marginal adaptation of titanium frameworks produced by CAD/CAM technique. Int J Prosthodont, 10(6), 541-546, 1997.
  6. Beuer F, Edelhoff D, Germet W, Naumann M. Effect of preparation angles on the precision of zirconia crown copings fabricated by CAD/CAM system. Dent Mater J, 27(6), 814-820, 2008. https://doi.org/10.4012/dmj.27.814
  7. Choi KH. Influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with a lingual slot. Department of Dentistry Graduate School Kyungpook National University, Doctor's thesis, 2015.
  8. Chung IS, Jeon BW, Kim WY. Comparison of marginal fitness of zirconia copings according to impression techniques and zirconia blocks. Journal of the Korea Contents Association, 16(1), 151-157, 2016.
  9. Contrepois M, Soenen A, Bartala M, Laviole O. Marginal adaptation of ceramic crown: a systematic review. J Prosthet Dent, 110(6), 447-454, 2013. https://doi.org/10.1016/j.prosdent.2013.08.003
  10. Felton DA, Kanoy BE, Bayne SC, Wirthman GP. Effect of in vivo crown margin discrepancies on periodontal health. J Prosthet Dent, 65(3), 357-364, 1991. https://doi.org/10.1016/0022-3913(91)90225-L
  11. Fischer H, Weber M, Marx R. Life time prediction of all-ceramic bridges by computational methods. J Dent Res, 82(3), 238-242, 2003. https://doi.org/10.1177/154405910308200317
  12. Grasso JE, Nalbandian J, Sanford C, Bailit H. Effect of restoration quality on periodontal health. J Prosthet Dent, 53(1), 14-19, 1985. https://doi.org/10.1016/0022-3913(85)90056-3
  13. Han SH, Cho JH, Lee EJ, Jeong SI, Oh NS. FEA estimates of margin design in all ceramic crowns. J Korean Acad Prosthodont, 46(1), 1-11, 2008.
  14. Jorgensen DK. The relationship between retention and convergence angle in cemented veneer crowns. Acta Odontol Scand, 13(1), 35-40, 1955. https://doi.org/10.3109/00016355509028171
  15. Kim JW, Heo YR, Kim HJ, Chung CH. A comparative study on the fit and screw joint stability of ready-made abutment and CAD-CAM custom-made abutment. J Korean Acad Prosthodont, 51(4), 276-283, 2013. https://doi.org/10.4047/jkap.2013.51.4.276
  16. Kim KB, Kim SH, Kim JH. Effect of Porcelain Firing Process on the Marginal and Internal Fit of Ni-Cr Alloy Metal-Ceramic Crown. Journal of Dental Hygiene Science, 14(3), 405-410, 2014. https://doi.org/10.17135/jdhs.2014.14.3.405
  17. Koo JY, Lim JH, Cho IH. Marginal fidelity according to the margin types of all ceramic crowns. J Kor Acad Prosthodont, 35(3), 445-457, 1997.
  18. Kosmac T, Oblak C, Marion L. The effect of dental grinding and sandblasting on ageing fatigue behavior of dental zirconia(Y-TZP) ceramics. J Eur Ceram Soc, 28(5), 1085-1090, 2008. https://doi.org/10.1016/j.jeurceramsoc.2007.09.013
  19. Lee HH. A clinical consideration of current dental zirconia CAD/CAM restorations. Korean Dental Association, 49(5), 279-285, 2011.
  20. McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J, 131(3), 107-111, 1971. https://doi.org/10.1038/sj.bdj.4802708
  21. Moon HH. A finite element study on the strain of the maxillary anterior implant by the abutment angulation. Graduate School of Clinical Dentistry Ewha Womans University, Master's thesis, 2008.
  22. Ostlund LE. Cavity design and mathematics: their effect on gaps at the margins of cast restorations. Oper Dent, 10(4), 122-137, 1985.
  23. Pera P, Gilodi S, Bassi F, Carossa S. In vitro marginal adaptation of alumina porcelain ceramic crowns. J Prosthet Dent, 72(6), 585-590. 1994. https://doi.org/10.1016/0022-3913(94)90289-5
  24. Rahme HY, Tehini GE, Adib SM, Ardo AS, Rifai KT. In vitro evaluation of the "Replica Technique" in the measurement of the fit of Procera crowns. J Contemp Dent Pract, 9(2), 25-32, 2008.
  25. Shillingburg HT, Hobo S, Whitsett LD, Jacobi R, Brackett SE. Fundamentals of fixed prosthodontics. Quintessence Publishing Co., 120-152, 1997.
  26. Song HY, Cho LR. Marginal accuracy and fracture strength of Targis/Vectris Crowns prepared with different preparation designs. J Korean Acad Prosthodont, 38(6), 791-799, 2001.