DOI QR코드

DOI QR Code

Influence of brass laminate volume fraction on electromechanical properties of externally laminated coated conductor tapes

  • Bautista, Zhierwinjay M. (Department of Mechanical Design Engineering, Andong National University) ;
  • Shin, Hyung-Seop (Department of Mechanical Design Engineering, Andong National University) ;
  • Lee, Jae-Hun (SuNAM Co Ltd.) ;
  • Lee, Hunju (SuNAM Co Ltd.) ;
  • Moon, Seung-Hyun (SuNAM Co Ltd.)
  • Received : 2016.08.23
  • Accepted : 2016.09.23
  • Published : 2016.09.30

Abstract

The enhancement of mechanical properties of coated conductor (CC) tapes in practical application are usually achieved by reinforcing through lamination or electroplating metal layers on either sides of the CC tape. Mechanical or electromechanical properties of the CC tapes have been largely affected by the lamination structure under various loading modes such as tension, bending or even cyclic. In this study, the influence of brass laminate volume fraction on electromechanical properties of RCE-DR processed Gadolinium-barium-copper-oxide (GdBCO) CC tapes was investigated. The samples used were composed of single-side and both-side laminate of brass layer to the Cu-stabilized CC tape and their $I_c$ behaviors were compared to those of the Cu-stabilized CC tape without external lamination. The stress/strain dependences of $I_c$ in laminated CC tapes under uniaxial tension were analyzed and the irreversible stress/strain limits were determined. As a result, the increase of brass laminate volume fraction initially increased the irreversible strain limit and became gradual. The corresponding irreversible stress limit, however, showed no difference even though the brass laminate volume fraction increased to 3.4. But the irreversible load limit linearly increased with the brass laminate volume fraction.

Keywords

References

  1. N. Cheggour, J. W. Ekin, Y. -Y. Xie, V. Selvamanickam, C. L. H. Thieme, and D. T. Verebelyi, "Enhancement of the irreversible axial-strain limit of Y-Ba-Cu-O-coated conductors with the addition of a Cu layer," Appl. Phys. Lett., vol. 87, p. 212505, 2005. https://doi.org/10.1063/1.2136231
  2. H. S. Shin, and Marlon J. Dedicatoria, "Variation of the strain effect on the critical current due to external lamination in REBCO coated conductors," Supercond. Sci. Technol., vol. 25, p. 054013, 2012. https://doi.org/10.1088/0953-2048/25/5/054013
  3. M. J. Dedicatoria and H. S. Shin, "Analysis on Stress/Strain Tolerances of Ic in Externally Laminated GdBCO CC Tapes," IEEE Trans. Appl., vol. 23, p. 8400504, 2013. https://doi.org/10.1109/TASC.2012.2234196
  4. M. Sugano, T. Nakamura, T. Manabe, K. Shikimachi, N. Hirano, and S. Nagaya, "The intrinsic strain effect on critical current under magnetic field parallel to the c-axis for a MOCVD-YBCO-coated conductor," Supercond. Sci. Technol., vol. 21, p. 115019, 2008. https://doi.org/10.1088/0953-2048/21/11/115019
  5. W. Goldacker, F. Grilli, E. Pardo, A. Kario, S. Schlachter and M. Vojenciak, "Roebel cables from REBCO coated conductors: a one-century-old concept for the superconductivity of the future," Supercond. Sci. Technol., vol. 27, p. 093001, 2014. https://doi.org/10.1088/0953-2048/27/9/093001
  6. H. S. Shin, Z. Bautista, A. Gorospe, J. H. Lee, H. Lee and S. H. Moon, "Electro-Mechanical Properties of Single-Side Brass Foil Laminated Coated Conductor Tapes at 77 K Under Self-Field," IEEE Trans. on Appl. Supercond., vol. 26, p. 8401805, 2016 .
  7. M. Sugano, S. Machiya, H. Oguro, M. Sato, T. Koganezawa, T. Watanabe, K. Shikimachi, N. Hirano, S. Nagaya, T. Izumi, and T. Saitoh, "The effect of the 2D internal strain state on the critical current in GdBCO coated conductors," Supercond. Sci. Technol., vol. 25, p. 054014, 2012. https://doi.org/10.1088/0953-2048/25/5/054014
  8. A. R. Nisay, and H. S. Shin, "Mechanical and electro-mechanical analysis in differently stabilized GdBCO coated conductor tapes with stainless steel substrate," Prog. Supercond. Cryog., vol. 15, pp. 29-33, 2013.
  9. H. S. Shin, M. Dedicatoria, A. Gorospe, J. R. Dizon, H. Oguro and S. Awaji, "Strain and Magnetic Field Response of Ic in Reinforced GdBCO Coated Conductor Tapes at 77 K," AIP conference Proceedings, vol. 1574, pp. 239-244, 2014.
  10. S. Ochiai, H. Okuda, T. Arai, M. Sugano, K. Osamura, and W. Prusseit, "Influence of Copper volume fraction in Tensile Strain/Stress tolerances of Critical Current in a Copper-Plated DyBCO-Coated Conductor," The Japan Institute of Metals, vol. 54 pp. 269-275, 2013.

Cited by

  1. Effects of differently hardened brass foil laminate on the electromechanical property of externally laminated CC tapes vol.18, pp.4, 2016, https://doi.org/10.9714/psac.2016.18.4.021
  2. Characterization of electromechanical properties of Sn-Cu double layer stabilized GdBCO coated conductor tapes at 77 K vol.19, pp.4, 2016, https://doi.org/10.9714/psac.2017.19.4.026