Abstract
The characteristics of ammonia generated from alkaline stabilization facilities was investigated which are for organic sewage sludge from wastewater treatment plants. The highest concentration of ammonia was found in mixing and curing process in alkaline stabilization facility and ammonia mainly showed a range of 87.78 ppm($66.62mg/m^3$) to 1,933 ppm($1,467.01mg/m^3$) by detection tube. This is presumed to occur because nitrogen oxides are converted into ammonia as the sewage sludge is mixed with lime. In some facilities, hydrogen sulfide and methyl mercaptan were detected in relatively high concentrations, but odor materials except ammonia were not detected in most of the facilities. The concentration of ammonia caused by process was generally high in the order of "mixing > curing > output > storage > drying > input." It was found that odor compounds are removed by wet absorption using sulfuric acid and sodium hypochlorite in the 5 alkaline stabilization facilities currently in operation. Each facility was designed to meet the concentration of after-treatment emission in 1 ppm($0.76mg/m^3$), 50 ppm($37.95mg/m^3$) or 100 ppm($75.89mg/m^3$), but no facility satisfied the design standard for their emssion limit. In case of ammonia, some workplaces in alkaline stabilization facilities exceeded the exposure limits established by the Ministry of Labor. It appears that proper ventilation should be provided for the safety of workers in future. No odor compound including ammonia was found by detection tubes in the border of the facilities, but trace amounts of odor compounds are expected to exist, given the current operational status of facilities.
본 연구는 하수처리시설의 유기성슬러지가 알칼리 안정화 처리시설을 거쳐 발생되는 암모니아의 특성을 조사하였다. 암모니아 검지관을 통해 알칼리 안정화 처리시설의 혼합 및 양생 공정에서 87.78 ppm($66.62mg/m^3$) ~ 1,933 ppm($1,467.01mg/m^3$) 으로 높은 농도의 암모니아가 검출 되었다. 이는 하수처리오니의 질소산화물이 생석회와 혼합되며 암모니아로 변환되는 것으로 예상된다. 일부 시설에서는 황화수소, 메틸메르캅단이 비교적 높은 농도로 검출되었으나, 대부분의 시설에서는 암모니아를 제외한 악취 물질은 검출되지 않았다. 공정 중 암모니아의 농도는 일반적으로 혼합 > 양생 > 반출 > 저장 > 건조 > 입고 순으로 높게 나타났다. 현재 운영 중인 5개 알칼리 안정화 처리시설에서 발생된 악취 물질들은 황산과 차아염소산 등을 사용하여 습식처리하는 것으로 조사되었다. 각 시설은 1 ppm($0.76mg/m^3$), 50 ppm($37.95mg/m^3$) 또는 100 ppm($75.89mg/m^3$)으로 방출되도록 설계되었으나 설계 기준을 만족하지 못하는 것으로 나타났다. 암모니아의 경우, 일부 알칼리 안정화 처리시설은 노동부가 정한 노출기준을 초과하는 것으로 조사되었다. 이것은 향후 근로자의 안전을 위해 적절한 환기가 필요함을 의미하고 있다. 또한, 암모니아를 포함한 악취물질이 시설의 부지경계선에서 검지관으로 검출되지 않았으나, 현재의 운전상태로 볼 때, 미량의 악취물질이 존재할 것으로 판단된다.